D-Link Dir655 B1 Manual

47D-Link DIR-655 User Manual
Section 3 - Configuration
Static IPv6
Select Static IPv6 from the drop-down menu.
Enter the address settings supplied by your Internet provider 
(ISP). 
Enter the LAN (local) IPv6 address for the router. 
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
Select Stateful  (DHCPv6), SLAAC  +  RDNSS  or SLAAC  + 
Stateless DHCPv6. 
Enter the start IPv6 Address for the DHCPv6 range for your 
local computers.
Enter  the  end  IPv6...

48D-Link DIR-655 User Manual
Section 3 - Configuration
Autoconfiguration
Select Autoconfiguration  (Stateless/DHCPv6)  from  the 
drop-down menu.
Select either Obtain DNS server address automatically or 
Use the following DNS Address.
Enter the primary and secondary DNS server addresses. 
Enter the LAN (local) IPv6 address for the router. 
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
Select Stateful  (DHCPv6), SLAAC  +  RDNSS  or SLAAC  + 
Stateless DHCPv6....

49D-Link DIR-655 User Manual
Section 3 - Configuration
PPPoE
Select PPPoE from the drop-down menu.
Enter  the  PPPoE  account  settings  supplied  by  your  Internet 
provider (ISP). 
Select Static if your ISP assigned you the IP address, subnet mask, 
gateway, and DNS server addresses. In most cases, select Dynamic.
Enter the IP address (Static PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password in the 
next box.
Enter the ISP Service Name (optional).
Select...

50D-Link DIR-655 User Manual
Section 3 - Configuration
Autoconfiguration Type:
IPv6 Advertisement 
Lifetime:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6.
Enter the IPv6 Address Lifetime (in minutes).  

51D-Link DIR-655 User Manual
Section 3 - Configuration
IPv6 in IPv4 Tunneling
Select IPv6 in IPv4 Tunnel from the drop-down menu.
Enter the settings supplied by your Internet provider (ISP). 
Enter the LAN (local) IPv6 address for the router. 
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless 
DHCPv6. 
Enter  the  start  IPv6  Address  for  the  DHCPv6  range  for  your  local 
computers.
Enter  the...

52D-Link DIR-655 User Manual
Section 3 - Configuration
6 to 4
Select 6 to 4 from the drop-down menu.
Enter the IPv6 settings supplied by your Internet provider (ISP). 
Enter the primary and secondary DNS server addresses. 
Enter the LAN (local) IPv6 address for the router. 
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless 
DHCPv6. 
Enter  the  start  IPv6  Address  for  the  DHCPv6  range  for  your...

53D-Link DIR-655 User Manual
Section 3 - Configuration
6rd
Select 6rd from the drop-down menu.
Enter  the  address  settings  supplied  by  your  Internet  provider 
(ISP). 
Enter the LAN (local) IPv6 address for the router. 
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
Select Stateful (DHCPv6), SLAAC+RDNSS or SLAAC + Stateless 
DHCPv6. 
Enter the Router Advertisement Lifetime (in minutes).
My IPv6 Connection:
6RD Settings:
LAN IPv6 Address:
LAN Link-Local...

54D-Link DIR-655 User Manual
Section 3 - Configuration
Select Link-Local  Only  from  the  drop-down 
menu.
Displays the IPv6 address of the router.
My IPv6 Connection:
LAN IPv6 Address 
Settings:
Link-Local Connectivity  

55D-Link DIR-655 User Manual
Section 3 - Configuration
The DIR-655 can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically 
redirected to local servers in the LAN (Local Area Network). 
The DIR-655 firewall feature filters out unrecognized packets to protect your LAN network so all computers networked with the DIR-655 are invisible 
to the outside world. If you wish, you can make some of the LAN computers accessible from the...

56D-Link DIR-655 User Manual
Section 3 - Configuration
This will allow you to open a single port. If you would like to open a range of ports, refer to the next page.
Enter a name for the rule or select an application from the 
drop-down menu. Select an application and click