D-Link Router DIR-626L User Manual

57
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
IPv6 In\berne\b \fonnec\bion Se\bup Wizard
On this page, the user can c\bnfigure the IP\f6 C\bnnecti\bn type using the IP\f6 Internet C\bnnecti\bn Setup Wizard.
Click the  IPv6.Internet .Connection .Setup .Wizard  butt\bn and the r\buter will guide 
y\bu thr\bugh a few simple steps t\b get y\bur netw\brk up and running.
Click  Next t\b  c\bntinue  t\b  the  next  page.  Click  Cance\b  t\b  discard  the  changes  made 
and return t\b the main...

58
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
H\bwe\fer,  if  the  aut\bmatic  detecti\bn  fails,  the  user  will  be  pr\bmpt  t\b  either  Try.
again. \br t\b click \bn the  Guide.me.through. the.IPv6. settings butt\bn t\b initiate the 
manual c\bntinual \bf the wizard.
There  are  se\feral  c\bnnecti\bn  types  t\b  ch\b\bse  fr\bm.  If  y\bu  are  unsure  \bf  y\bur 
c\bnnecti\bn meth\bd, please c\bntact y\bur IP\f6 Internet Ser\fice Pr\b\fider. 
Note:  If  using  the  PPP\bE...

59
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
IPv6.over.PPPoE
After  selecting  the  IP\f6  \b\fer  PPP\bE  \bpti\bn,  the  user  will  be  able  t\b  c\bnfigure  the 
IP\f6  Internet  c\bnnecti\bn  that  requires  a  username  and  passw\brd  t\b  get  \bnline. 
M\bst DSL m\bdems use \lthis type \bf c\bnnecti\bn.
The f\bll\bwing parameters will be a\failable f\br c\bnfigurati\bn:
PPPoE.Session: Select  the  PPP\bE  Sessi\bn  \falue  used  here.  This 
\bpti\bn  will  state  that  this...

60
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
Static.IPv6.Address.Connection
This m\bde is used when y\bur ISP pr\b\fides y\bu with a set IP\f6 addresses that d\bes n\bt change. The IP\f6 inf\brmati\bn is manually entered in y\bur 
IP\f6  c\bnfigurati\bn  settings. Y\bu  must  enter  the  IP\f6  address,  Subnet  Prefix  Length,  Default  Gateway,  Primary  DNS  Ser\fer,  and  Sec\bndary  DNS 
Ser\fer. Y\bur ISP pr\b\fides y\bu with all this inf\brmati\bn.
Use.Link-Loca\b.
Address:...

61
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
The f\bll\bwing parameters will be a\failable f\br c\bnfigurati\bn:
6rd IPv6 Prefix: Enter the 6rd IP\f6 address and prefix \falue used 
here.
IPv4 Address: Enter the IP\f4 address used here.
Mask Leng\bh: Enter the IP\f4 mask length used \lhere.
Assigned IPv6 Prefix: Displays the IP\f6 assigned prefix \falue here.
6rd Border Relay IPv4  Address:Enter the 6rd b\brder relay IP\f4 address used here.
IPv6 DNS Server: Enter the primary DNS Ser\fer...

62
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
IPv6 Manual Se\bup
There are se\feral c\bnnecti\bn types t\b ch\b\bse fr\bm: Aut\b Detecti\bn, Static IP\f6, Aut\bc\bnfigurati\bn (SLAAC/DHCP\f6), PPP\bE, 
IP\f6 in IP\f4 Tunnel, 6t\b4, 6rd, and Link-l\bcal. If y\bu are unsure \bf y\bur c\bnnecti\bn meth\bd, please c\bntact y\bur IP\f6 Internet 
Ser\fice Pr\b\fider. 
Note:  If using the PPP\bE \bpti\bn, y\bu will need t\b ensure that any PPP\bE client s\bftware \bn y\bur c\bmputers has been...

63
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
S\ba\bic IPv6
Select Static.IPv6 fr\bm the dr\bp-d\bwn menu.
Enter the address settings supplied by y\bur Internet pr\b\fider 
(ISP). 
Enter the LAN (l\bcal) I\lP\f6 address f\br the r\buter. 
Displays the R\buter’s LAN Link-L\bcal Address.
Check t\b enable the Aut\bc\bnfigurati\bn feature.
Select  Statefu\b .(DHCPv6) , SLAAC .+ .RDNSS   \br SLAAC .+.
State\bess.DHCPv6. 
Enter the start IP\f6 Address f\br the DHCP\f6 range f\br y\bur 
l\bcal...

64
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
Au\boconfigura\bion
Select  Autoconfiguration .(State\bess/DHCPv6)   fr\bm  the 
dr\bp-d\bwn menu.
Select either  \fbtain.DNS.server. address. automatica\b\by \br 
Use.the.fo\b\bowing.DNS.Address.
Enter the primary and sec\bndary DNS ser\fer addresses. 
Enter the LAN (l\bcal) I\lP\f6 address f\br the r\buter. 
Displays the R\buter’s LAN Link-L\bcal Address.
Check t\b enable the Aut\bc\bnfigurati\bn feature.
Select  Statefu\b .(DHCPv6) , SLAAC .+...

65
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
PPPoE
Select PPPoE fr\bm the dr\bp-d\bwn menu.
Enter  the  PPP\bE  acc\bunt  settings  supplied  by  y\bur  Internet 
pr\b\fider (ISP). 
Select  Static if y\bur ISP assigned y\bu the IP address, subnet mask, 
gateway, and DNS ser\fer addresses. In m\bst cases, select  Dynamic.
Enter the IP address (Static PPP\bE \bnly).
Enter y\bur PPP\bE user name.
Enter y\bur PPP\bE passw\brd and then retype the passw\brd in the 
next b\bx.
Enter the ISP...

66
D-Link DIR-626L User Manual
Secti\bn 3 - C\bnfigurati\bn
Au\boconfigura\bion Type:
IPv6 Address Range S\bar\b: IPv6 Address Range End: IPv6 Address Life\bime: Select Statefu\b.(DHCPv6), SLAAC.+.RDNSS \br SLAAC.+.State\bess.DHCPv6.
Enter the start IP\f6 Address f\br the DHCP\f6 range f\br y\bur l\bcal c\bmputers.
Enter the end IP\f6 Address f\br the DHCP\f6 range f\br y\bur l\bcal c\bmputers.
Enter the IP\f6 Address Lifetime (in minutes).