DELL 2130cn User Manual

Printer Maintenance   
The  Printer Maintenance  tab includes the  System Settings ,  Paper Density ,  Registration Adjustment ,  Adjust Altitude ,  Reset Defaults ,  Non - Dell Toner , 
Initialize PrintMeter ,  Tray Settings ,  TCP/IP Settings , and  Network Settings  pages.  
   
System Settings  
Purpose:  
To Use these settings to configure the printers power management, warning tones, time - out time, operator panel language setting, job log auto print, 
position of the Print ID, setting of the dump...

   
Paper Density  
Purpose:  
To specify the paper density settings.  
Values:  
   
Registration Adjustment  
Purpose:  
To set Color Registration Adjustment (individual yellow, magenta, cyan correction) settings. When  Auto Registration Adjustment  is set to  On , the printer 
prints the color registration chart and adjusts the color registration by using the chart. This function is required after the printer is set up or moved.  
Values:   Bottom Right  
Print Text   Off   Does not print the received...

   
Adjust Altitude  
Purpose:  
To specify the altitude of the location where the printer is installed.   
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed by specifying the altitude of the 
location where the printer is being used.  
Values:  
   
Reset Defaults  
Purpose:  
To initialize the NV (nonvolatile) memory for system parameters. After executing this function to automatically restart the printer, the menu parameters, or 
data...

   
Initialize PrintMeter  
Purpose:  
To initialize the printers PrintMeter. Executing this function restarts the printer, and the value of the meter resets to 0.   
Values:  
   
Tray Settings  
Purpose:  
To specify the paper types and sizes for input trays respectively.  
Values:  Apply New Settings   After you complete the settings, press the  Apply New Settings  button to apply the changes.  
Restart printer to apply new settings   Press the  Restart printer to apply new settings  button to apply...

   
TCP/IP Settings  
Purpose:  
To configure TCP/IP settings.  
Values:  
   
Network Settings  
Purpose:  
To display the server settings of the  Dell Printer Configuration Web Tool .  
Values:  
Diagnosis   Tray 2 Paper Size * 2  
Specifies the size of paper loaded in the optional 250 - sheet feeder.  Letter (8.5 x 11)  
Folio (8.5 x 13)  
Legal (8.5 x 14)  
Executive (7.25 x 
10.5)  
Display Popup   Off   Does not display a popup message that prompts to set paper size and type when paper is loaded in...

The  Diagnosis  tab includes the  Chart Print ,  Machine Check ,  Paper Wrinkle Check Mode ,  Environment Sensor Info ,  Developer Stir Mode , and  Refresh 
Mode  pages.  
   
Chart Print  
Purpose:  
To print various charts that can be used for the printer  s diagnosis.  
Values:  
   
Machine Check  
Purpose:  
To check the operation of the printer  s components.  
Values:  
   
Paper Wrinkle Check Mode  
Purpose:  
To determine whether or not paper is wrinkled in the fuser.  
This function stops...

   
Environment Sensor Info  
Purpose:  
To output the printers internal environment sensor information to  Result  by pressing the  Get Environment Sensor Info  button.  
   
Developer Stir Mode  
Purpose:  
To rotate the developer motor and stir the toner in the toner cartridge.   
Values:  
   
Refresh Mode  
Purpose:  
To use up a toner cartridge or PHD unit when you need to replace it before the end of its life, or to stir the toner in a new toner cartridge.  
   
Values:  
Back to Contents Page...

Back to Contents Page    
 Understanding the Printer Menus   
   Report/List   
   Admin Menu   
   Tray Settings   
   Stored Print   
   Setting Panel Lock   
 
When your printer is configured as a network printer available to a number of users, the access to the  Admin Menu  menus can be limited. This prevents other 
users from using the operator panel to inadvertently change a printer user default that has been set by the administrator. In this case, you can access the 
Stored Print , and  Tray...

Purpose:  
To print the reports for the total number of pages printed. When printed using either the printer control panel or  Dell Printer Configuration Web Tool , the 
report will be titled  Print Volume Report .  
   
Color Test Page   
Purpose:  
To print a page for testing colors.  
   
Stored Document   
Purpose:  
To print a list of all files that are stored for  Secure Print  and  Proof Print  in the RAM disk.  
Admin Menu   
Use the  Admin Menu  menu to configure a variety of printer features....

To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network settings are reset to their default values.  
   
TCP/IP  
Purpose:  
To configure TCP/IP settings. Any changes made become effective after the printer is turned off and then on.  
Values:  
   
Protocol  
Purpose:  
To enable or disable each protocol. Any changes made become effective after the printer is turned off and then on.  
Values:  
   
IP Filter  
Purpose:    NOTE:  This item...