DELL 2130cn User Manual

To block data received from certain IP addresses through the wired or wireless network. You can set up to five IP addresses. Any changes made become 
effective after the printer is turned off and then on.  
Values:  
   
IEEE 802.1x  
Purpose:  
To disable the IEEE 802.1x authentication. Any changes made become effective after the printer is turned off and then on.  
   
Reset LAN  
Purpose:  
To initialize wired network data stored in NV (non - volatile) memory. After executing this function and...

printer. Enter 3 if your printer shares an electrical circuit with room lighting and you notice lights flickering.  
Select a high value if your printer is in constant use. Under most circumstances, this keeps the printer ready to operate with minimum warm - up time. Select a 
value between 1 and 30 minutes for power save mode if you want a balance between energy consumption and a shorter warm - up period.  
The printer automatically returns to the standby mode from the power saver mode when it receives...

Values:  
   
Auto Log Print  
Purpose:  
To automatically print a log of completed jobs after every 20 jobs.  
Values:  
Print logs can also be printed using the  Report/List   menu.  
   
Print ID  
Purpose:  
To specify a location where the user ID is printed.   
Values:  
   
Print Text  
Purpose:  
To specify whether the printer outputs PDL data, which is not supported by the printer, as text when the printer receives it. Text data is printed on A4 or 
Letter size paper.  
Values:  
   
Banner Sheet...

   
Values:  
   
RAM Disk  
Purpose:  
To allocate memory to the RAM disk file system for the Secure Print and Proof Print features. Any changes made become effective after the printer is turned off 
and then on.  
Values:  
   
Odd Page 2Sided  
Purpose:  
Specifies how the odd last page is printed when using duplex printing.  
Values:  
   
Substitute Tray  
Purpose:  
Specifies whether or not to use another size paper when the paper that is loaded in the specified tray does not match the paper size...

Purpose:  
Specifies the default measurement unit displayed after the numeric value on the operator panel.  
Values:  
   
Maintenance  
Use the  Maintenance  menu to initialize the NV (non - volatile) memory, configure the plain paper quality adjustment settings, and configure the security settings.  
   
F/W Version  
Purpose:  
To display the printers firmware version.  
   
Service Tag  
Purpose:  
To display the printers service tag.  
   
Paper Density  
Purpose:  
To specify paper density...

   
Adjust Fuser  
Purpose:  
To adjusts the fuser temperature setting for each paper type.  
Values:  
   
Auto Reg Adj  
Purpose:   
To specify whether to automatically perform color registration adjustment.  
Values:  
   
Color Reg Adj  
Purpose:  
To specify whether to manually perform color registration adjustment.  
Manual Color Registration Adjustments are required such as after the printer is moved.   Label   0*  
- 6  -  +6  
Coated   0*  
- 6  -  +6  
Coated Thick   0*  
- 6  -  +6  
Envelope...

Values:  
   
Adjust Altitude  
Purpose:  
To specify the altitude of the location where the printer is installed.   
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed by specifying the altitude of the 
location where the printer is being used.   
Values:  
   
Clean Developer  
Purpose:  
To set whether to stir toner in a new toner cartridge.  
   
Toner Refresh  
Purpose:  
To clean the toner in each toner cartridge.  
   
Drum Refresh...

Clear Storage  
Purpose:  
To clear all files that are stored as Secure, Store, and Proof Print in the optional memory.  
   
Non - Dell Toner  
Purpose:  
To specify whether or not to use another manufacturers toner cartridge.  
Values:  
   
PCL  
Use the  PCL  menu to change printer settings that only affect jobs using the PCL emulation printer language.  
   
Paper Tray  
Purpose:  
To specify the input tray.  
Values:  
   
Paper Size  
Purpose:  
To specify the default paper size.  
Values:...

Purpose:  
To specify how text and graphics are oriented on the page.  
Values:  
   
2 Sided  
Purpose:  
To set duplexing as the default for all print jobs. (Select  Duplex  from the printer driver to duplex only specific jobs.)  
Values:  
   
Font  
Purpose:  
To specify the default font from the fonts registered in the printer.  
Values:  
    Portrait*   Prints text and graphics parallel to the short edge of the paper.  
Landscape   Prints text and graphics parallel to the long edge of the paper....

Symbol Set  
Purpose:  
To specify a symbol set for a specified font.  
Values:  
   
Font Size  
Purpose:  
To specify the font size for scalable typographic fonts.  
Values:  
Font size refers to the height of the characters in the font. One point equals approximately 1/72 of an inch.  
See also:  
Pitch and Point Size  
   
Font Pitch  
Purpose:  
To specify the font pitch for scalable monospaced fonts.  
Values:  
Font pitch refers to the number of fixed - space characters in a horizontal inch of...