DELL 2330d User Manual
Have a look at the manual DELL 2330d User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
About Your Printer Understanding Printer Parts Understanding the Operator Panel Choosing the Right Cable Understanding Printer Parts Part Description 1 Front exit Slot from where the paper exits the printer. 2 Output bin extender Support for the paper as it exits the printer. 3 Multipurpose feeder cover Door to gain access to the multipurpose feeder. 4 Standard tray (Tray 1) Standard paper tray that can hold 250 sheets of paper. 5 Optional 550-sheet drawer (Tray 2) Tray that can be purchased separately to increase the amount of blank paper that your printer can hold. 6 Memory access door Door to access the printer memory. 7 Door release button Button to open the front cover of the printer. 8 Operator panel Panel on the printer to control print jobs. 9Multipurpose feeder Tray to manually load various paper types such as envelopes.
10Multipurpose feeder tray Support for the paper as it is loaded into the multipurpose feeder. 11 Extension tray Additional support for print media other than paper, such as envelopes, to prevent bending or wrinkling. 12 Width guides Guides for the print media loaded into the multipurpose feeder. 13 Width guide tab Slide the tab to adjust the width guides. Part Description 14 Express service code A series of numbers that identify your printer when you use support.dell.com or contact technical support. Enter the Express Service Code to direct your call when contacting technical support. NOTE: The Express Service Code is not available in all countries. 15 Supplies reorder label Information on where you can order toner cartridges or paper: visit www.dell.com/supplies . PartDescription 16 USB port Slot into which you plug the USB cable (sold separately). The other end of the USB cable plugs into your computer. Locally attaches printer to the computer. 17 Network port (2330dn only) Slot into which you plug the Ethernet cable (sold separately). The other end of the Ethernet cable plugs into the network port. Attaches printer to the network. 18 Parallel port Slot into which you plug the parallel cable (sold separately). The other end of the parallel cable plugs into your computer. Locally attaches printer to the computer. 19 Power cord connector Connects the printer to the power outlet using the supplied country-specific power cord. 20 Power switch Switch to turn the printer on or off.
Understanding the Operator Panel The operator panel contains: Power indicator light Two-line LCD display Six buttons 21Locking device Security lock that provides physical security to your printer. 22 Rear exit Door allows print jobs to exit the printer flat, such as those printed on transparencies or cardstock. Use the Icon To 1 Display View the number of copies to be printed as well as error codes. 2 Left arrow button Scroll through menus, submenus, or settings on the display. Move to the previous or next option. Each press moves one item in the list or to a different setting for a menu item. 3 Back button Return to the previous screen. 4 Menu button Open the menu. Pressing the menu button while in the menus will return the user to the top level menu screen NOTE: The menus are available only when the printer is in the Ready state. 5 Stop/Cancel button Cancel a print job in progress. Exit a menu or submenu, and return to the default screen. 6 Right arrow button Scroll through menus, submenus, or settings on the display. Move to the previous or next option. Each press moves one item in the list or to a different setting for a menu item. 7 Select button Select a menu or submenu item that appears on the display. Submit a chosen value or setting for the printer. 8 Indicator light Indicate the printer status: Green—The printer is warming up, processing data, or printing. Yellow—Operator intervention needed.
Choosing the Right Cable Your printer interconnection cable must meet the following requirements: ConnectionCable certification USB USB 2.0 Parallel IEEE-1284 10/100/1000 Ethernet CAT-5E
Maintaining Your Printer Ordering Supplies Storing Supplies Replacing Supplies Cleaning Your Printer Dell™ toner cartridges are available only through Dell. You can order more toner online at www.dell.com/supplies. Ordering Supplies Printer Attached to a Network 1. Type your printer IP address in your Web browser to launch the Dell Configuration Web Tool. 2 . Click www.dell.com/supplies . Printer Attached Locally to a Computer 1. In Windows Vista™ (default Start menu): a. Click ® Programs . b . Click Dell Printers . c . Click Dell 2330d/2330dn Laser Printer . In Windows ® XP and 2000 , Click Start ® Programs or All Programs ® Dell Printers® Dell 2330d/2330dn Laser Printer. 2 . Click Dell Printer Supplies Reorder Application . The Order Toner Cartridges window opens. 3 . Choose your printer model from the list. 4 . Enter your Dell printer Service Tag number. NOTE: Your Service Tag number is located inside the front cover of your printer. 5 . Click Visit Dells cartridge ordering website . CAUTION: Before performing any of the procedures listed in this section, read and follow the safety information in your Users Guide. CAUTION: It is recommended that Dell toner cartridges be used for your printer. Dell does not provide warranty coverage for problems caused by using accessories, parts, or components not supplied by Dell.
Storing Supplies Storing Print Media Use the following guidelines for proper print media storage. These help avoid paper feeding problems and uneven print quality. For best results, store print media in an environment where the temperature is approximately 21°C (70°F) and the relative humidity is 40%. Store cartons of print media on a pallet or shelf, rather than directly on the floor. If you store individual packages of print media out of the original carton, ensure that they rest on a flat surface so the edges do not buckle or curl. Do not place anything on top of the print media packages. Storing the Toner Cartridge Store the toner cartridge in the original packaging until you are ready to install it. Do not store the toner in: Temperatures greater than 40°C (104°F). An environment with extreme changes in humidity or temperature. Direct sunlight. Dusty places. A car for a long period of time. An environment where corrosive gases are present. An environment with salty air. Replacing Supplies Replacing the Imaging Drum You can determine approximately how full the imaging drum is by printing the printer settings configuration sheet. This helps you decide when you might need to order replacement supplies. To ensure print quality and to avoid damage to the printer, the printer stops operating after the imaging drum has reached a maximum of 30,000 pages. The printer automatically notifies you before the imaging drum reaches this point. While the printer may continue to function properly after the imaging drum has reached its official end -of-life, print quality significantly decreases until the imaging drum stops operating at the maximum of 30,000 pages. NOTICE: When replacing the imaging drum, do not leave it exposed to direct light for an extended period of time.
1. Turn the printer off. 2 . Open the front cover by pressing the door release button on the right side of the printer and lowering the cover. 3 . Pull the toner cartridge assembly up and out using the handle after pressing the button on the base of the imaging drum. 4 . Place the toner cartridge assembly on a flat, clean surface. 5 . Lift the base of the imaging drum, gently pull it up, and slide it out of the printer. 6 . Unpack the new imaging drum kit. Extended light exposure can cause print quality problems.
7. Install the toner cartridge assembly into the new imaging drum kit by aligning the white rollers on the toner cartridge with the white arrows on the tracks of the imaging drum kit and pushing the toner cartridge in as far as it will go. The cartridge clicks into place when correctly installed. 8 . Install the imaging drum kit with the toner cartridge assembly into the printer by aligning the blue arrow guides of the imaging drum kit with the blue arrows found in the printer and pushing the imaging drum into the printer as far as it will go. The imaging drum kit clicks into place when correctly installed. 9 . After you replace the imaging drum, you should reset the imaging drums counter. To reset the counter, see the instruction sheet that shipped with the new imaging drum kit. 10 . Close the front cover. Replacing the Toner Cartridge You can determine approximately how much toner is left in your cartridge by printing the printer settings configuration sheet. This helps you decide when you might need to order replacement supplies. When the Toner low message appears, or when you experience faded print, remove the toner cartridge. Firmly shake it side - to -side and front-to -back several times to redistribute the toner, and then reinsert it and continue printing. Repeat this procedure multiple times until print remains faded. When the print remains faded, replace the toner cartridge. NOTICE: Do not leave the new imaging drum kit exposed to direct light for an extended period of time. Extended light exposure can cause print quality problems. NOTICE: Resetting the imaging drums counter without replacing the imaging drum may damage your printer and void your warranty. NOTE: You can still print for a short time after the Toner low message appears, but print quality decreases as the toner level decreases.
1. Turn the printer off. 2 . Open the front cover by pressing the button on the right side of the printer and lowering the cover. 3 . Press the button on the base of the imaging drum and pull the toner cartridge assembly up and out using the handle. 4 . Unpack the new toner cartridge assembly. 5 . Rotate the cartridge in all directions to distribute the toner. 6 . Install the new toner cartridge assembly by aligning the white rollers on the toner cartridge with the arrows on the tracks of the imaging drum kit and pushing the toner cartridge in as far as it will go. The cartridge clicks into place when correctly installed. NOTICE: When replacing a toner cartridge, do not leave the new cartridge exposed to direct light for an extended period of time. Extended light exposure can cause print quality problems. NOTICE: When replacing a toner cartridge assembly, do not leave the new cartridge exposed to direct light for an extended period of time. Extended light exposure can cause print quality problems.
7. Close the front cover. Cleaning Your Printer Cleaning the Printhead Lens 1. Turn the printer off and unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding. 2 . Open the front cover by pressing the button on the right side of the printer and lowering the cover. 3 . With the toner cartridge still attached, lift the base of the imaging drum kit and gently pull it up and out of the printer. NOTE: Do not press the button on the base of the imaging drum kit. Place the imaging drum kit with the toner cartridge assembly on a flat, clean surface. CAUTION: Using controls, making adjustments, or performing procedures other than those specified in your user documentation or in the instructions provided to you by Dell may result in exposure to hazardous radiation. NOTICE: Do not leave the imaging drum kit and toner cartridge assembly exposed to direct light for an extended period of time. Extended light exposure can cause print quality problems.