Dell Drac 5 User Guide
Have a look at the manual Dell Drac 5 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 367
DRAC 5 Property Database Group and Object Definitions367
Default
^\ ()
NOTE: The ^ is the key.
Description
This key or key combination terminates text console redirection when using the
connect com2 command. The cfgSerialConsoleQuitKey value can be
represented by:
• ASCII value — For example: ^a
ASCII values may be represented using the following Escape Key codes:
(a) ^ followed by any alphabetic (a-z, A-Z)
(b) ^ followed by the listed special characters: [ ] ^ _
cfgSerialConsoleIdleTimeout...](http://img.usermanuals.tech/thumb/19/100828/w64_drac-5-user-guide-1509647461_d-366.png "Page 367
DRAC 5 Property Database Group and Object Definitions367
Default
^\ ()
NOTE: The ^ is the key.
Description
This key or key combination terminates text console redirection when using the
connect com2 command. The cfgSerialConsoleQuitKey value can be
represented by:
• ASCII value — For example: ^a
ASCII values may be represented using the following Escape Key codes:
(a) ^ followed by any alphabetic (a-z, A-Z)
(b) ^ followed by the listed special characters: [ ] ^ _
cfgSerialConsoleIdleTimeout...")
DRAC 5 Property Database Group and Object Definitions371 cfgNetTuningNic100MB (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (10 MBit) 1 (100 MBit) Default 1 Description Specifies the speed to use for the RAC NIC. This property is not used if the cfgNetTuningNicAutoNeg is set to 1 (enabled). cfgNetTuningNicFullDuplex (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (Half Duplex) 1 (Full Duplex) Default 1 Description Specifies the duplex setting for the RAC NIC. This property is not used if the cfgNetTuningNicAutoNeg is set to 1 (enabled). cfgNetTuningNicMtu (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 576 – 1500
372DRAC 5 Property Database Group and Object Definitions Default 1500 Description The size in bytes of the maximum transmission unit used by the DRAC 5 NIC. cfgNetTuningTcpSrttDflt (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 6 – 384 Default 6 Description The smoothed round trip time-out base default value for TCP retransmission round trip time in ½ second units. (Type hexadecimal values.) cfgOobSnmp The group contains parameters to configure the SNMP agent and trap capabilities of the DRAC 5. One instance of the group is allowed. The following subsections describe the objects in this group. cfgOobSnmpAgentCommunity (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values String. Maximum Length = 31. Default public
DRAC 5 Property Database Group and Object Definitions373 Description Specifies the SNMP Community Name used for SNMP Traps. cfgOobSnmpAgentEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 (TRUE) 0 (FALSE) Default 0 Description Enables or disables the SNMP agent in the RAC. cfgRacTuning This group is used to configure various RAC configuration properties, such as valid ports and security port restrictions. cfgRacTunePluginType NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 (TRUE) — Java Plug-in 0 (FALSE) — Native Plug-in Default 0 Description Configures the virtual KVM (vKVM) plug-in type.
374DRAC 5 Property Database Group and Object Definitions cfgRacTuneHttpPort (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 10 – 65535 Default 80 Description Specifies the port number to use for HTTP network communication with the RAC. cfgRacTuneHttpsPort (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 10 – 65535 Default 443 Description Specifies the port number to use for HTTPS network communication with the RAC. cfgRacTuneIpRangeEnable NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 (TRUE) 0 (FALSE)
DRAC 5 Property Database Group and Object Definitions375 Default 0 Description Enables or disables the IP Address Range validation feature of the RAC. cfgRacTuneIpRangeAddr NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values String, IP address formatted. For example, 192.168.0.44. Default 192.168.1.1 Description Specifies the acceptable IP address bit pattern in positions determined by the 1s in the range mask property ( cfgRacTuneIpRangeMask). cfgRacTuneIpRangeMask NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values Standard IP mask values with left-justified bits Default 255.255.255.0 Description String, IP-address formatted. For example, 255.255.255.0. cfgRacTuneIpBlkEnable NOTE: To modify this property, you must have Configure DRAC 5 permission.
376DRAC 5 Property Database Group and Object Definitions Legal Values 1 (TRUE) 0 (FALSE) Default 0 Description Enables or disables the IP address blocking feature of the RAC. cfgRacTuneIpBlkFailcount NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 2 – 16 Default 5 Description The maximum number of login failure to occur within the window before the login attempts from the IP address are rejected. cfgRacTuneIpBlkFailWindow NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 2 – 65535 Default 60 Description Defines the timespan in seconds that the failed attempts are counted. When the failure attempts age to this limit, the failures are dropped from the count.
DRAC 5 Property Database Group and Object Definitions377 cfgRacTuneIpBlkPenaltyTime NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 2 – 65535 Default 300 Description Defines the timespan in seconds that session requests from an IP address with excessive failures are rejected. cfgRacTuneSshPort (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 – 65535 Default 22 Description Specifies the port number used for the RAC SSH interface. cfgRacTuneTelnetPort (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 – 65535 Default 23
378DRAC 5 Property Database Group and Object Definitions Description Specifies the port number used for the RAC telnet interface. cfgRacTuneRemoteRacadmEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 (TRUE) 0 (FALSE) Default 1 Description Enables or disables the Remote RACADM interface in the RAC. cfgRacTuneConRedirEncryptEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 (TRUE) 0 (FALSE) Default 0 Description Encrypts the video in a console redirection session. cfgRacTuneConRedirPort (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 – 65535
DRAC 5 Property Database Group and Object Definitions379 Default 5901 Description Specifies the port to be used for keyboard and mouse traffic during Console Redirection activity with the RAC. NOTE: This object requires a DRAC 5 reset before it becomes active. cfgRacTuneConRedirVideoPort (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 1 – 65535 Default 5901 Description Specifies the port to be used for video traffic during Console Redirection activity with the RAC. NOTE: This object requires a DRAC 5 reset before it becomes active. cfgRacTuneAsrEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 (FALSE) 1 (TRUE) Default 1 Description Enables or disables the crash screen capture feature of the RAC.
380DRAC 5 Property Database Group and Object Definitions NOTE: This object requires a DRAC 5 reset before it becomes active. cfgRacTuneDaylightOffset (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values 0 – 60 Default 0 Description Specifies the daylight savings offset (in minutes) to use for the RAC Time. cfgRacTuneTimezoneOffset (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission. Legal Values -720 – 780 Default 0 Description Specifies the timezone offset (in minutes) from GMT/UTC to use for the RAC Time. Some common timezone offsets for timezones in the United States are shown below: -480 (PST — Pacific Standard Time) -420 (MST — Mountain Standard Time) -360 (CST — Central Standard Time) -300 (EST — Eastern Standard Time) cfgRacTuneWebserverEnable (Read/Write) NOTE: To modify this property, you must have Configure DRAC 5 permission.