DELL V505w User Manual

5.  Insert the adapter  into the back  of the printer until it   clicks into place.
You  are now ready  to  configure your  adapter  to  work  on your  wireless  network.
Removing and Reinstalling the Adapter
If  your  adapter  is not functioning properly, you might need  to  remove the adapter  and  reinstall it. 1.  Turn off your  printer, and  then  unplug  the power cable  from  the wall outlet.
2 .  Firmly  grasp the Dell Internal Network  Adapter  1150 by the side  tabs,  and  then  pull to...

3.  Reinstall  the adapter  following the installation instructions.  For  more  information, see  Installing the Dell Internal
Network  Adapter  1150.
Configuring the Printer for an Ethernet Connection
1.  Connect your  printer to  your  network using  an Ethernet cable  (sold separately).
2 .  Connect the power cable  to  the wall, and  then  press  the  Power button 
.
The  Ethernet wired icon 
 appears in the main menu  on the operator  panel.
3 .  Ensure  that  your  computer  is on,  and  then...

In Windows Vista:
1.  Click  ® Programs .
2 .  Click   Dell  Printers .
3 .  Click   Dell  V505 .
4 .  Click   Wireless Setup Utility .
In Windows XP and  Windows 2000: 1.  Click   Start ® Programs  or All Programs ® Dell  Printers ® Dell  V505 .
2 .  Click   Wireless Setup Utility .
The  Wireless  Setup  Utility  steps you through the configuration process.  The  wizard  can  automatically detect wireless  network
settings or allow you to  manually enter the network configuration settings.
Before...

Configuring the Printer on a Wireless Network Using Ad Hoc
Connection
By  default,  your  WPS -enabled  printer connects  to  a  wireless  network through infrastructure mode. To connect your  printer to
a  wireless  network through ad hoc  mode, you have  to  first create an ad hoc  profile on your  computer.
For  help creating an ad hoc  profile,  see the installed  Help,  or refer to  the manual that  came  with your  external  network
adapter  CD.
1.  Ensure  that  your  computer  is on,  and  then...

10. From the network list, select your  ad hoc  profile,  and  then  click   Next.
NOTE:  The  Wi -Fi  LED turns  blue, indicating  that  the printer has  successfully connected to  a  wireless  network.
11 . Remove the installation cable, and  then  click   Next.
12 . Follow the instructions on the installation screen to  complete  setup.
Configuring the Printer on a Wireless Network using Wi-Fi
Protected Setup
Wi -Fi  Protected  Setup  (WPS)  is available  only  if you are using  a  WPS -enabled...

7.  Wait  until the  Configure Wireless  screen appears.
8.  Using an Internet  browser, type in your  router IP  address and  press   Enter.
Your  routers web page  opens.  Navigate  to  the Wi -Fi  Protected  Setup  (WPS)  section.
NOTE:  You  may be prompted  to  enter your  username and  password.  If  you are not sure  of the username and
password,  contact  your  router manufacturer’s helpline or your  Internet  service  provider.
9 .  On  your  printer operator  panel,  use the left  or right...

14. Type  the PIN  provided  on your  printer operator  panel into the PIN  field on your  router WPS  page  within  two minutes.
Wait  for configuration to  complete.
If  setup  is successful
Wi- Fi Protected Setup  Successful  appears on the printer operator  panel.
Check if the printers Wi -Fi  LED turns  blue. For  more  information, see  Wi -Fi  LED
.  Continue with step 15.
If  setup  is unsuccessful  or times  out
Wait  for a  few  minutes, and  then  perform   step 9
 to   step  14 again.
15 ....

6.  From the  Select  Connection Type  screen, select Wireless Connection ,  and  then  click  Next.
7 .  Wait  until the  Configure Wireless  screen appears.
8 .  Using an Internet  browser, type in your  router IP  address,  and  press   Enter.
Your  routers web page  opens.  Navigate  to  the WPS  section.
NOTE:  You  may be prompted  to  enter your  username and  password.  If  you are not sure  of the username and
password,  contact  your  router manufacturer’s helpline or your  Internet  service...

14. Click   Push  Button  on your  router WPS  page  within  two minutes. Wait  for configuration to  complete.
If  setup  is successful
Wi- Fi Protected Setup  Successful  appears on the printer operator  panel.
Check if the printers Wi -Fi  LED turns  blue. For  more  information, see  Wi -Fi  LED
.  Continue with step 15.
If  setup  is unsuccessful  or times  out
Wait  for a  few  minutes, and  then  perform   step 9
 to   step  14 again.
15 . Close  the router WPS  page.
16 . Follow the instructions...

6.  From the  Select  Connection Type  screen, select Wireless Connection ,  and  then  click  Next.
7.  Wait  until the  Configure Wireless  screen appears.
8 .  On  your  printer operator  panel,  use the left  or right  arrow button 
  to  scroll to   Setup,  and  then  press  the
Select  button 
.
9 .  Use  the left  or right  arrow button 
  to  scroll to   Network Setup ,  and  then  press  the  Select button .
10 . Use  the left  or right  arrow button 
  to  scroll to   Wi- Fi Protected Setup ,...