DELL V505w User Manual

Setup Mode
*Factory default settings/Current settings  selected  by  user
Pass KeySpecify a  pass  key. Any external  Bluetooth-enabled  device needs to  enter this pass  key  before it  sends a
print  job.
NOTE: You  need  to  specify a  pass  key  if the Security Level  is set  to  High.
Clear  Device
List Removes the names of devices listed. Press  the 
Select button 
 to  clear  the Device  List.  A  confirmation
message  displays  before the list is cleared.
NOTE:  This submenu  is available  only...

To access  the Setup  mode menu:1.  From the main menu,  use the left  and  right   Arrow buttons 
  to  scroll to   SETUP,  and  then  press  the  Select
button 
.
2 .  Use  the left  and  right   Arrow buttons 
  until the heading you want  appears on the display, and  then  press  the
Select  button 
.
3 .  Use  the left  and  right   Arrow buttons 
  to  scroll to  the available  menu  items, and  then  press  the  Select button 
 to  save your  settings.
  Reset Network  Adapter  Defaults  
Setup...

Device  Setup Options
You  can  reconfigure  your  operator  panel settings by selecting  Device  Setup from  the Setup  menu.
Defaults Options
You  can  specify your  operator  panel default settings by selecting   Defaults from  the Setup  menu.
*Factory default setting/Current setting  selected  by  user
For  more  information, see  Defaults Options.
Network  SetupSpecify your  network settings.
Print Setup  Page
Wi -Fi  Protected  Setup
Wireless  Information
TCP/IP Menu
Network  Time
Active Network...

Network  Setup Options
You  can  configure your  network setup  options by selecting  Network Setup from  the Setup  menu.
Defaults Menu
From this  menu: You can:
Photo  Print Size Specify the size of your  photo.
Set  Defaults Specify which settings to  use for your  printer.
Use  Current
Use  Factory
Network  Setup Menu
From this  menu:You can:
Print Setup  Page Print a  list of wireless  network settings.
Wi -Fi  Protected  Setup Specify which type of configuration to  use for Wi -Fi  protection.
Push...

Maintenance Mode
To view  or change  the Maintenance Mode  menu  settings:1.  From the main menu,  use the left  and  right   Arrow buttons 
  to  scroll to   MAINTENANCE .
2 .  Press  the  Select button 
.
3 .  Use  the left  and  right   Arrow buttons 
  until the heading you want  appears on the display, and  then  press  the
Select  button 
.
Wireless Information Menu
From this  menu: You can:
Network  Name View the current SSID being used.
NOTE: You  cannot change  the value  of Network  Name....

From this
menu:You can:
Ink Levels Press  the Select button 
 to  view  the level of ink in both  cartridges.
Clean
Cartridges Press  the 
Select button 
 to  clean the ink cartridges. A  cleaning page  prints. You  may discard  the page
when  printing is complete.
Align
Cartridges Press  the 
Select 
 button to  align the ink cartridges. An alignment  page  prints. You  may discard  the
page  when  printing is complete.
Print Test
Page Press  the 
Select 
 button to  print  a  test page. You  may...

Peer-to-Peer Networking
  Sharing the Printer  on the Network
  Adding the Shared Printer  on Other  Network  Computers
Even without  the Dell™ Internal Wireless  Adapter  1150, your  printer can  still be shared with other users  on the network.
Connect the printer directly to  a  computer  (the host computer) using  the USB  cable, and  enable it  to  be shared across  the
network through peer-to -peer sharing. Sharing the printer using  your  computer  may slow down  the speed of your  computer.
To...

To share  the printer with other computers on the network,  perform  the following steps on the client  computers:
In Windows Vista:1.  Click  
® Control  Panel .
2 .  Click   Hardware  and Sound .
3 .  Click   Printers .
4 .  Click   Add  a  printer .
5 .  Click   Add  a  network,  wireless  or  Bluetooth printer .
6 .  To manually connect to  the shared printer, click   The printer I want isn’t  listed.
7 .  From the  Find a  printer by  name  or  TCP/IP  address  dialog  box,  click  Select  a  shared...

Loading Paper and Originals
  Loading  Paper
  Understanding the Automatic Paper  Type  Sensor
  Loading  Original Documents
Loading Paper
1.  Fan the paper.
2 .  Center  the paper on the paper support.
3 .  Adjust  the paper guides  so they rest  against the edges of the paper.
NOTE:  Do not pull on both  paper guides  simultaneously. When  one  paper guide is moved,  the other adjusts
accordingly.
NOTE:  Do not force  paper into the printer. The  paper should be flat against the paper support surface,...

100 sheets  of heavyweight
matte paperThe  print  side  of the paper faces  up.
The  paper guides  rest  against the edges of the paper.
You  select Automatic , Normal ,  or Photo  print  quality.
20  sheets  of banner  paper
You  remove all paper from  the paper support before inserting banner  paper.
You  use banner  paper designed for inkjet printers.
You  place  a  stack of banner  paper on or behind the printer, and  feed in the first sheet.
The  paper guides  rest  against the edges of the paper....