Digital Projection Projector M-Vision 930 3D Series User Manual

							4INSTALLATION AND QUICK-START GUIDE
4CONNECTION GUIDE
4OPERATING GUIDE
4REFERENCE GUIDE 
Rev C Februar y 2015 
M-Vision 930 3D Series
High Brightness Digital Video Projector 
115-072C  
						

							page i
About This Document
Follow the instructions in this manual carefully to ensure safe and long\
-lasting use of the projector.
Symbols used in this manual
Many pages in this document have a dedicated area for notes. The information in that area is accompanied by the following symbols:
 WARNING: this symbol indicates that there is a danger of physical injury \
to yourself and/or damage to the equipment unless 
the instructions are closely followed.
  ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock\
 unless the instructions are closely 
followed.
  NOTE: this symbol indicates that there is some important information tha\
t you should read.
Product revision
Because we at Digital Projection continually strive to improve our products, we may change specifications and designs, and add new features 
without prior notice.
Legal notice
Trademarks and trade names mentioned in this document remain the property\
 of their respective owners. Digital Projection disclaims any proprietary interest in trademarks and \
trade names other than its own.
Copyright © 2015 Digital Projection Ltd. All rights reserved.
Notes
    
Digital Projection M-Vision 930 Series
Rev C Februar y 2015  
						

							page ii
Introduction
Congratulations on your purchase of this Digital Projection product.
Your projector has the following key features:
• Support for most 3D formats.
• HDBaseT® for transmission of uncompressed High Definition Video up to 100 m from the source.
• Edge Blend.
• Blanking control for custom input window sizing.
• Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
• Control via LAN and RS232.
• Motorised lens mount.
A serial number is located on the product label. Record it here:
Notes
    
Digital Projection M-Vision 930 Series
Rev C Februar y 2015  
						

							page iii
CONTENTS
INSTALLATION AND QUICK-START GUIDE ..............................1
WHAT’S IN THE BOX? ...................................................................3
CONNECTING THE POWER SUPPLY .............................................4
PROJECTOR OVERVIEW ...............................................................5
Front and rear views .............................................................................5
Control panel indicators ........................................................................6
REMOTE CONTROL .......................................................................7
Infrared reception ..................................................................................9
Remote control troubleshooting ..........................................................10
POSITIONING THE SCREEN AND PROJECTOR ...........................11
CHANGING THE LENS .................................................................12
Inserting a new lens ............................................................................12
Removing the lens ..............................................................................13
CHANGING THE FILTERS ............................................................14
CHANGING THE LAMPS ..............................................................16
OPERATING THE PROJECTOR ....................................................18
Switching the projector on ...................................................................18
Switching the projector off ...................................................................18
Selecting an input signal or test pattern ..............................................19
Input signal ........................................................................................19
Test pattern ........................................................................................19
Adjusting the lens ................................................................................20
Adjusting the image.............................................................................21
Orientation  .........................................................................................21
Keystone  ...........................................................................................21
Picture ..............................................................................................21
CONNECTION GUIDE  ........................................................................\
....23
SIGNAL INPUTS ........................................................................\
..25
Digital inputs and outputs ....................................................................25
Analog inputs  ......................................................................................26
EDID on the DVI and VGA inputs........................................................27
Using HDMI/DVI switchers with the projector .....................................27
3D connections ...................................................................................28
3D sources up to 60Hz requiring frame doubling and left/right interleavi\
ng ..........28
Frame sequential 3D sources up to 120Hz .................................................28
Dual Pipe 3D ......................................................................................28
3D Sync...............................................................................................29
3D Sync in  .........................................................................................29
3D Sync out  .......................................................................................29
CONTROL CONNECTIONS ...........................................................30
LAN connection examples ..................................................................31
RS232 connection example ................................................................32
    
Digital Projection M-Vision 930 Series
Rev C Februar y 2015  
						

							page iv
OPERATING GUIDE ........................................................................\
........33
USING THE MENUS .....................................................................35
Opening the OSD ................................................................................35
Opening a menu..................................................................................35
Exiting menus and closing the OSD....................................................35
Inside a menu......................................................................................36
Accessing sub-menus ...........................................................................36
Executing commands............................................................................36
Editing projector settings .....................................................................37
Choosing a value from a list  ...................................................................37
Changing the value without viewing the list .................................................37
Using a slider to set a value ....................................................................37
USING THE PROJECTOR .............................................................38
Main menu ..........................................................................................38
Lens menu ..........................................................................................39
Lens Control .......................................................................................39
Lens Center .......................................................................................39
Image menu ........................................................................................40
Picture Mode ......................................................................................40
Brightness and Contrast  ........................................................................40
Gamma .............................................................................................41
Dynamic Black ....................................................................................41
Adaptive Contrast ................................................................................41
Saturation, Hue, Sharpness and Noise Reduction ........................................41
Position and Phase ..............................................................................42
Resync .............................................................................................42
Color menu..........................................................................................43
Color Space .......................................................................................43
Color Temperature ...............................................................................44
Gamut ..............................................................................................45
RGB Lift and Gain ................................................................................45
Geometry menu  ..................................................................................46
Aspect Ratio .......................................................................................46
Overscan ...........................................................................................47
Keystone ...........................................................................................48
Rotation  ............................................................................................50
Pincushion / Barrel ...............................................................................51
Corners .............................................................................................52
Reset................................................................................................53
Blanking  ............................................................................................54
Edge Blend menu................................................................................55
Blend Width........................................................................................56
Black Level Uplift .................................................................................57
Possible Geometry and Edge Blend combinations .............................58
3D menu..............................................................................................59
3D types ............................................................................................60
Some 3D settings explained ...................................................................61
Frame rate multiplication in 3D images ......................................................62
Lamps menu .......................................................................................63
Setup menu .........................................................................................64
Network ............................................................................................65
On Screen Display  ...............................................................................66
Presets .............................................................................................67
CONTENTS (continued)
    
Digital Projection M-Vision 930 Series
Rev C Februar y 2015  
						

							page v
Information menu ................................................................................68
Factory Reset .....................................................................................68
REFERENCE GUIDE ........................................................................\
........69
THE DMD™ ........................................................................\
..........72
CHOOSING A LENS .....................................................................74
Basic calculation  .................................................................................75
Basic calculation example ...................................................................76
Full lens calculation  .............................................................................77
Introducing TRC ..................................................................................77
Calculating TRC ..................................................................................78
Calculating the throw ratio with TRC .........................................................79
Full lens calculation example ..............................................................80
SCREEN REQUIREMENTS  ...........................................................81
Fitting the image to the DMD™ ...........................................................81
WUXGA images displayed full width  .........................................................81
WUXGA images displayed with a height of 1080 pixels ..................................82
WUXGA images displayed full height ........................................................83
Diagonal screen sizes .........................................................................84
Fitting the image to the screen  ............................................................85
Positioning the screen and projector ...................................................86
POSITIONING THE IMAGE  ...........................................................87
Maximum offset range .........................................................................89
ASPECT RATIOS EXPLAINED ......................................................90
Aspect ratio examples  .........................................................................91
FRAME RATES AND PULLDOWNS EXPLAINED ...........................93
Interlaced and progressive scan .........................................................93
Frame rates of image sources  ............................................................93
Pulldowns - conversion into destination formats .................................94
2:3 (normal) pulldown ...........................................................................94
2:3:3:2 (advanced) pulldown ...................................................................95
APPENDIX A: LENS PART NUMBERS ..........................................96
APPENDIX B: LENS CHARTS ......................................................97
How to use the lens charts .....................................................................97
TRC values applied in the charts .............................................................98
Full DMD™ width images .......................................................................99
1.25:1 images ...................................................................................100
1.33:1 images ...................................................................................101
APPENDIX C: SUPPORTED SIGNAL INPUT MODES ..................102
2D input modes .................................................................................102
3D input modes .................................................................................104
APPENDIX D: MENU MAP ..........................................................105
CONTENTS (continued)
    
Digital Projection M-Vision 930 Series
Rev C Februar y 2015  
						

							page vi
APPENDIX E: WIRING DETAILS ..................................................111
Signal inputs and outputs ...................................................................111
VGA  ................................................................................................111
HDMI 1 and 2  ...................................................................................11 2
DVI ................................................................................................11 3
Component 2 ....................................................................................11 4
Control connections  ..........................................................................11 5
LAN ...............................................................................................11 5
RS232 ............................................................................................11 5
Trigger 1 & Trigger 2 ...........................................................................11 6
IR input ...........................................................................................11 6
3.5 mm mini jack ...............................................................................11 6
USB ...............................................................................................11 6
3D Sync IN and 3D Sync OUT ..............................................................11 6
APPENDIX F: GLOSSARY OF TERMS .........................................11 7
TECHNICAL SPECIFICATIONS ..................................................128
Models...............................................................................................128
Inputs and outputs.............................................................................129
Bandwidth  .........................................................................................129
Remote control and keypad ..............................................................129
Automation control ............................................................................129
Color temperature .............................................................................129
Lenses...............................................................................................130
Lens mount  .......................................................................................130
Mechanical mounting ........................................................................130
Orientation.........................................................................................130
Electrical and physical specifications ................................................131
Safety & EMC regulations .................................................................131
CONTENTS (continued)
    
Digital Projection M-Vision 930 Series
Rev C Februar y 2015  
						

							 
   
Digital Projection M-Vision 930 Series 
This page is intentionally left blank.  
						

							INSTALLATION AND QUICK-START GUIDE4 
Rev C Februar y 2015 
M-Vision 930 Series
High Brightness Digital Video Projector  
						

							Installation and Quick-Start Guide
IN THIS GUIDE
IN THIS GUIDE
What’s In The Box? ........................................................................\
.....................3
Connecting The Power Supply ........................................................................\
4
Projector Over view ........................................................................\
.....................5
Front and rear views ...................................................................................................5
Control panel indicators .............................................................................................6
Remote Control ........................................................................\
............................7
Infrared reception ........................................................................................................9
Remote control troubleshooting  .............................................................................10
Positioning The Screen And Projector .......................................................11
Changing The Lens ........................................................................\
...................12
Inserting a new lens ..................................................................................................12
Removing the lens ....................................................................................................13
Changing The Filters ........................................................................\
................14
Changing The Lamps  ........................................................................\
...............16
Operating The Projector ........................................................................\
.........18
Switching the projector on .......................................................................................18
Switching the projector off .......................................................................................18
Selecting an input signal or test pattern .................................................................19
Input signal .....................................................................................................\
.................19
Test pattern .....................................................................................................\
................19
Adjusting the lens .....................................................................................................20
Adjusting the image  ..................................................................................................21
Orientation  ....................................................................................................\
..................21
Keystone .....................................................................................................\
....................21
Picture .....................................................................................................\
........................21
   
Digital Projection M-Vision 930 Series 
Rev C Februar y 2015