Home > DJI > Camera > DJI Spark User Manual

DJI Spark User Manual

Here you can view all the pages of manual DJI Spark User Manual. The DJI manuals for Camera are available online for free. You can easily download all the documents as PDF.

Page 31

© 2017 DJI All Rights Reserved.  31
Camera
Profile
The  onboard  camera  uses  its  1/2.3  inch  CMOS  sensor  to  capture  video  up  to  1080p  at  30  fps  and  12 
megapixel  stills.  You  can  record  video  in  either  MOV  or  MP4  formats.  Available  picture  shooting  modes 
include Single Shot, Burst, Interval, Panorama, and ShallowFocus. A live\
 preview of what the camera sees 
can be monitored on a connected mobile device via the DJI GO 4 app.
Camera Micro SD Card Slot
To store your photos...

Page 32

32 © 2017 DJI All Rights Reserved. 
61% 1209:292.4GIn flight (GPS)P-GPS
 The  Wi-Fi  frequency  of  your  mobile  device  can  be  set  to  2.4  GHz  (default)  or  5.8  GHz.  On 
supported devices, set Wi-Fi to 5.8 GHz for less interference. Press and hold the power button for nine seconds or more until you hear three beeps to reset 
the  Wi-Fi  name  and  password,  and  reset  the  Wi-Fi  frequency  to  2.4  GHz.  Or  tap  “Help”  in  the 
DJI GO 4 app, then follow the instructions.  Only  fly  with...

Page 33

© 2017 DJI All Rights Reserved.  33
The Stick Mode is set to Mode 2 by default. 
Stick Neutral/Mid-Point: Control sticks are centered.
Moving the Control Stick: Control sticks are pushed away from the center\
.
Right StickLeft Stick
Turn Right
Turn Left Up
DownRight
Left
Up
Down
Turn Right
Turn LeftRight
Left
Forward
BackwardLeft Stick Right Stick
Forward
Backward
Right StickUp
DownForward
BackwardLeft Stick
Turn Right
Turn Left Right
Left
Controlling the Aircraft
This section explains how to control the...

Page 34

34 © 2017 DJI All Rights Reserved. 
Virtual Joysticks /Remote Controller(Mode 2)
Aircraft (  Indicates Nose Direction)Remarks 
Moving the left stick up and down changes the 
aircraft’s elevation.
Push the stick up to ascend and down to 
descend. 
When both sticks are centered, the Spark will 
hover in place.
The more the stick is pushed away from the 
center position, the faster the Spark will change 
elevation. Always push the stick gently to prevent 
sudden and unexpected elevation changes.
Moving the...

Page 35

© 2017 DJI All Rights Reserved.  35
Remote Controller 
(Optional)
This section describes the features 
of the remote controller and includes 
instructions for controlling the aircraft 
and the camera. 

Page 36

36 © 2017 DJI All Rights Reserved. 
Remote Controller (Optional)
Remote Controller Profile
Spark’s  remote  controller  features  a  brand  new,  amplified  Wi-Fi  signal  transmission  system,  capable  of 
controlling  the  aircraft  and  the  gimbal  camera  at  a  maximum  transmission  range  of  1.2  mi  (2  km)*.  The 
remote controller can connect to a mobile device wirelessly and display \
a live video feed via the DJI GO 
4 app. The folding clamps allow you to secure your mobile device. Maximum...

Page 37

© 2017 DJI All Rights Reserved.  37
Charging the Battery
Connect the power port on the remote controller to the USB charger to ch\
arge the battery. It takes 
approximately two hours to fully charge the remote controller.
Using the Remote Controller
The remote controller is powered by a rechargeable battery that has a ca\
pacity of 2970 mAh.
Turning the Remote Controller On and Off
Press the Power button once to check the current battery level. Press on\
ce, then again and hold to turn 
on/off the remote...

Page 38

38 © 2017 DJI All Rights Reserved. 
Flight Mode Switch
Toggle the switch to select the desired flight mode. 
Choose between P Mode and S Mode.
PositionFlight Mode
SPORTP Mode
SPORTS Mode 
RTH Button
Press and hold the RTH button to start the Return to Home (RTH) procedure. The aircraft will then return 
to the last recorded Home Point. Press this button again to cancel the R\
TH procedure and regain control 
of the aircraft. 
Optimal Transmission Range
The transmission signal between the aircraft and the...

Page 39

© 2017 DJI All Rights Reserved.  39
4. Then the front LEDs turn solid red after blinking green. When the status\
 LED on the remote controller 
turns solid green, linking is complete.
Ensure the remote controller is within 0.66 ft (20 cm) of the aircraft during linking.
Disconnect the Remote Controller 
Apart from using the remote controller, you can control the aircraft usi\
ng virtual joysticks in DJI GO 4. 
However, when the remote controller is linked to the aircraft, virtual joystick control is...

Page 40

40 © 2017 DJI All Rights Reserved. 
DJI GO 4 App 
This section introduces the main 
functions of the DJI GO 4 app. 
Start reading DJI Spark User Manual
All DJI manuals