DJI Spark User Manual

© 2017 DJI All Rights Reserved.  41
DJI GO 4 App
Use this app to control the gimbal, camera, and other aircraft functions\
. The app features Equipment, 
Editor,  SkyPixel  and  Me  sections,  which  are  used  for  configuring  your  aircraft,  editing  and  sharing  your 
photos and videos with others.
Equipment
Enter Camera View by tapping the “GO FLY” icon on the Equipment page when your mobile device 
is connected to the aircraft.
Camera View
S 1.1
D  9 .6
H  9 .6
61% P-GPS1209:29
1080P/30
2.4GIn...

42 © 2017 DJI All Rights Reserved. 
5. Camera Parameters
1080P/30
Displays camera settings parameters and capacity of the Micro SD card.
6. GPS Signal Strength
 : Shows the current GPS signal strength. White bars indicate adequate G\
PS strength.
7. 3D Sensing System Status
 : Tap this icon to enable or disable features provided by the 3D Sensin\
g System.
8. Wi-Fi Settings
 2.4G : Tap to enter the Wi-Fi settings menu.
9. Battery Level
61% : This icon shows the current battery level.Tap to view the...

© 2017 DJI All Rights Reserved.  43
16. Playback
 :  Tap to enter the Playback page and preview photos and videos as soon\
 as they are captured.
17. Flight Telemetry
H 9.6M: Height from the ground.
D 9.6M: Distance between the aircraft and the Home Point.
S 1.1M/S : Aircraft speed.
18. Virtual Joystick Switch
  :  Tap  to  enable/disable  virtual  joysticks.  Put  your  fingers  on  the  screen  to  use  virtual  joysticks to  control  the  aircraft  after  enabling  this  switch.  You  can  touch  the...

44 © 2017 DJI All Rights Reserved. 
Editor
An intelligent video editor is built into the DJI GO 4 app. After record\
ing several video clips and 
downloading  them  to  your  mobile  device,  go  to  Editor  on  the  home  screen.  You  can  then  select  a 
template and a specified number of clips which are automatically combined to create a short film that can 
be shared immediately.
SkyPixel 
View and share the photos and videos in the SkyPixel page.
Me
If you already have a DJI account, you will be...

© 2017 DJI All Rights Reserved.  45
Flight
This section describes safe flight 
practices and flight restrictions. 

46 © 2017 DJI All Rights Reserved. 
Flight
Once  pre-flight  preparation  is  complete,  it  is  recommended  that  you  use  the  flight  simulator  in  the 
DJI  GO  4  app  to  hone  your  flight  skills  and  practice  flying  safely.  Ensure  that  all  flights  are  carried 
out in an open area.
Flight Environment Requirements
1. Do not use the aircraft in severe weather conditions. These include wind\
 speeds exceeding 10 m/s, 
snow, rain and fog.
2.  Fly in open areas. Tall structures and large...

© 2017 DJI All Rights Reserved.  47
GPS Signal Weak   Blinking Yellow
Flight LimitsDJI GO 4 AppAircraft Status Indicator 
Maximum 
Flight 
Altitude
Height is restricted to 16 feet (5 
meters) when the GPS signal 
is weak and Vision System is 
activated. Height is restricted to 
98 feet (30 meters) when the GPS 
signal is weak and Vision System is 
inactivated.
Warning: Height limit 
reached.None.
Max RadiusNo limits
 If the aircraft flies out of the limit, you can still control the aircraft, but you...

48 © 2017 DJI All Rights Reserved. 
Auto Takeoff and Auto Landing
Auto Takeoff
Use auto takeoff only if the Aircraft Status Indicators are blinking gre\
en. Follow the steps below to use the 
auto takeoff feature:
1. Launch the DJI GO 4 app, and tap “GO FLY” to enter camera page.
2. Complete all steps on the pre-flight checklist.
3. Tap “  ”, and confirm that conditions are safe for flight. Slide the icon to confirm and takeoff.
4. Aircraft takes off and hovers at 1.2 meters above ground.
Aircraft...

© 2017 DJI All Rights Reserved.  49
  To  perform  the  CSC  midair  in  case  of  an  emergency,  hold  for  1.5  seconds  to  stop  the  motors  mid-
flight. Stopping the motors mid-flight will cause the aircraft to crash.
Flight Test 
Takeoff/Landing Procedures
1. Place the aircraft in an open, flat area with the battery level indicators facing towards you.
2. Turn on the Intelligent Flight Battery.
3. Launch the DJI GO 4 app and enter the camera page.
4. Wait until the Aircraft Indicators blink...

50 © 2017 DJI All Rights Reserved. 
3. Hold the aircraft vertically, with the nose pointing downward, and rotate it 360 degrees around the 
center axis.
Calibration Procedures
Choose an open area to carry out the following procedures. 
1. Tap the Aircraft Status Bar in the app and select “Calibrate”, then follow the on-screen instructions.
2. Hold the aircraft horizontally and rotate 360 degrees. The Aircraft Status Indicators will go solid green.
4. Re-calibrate the aircraft if the aircraft status...