Dukane Imagepro 8043/8753 Lcd Projector Users Guide

3
FIGURE 1
Shipping box contents
1. Projector + lens cap 6. Computer cable
2. Soft carry case 7. PS/2 mouse cable
3. User’s Guide, Quick Start 
card, and CD8. USB mouse cable
4. Remote control 9. S-Video cable
5. Power cord* 10. Audio/Video cable
*additional country-dependant power cords may be included
1
2
3 4
5*
6
79
8
10 

4
Introduction
F
IGURE 2
Front view of projector
F
IGURE 3
Rear view of projector 
keypad
zoom ring
focus ring
foot release IR sensor
connectors
security lock power
cord
connector foot releasedust filters
adjustable foot
lamp doorIR sensor 

5
Usage Guidelines
 Do not look directly into the projection lens when the projector  
is turned on. The bright light may harm your eyes.
 Do not block the grills on the projector. Restricting the air flow 
can cause it to overheat and turn off. If this happens, you must 
wait a minute before attempting to turn it back on.
  Handle the projector as you would any product with glass 
components. Be especially careful not to drop it.
  Avoid leaving the projector in direct sunlight or extreme cold 
for...

6
Introduction
Warranty 
This  p ro d uct  i s  b ack ed  by a  l i m ited  Five -year  warra nty .  T he 
det ails  of t h e w arr an ty  are  prin ted  at  th e b ack  of t h is  manu al. 
W hen  s e n d in g  your p ro ject or in  f o r  re p air,  Dukane  r e co m m en ds  
shipping the unit in its original packing material, or having a pro- 
fessional packaging company pack the unit for shipping. Do not  
ship your projector in the enclosed soft case. Please insure your 
shipment for its full value. 

7
SETTING UP THE PROJECTOR1 Place the projector on a flat surface.
The projector must be within 6 feet (1.8 m) of your power  
source and your computer.
If you want to project from behind a translucent screen, set  
up the projector behind your screen. See “Rear” on page 25  
to reverse the image.
If you are installing the projector on the ceiling, refer to the 
installation guide that comes with the Ceiling Mount Kit for 
more information. To turn the image upside down, see  
“Ce
ili n g”  o n  p age...

8
Setting up the Projector
NOTE: Before you continue,
make sure the projector and all
other equipment is turned off. If
you’re connecting a computer,
make sure the distance between it
and the projector is 6 feet or less.
F
IGURE 5
Connector panel
NOTE: If you are connecting an
older Macintosh computer that
does not have a 15-pin connector,
you must use a Mac adaptor
between the computer and the
projector. See “Optional
Accessories” on page 41.
computerUSB mouse
PS/2 mouse computer S-videovideoaudio in...

9
Connecting a Computer
NOTE: Many laptop computers 
do not automatically turn on their 
external video port when a sec-
ondary display device such as a 
projector is connected. Refer to 
your computer manual for the 
command that activates the exter-
nal video port. Activation com-
mands for some laptop computers 
are listed in the Appendix of this 
manual on page 42 and in the 
Service section of our website.
1Plug one end of the computer cable into the blue “Computer 
VGA”
 connector on the...

10
Setting up the Projector
Do you want to control the computer’s mouse from the projector’s 
remote?
If your computer has a PS/2 connector, use the PS/2 mouse cable.
1Plug the green end of the PS/2 mouse cable into the mouse 
connector on your computer. 
2Plug the black end of the PS/2 mouse cable into the 
“PS2/RS-232” connector on the projector.
If your computer has a USB connector and is running Windows 98, 
use the USB mouse cable.
NOTE: The USB mouse is
supported for use with
Windows 98 or higher...

11
Connecting a Video Player
If your video device (VCR, DVD player, video camera) uses a 
round, one-prong composite video connector, use the composite 
audio/video (A/V) cable provided. The end with 2 connectors 
attaches to the projector, the other end attaches to the video 
device.
If your video device uses a round, four-prong S-video con-
nector, use an S-video cable. S-video generates a higher 
quality image.
1Plug the A/V cable’s round yellow connector into the “video-
out” connector on your video...

12
Setting up the Projector
3Plug the A/V cable’s white connector into the left “audio out” 
connector on your video device. Plug the cable’s red connec-
tor into the right “audio out” connector on the video device.
4Plug the blue end of the A/V cable into the “Audio in” con-
nector on the projector.
CAUTION: Your video player
may also have a “Video Out”
connector for a coaxial cable
connection. DO NOT use this to
connect to the projector.
The projector is compatible with these major broadcast video...