Dukane Imagepro 8043/8753 Lcd Projector Users Guide

43
Bondwell LCD or CRT options after 
bootupreboot for LCD or CRT 
options to appear
Chaplet** setup screen setup screen
FN-F6 FN-F6
FN-F4 FN-F4
Chembook FN-F6 FN-F6
Commax Ctrl-Alt-#6 Ctrl-Alt-#5
Compaq* ** Ctrl-Alt-< Ctrl-Alt->
FN-F4 FN-F4
automatic automatic
mode/? (for setup option) mode/? (for setup option)
Compuadd* ** automatic automatic
Alt-F for screen setup 
optionAlt-F for screen setup 
option
Data General Ctrl-Alt-Command Ctrl-Alt-Command
Data General 
Wa l k a b o u t2 CRT/X at DOS prompt...

44
Appendix
Gateway FN-F3
FN-F1/FN-F1 again simul-
taneousFN-F3
FN-F1
Grid* ** FN-F2, choose auto or 
simultaneousFN-F2
Ctrl-Alt-Tab Ctrl-Alt-Tab
Hitachi FN-F7 FN-F7
Honeywell FN-F10 FN-F10
Hyundai setup screen option setup screen option
IBM 970* automatic warm reboot
IBM ThinkPad** reboot, enter setup menu FN-F2
FN-F7, select choice from 
setup menu
FN-F1, select choice
FN-F5, select choice
PS/2 SC select choice 
(CRT, LCD, etc.)
Infotel FN-F12 FN-F12
Kaypro boot up, monitor plugged 
inunplug monitor...

45
Micro Express* automatic warm reboot
Micron FN-F2 FN-F2
Microslate* automatic warm reboot
Mitsubishi SW2 On-Off-Off-Off SW2 Off-On-On-On
NCR setup screen option setup screen option
NEC* ** setup screen option setup screen option
CRT at the DOS prompt LCD at the DOS prompt
FN-F3 FN-F3
Olivetti* automatic automatic
FN-O/* FN-O/*
Packard Bell* ** FN-F0 FN-F0
Ctrl-Alt-< Ctrl-Alt->
Panasonic FN-F2 FN-F2
Prostar Ctrl-Alt-S at bootup Ctrl-Alt-S at bootup
Samsung* setup screen option setup screen option
Sanyo...

46
Appendix
* These manufacturers have models that automatically send video 
to the external CRT port when some type of display device is 
attached.
** These manufacturers offer more than one key command depend-
ing on the computer model. Wyse software driven software driven
Zenith** FN-F10 FN-F10
FN-F2 FN-F2
FN-F1 FN-F1
Zeos** Ctrl-Shift-D
FN-F1Ctrl-Shift-D
FN-F1 ComputerKey command to 
activate portKey command to
de-activate port 

47
Using Video Mirroring with a PowerBook Computer
When you turn video mirroring (called SimulScan in newer Pow-
erBooks—see below) on, the projector displays the same informa-
tion that appears on your PowerBook’s built-in screen. When 
video mirroring is off, the projector acts like a separate display.
To turn on video mirroring for the first time:
1Open the Monitors control panel; click on Monitor 2.
2Set the number of colors you want.
3Open the Control Strip, then click on the monitor icon.
4Select...

48
Appendix
Projected Image Size
NOTE: Use the graph and table
to help you determine projected
image sizes.
F
IGURE 27
Projected image size
50
100 
150
200
250
5100 15
20 25 30
Diagonal Image Size (inches)
Distance to Screen (feet)
maximum image size
minimum image size
Ta b l e  1 :  
Range of distance to the screen for a given screen size
Diagonal 
Screen Size  (inches)  Distance to screen
Image Width (inches) Maximum 
distance (feet) Minimum 
Distance (feet)
40 32 5.1 3.9 
50 40 6.4 4.9
60 48 7.7 5.9...

49
INDEX
Numerics
16 by 9 format 26
A
accessories, ordering 40, 41
activation commands for laptop com-
puters 42
adjusting
brightness 22
color 22
contrast 22
height of projector 15
image position 24
image width 24
keystone 23
adjusting the image 24
altitude limits 39
assistance. See Technical Support
B
Basic menu 22
brightness, adjusting 22
C
cables
audio 9
computer cable 3
mouse 10
ordering 40
power 40
video 11
cases, ordering 40
Ceiling mounted projection 25
cleaning the projection lens 29
Color...

50
IndexF
Factory reset 27 
focusing the image 15
Freeze 26
H
Hide OSD 25
I
IBM-compatible computerscompatibility 2
connecting 9
image
adjusting 13, 15
colors don’t match computer’s 36
focusing 15
freezing 26
has lines or spots 36
not centered 35
not displayed 34
out of focus 36
quality 35–36
resolution 1
reversed 36
size 7, 48
too wide or too narrow 36
zooming 15
K
keypad 18
keystone adjustment 19, 23
L
lampordering 40, 41
replacing 31
turns off unexpectedly 36
lamp hour timer 27
Language menu 26
laptop...

51
P
Picture menu 24 
Plug and Play 25
PNP Enable 25
position, adjusting 24
power cordconnecting 13
ordering 40
power saving mode 25
power up sequence 13, 35
PS/2 mouse 10
R
Rear projection 25
remote control replacing the batteries 32
using 17, 18
replacing projection lamp module 31
Reset 23
resetting the lamp timer 27
resetting the projector 23, 27
resolution 1
S
safety guidelines iii
Screen aspect 24
security lock 33, 41
Service menu 27
Setup menu 23
Sharpness 24
shutting off the projector 14...

52
Index