Eiki Eip-1000t Dlp Projector Owners Manual
Here you can view all the pages of manual Eiki Eip-1000t Dlp Projector Owners Manual. The Eiki manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
38 “Projection adjustment (PRJ-ADJ)” menu Picture Auto SearchSCR - ADJPRJ - ADJHelp Auto Sync Auto Power Off System Sound h Off On On Off SEL./ADJ. ENTER END0 Lamp Timer(Life) 100% Speaker OnRS-232C 9600 bpsFan Mode Normal Picture There is no picture or audioSCR - ADJ PRJ - ADJHelp Vertical stripes or flickering image appear Data image is not centered Color is faded or poor Picture is dark The image is distorted Reset all adjustments to default settings SEL. ENTER END Main menu Sub menuPRJ - ADJPage...
Page 42
39 Using the Menu Screen Menu Selections (Adjustments) Example: Adjusting “Bright”.• This operation can also be performed by using the buttons on the projector. Press BMENU.• The “Picture” menu screen for the se- lected input mode is displayed. Adjustment buttons (P/R/O/Q) Example: “Picture” screen menu for INPUT 1 (Component) mode Press Q or O and select “Picture” to adjust. 1 2 ENTER button RETURN button Menu item Picture Picture Mode Contrast 0 0 0 0 K 7500SCR - ADJ PRJ - ADJ Help BrightColorTint0...
Page 43
40 Using the Menu Screen (Continued) Press P or R and select “Bright” to adjust. • The selected item is highlighted. • Press hENTER again to return to the previous screen. Press O or Q to adjust the item selected. • The adjustment is stored. Press BMENU/HELP.• The menu screen will disappear. 3 4 5 0 Bright Picture SEL./ADJ. Rtn. Menu END Picture Picture Mode Contrast 0 0 0K 7500SCR - ADJ PRJ - ADJ Help ColorTint0 Sharp 1CLR TempBright Boost Progressive 3D Progressive Standard Reset SEL./ADJ. ENTER...
Page 44
41 Picture Adjustment (“Picture” menu) Selectable items Standard Natural Dynamic Movie1 Movie2 Q Example: “Picture” screen menu for INPUT 1 (RGB) mode Q Example: “Picture” screen menu for INPUT 3 mode Picture Picture Mode Contrast 0 0 0 0 K 7500SCR - ADJ PRJ - ADJ Help BrightColorTint0 Sharp 1CLR TempBright Boost Progressive 3D Progressive Standard Reset SEL./ADJ. ENTER END Lamp Setting Bright 1 2 3 2 4 5 Description For standard image A balanced color image is obtained. A vivid image is obtained. Gives...
Page 45
42 4 44 4 4 Progressive • In NTSC or PAL60Hz, even if the 3D Progres- sive mode has been set, the three-two pull down enhancement will be enabled automati- cally when the film source has been entered. • When the image is blurred or noisy, switch to the optimal mode. • When using progressive inputs, inputs are di- rectly displayed so that 2D Progressive, 3D Progressive and Film Mode cannot be se- lected. * The film source is a digital video recording with the original encoded as is at 24 frames/second....
Page 46
43 Adjusting the Projected Image (“SCR - ADJ” menu) Picture Resize 0 SCR - ADJPRJ - ADJ Help Keystone OSD Display Background PRJ Mode LanguageFront English Logo On Stretch 654321 1 11 1 1 Setting the Resize Mode • For details of the Resize mode, see pages 34 and 35. • You can also press HRESIZE on the remote control to set the resize mode. (See page 34.) Note Menu operation n Page 39 2 22 2 2 Keystone Correction When the image is projected either from the top or from the bottom towards the screen at an...
Page 47
44 Adjusting the Projector Function (“PRJ - ADJ” menu) Picture Auto SearchSCR - ADJPRJ - ADJHelp Auto Sync Auto Power Off System Sound h Off On On Off SEL./ADJ. ENTER END0 Lamp Timer(Life) 100% Speaker OnRS-232C 9600 bpsFan Mode Normal 1 11 1 1 Auto Search Function This function automatically searches for and switches to the input mode in which signals are being received, when the projector is turned on, or when the INPUT button is pressed. When “Auto Search” is set to “On” • If two or more input signals...
Page 48
45 Menu operation n Page 39 • When the Auto Power Off function is set to “On”, 5 minutes before the projector enters standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes. Selectable items On OffDescription When no input signal is detected for more than 15 minutes, the projector will automatically enter standby mode. The Auto Power Off function will be disabled. Note 3 33 3 3Auto Power Off Function 5 55 5 5 Speaker Setting Selectable items...
Page 49
46 Troubleshooting with “Help” menu Utilizing “Help” menu functions This function advises you to solve the problems during usage. • You can adjust the items with check marks (✔). • The items in the “Help” menu change, de- pending on the input signal or setting that you have selected. •If the problem is not solved, refer to “Troubleshooting”. (see pages 55 and 56) Select “Component”, then press hENTER. • If there are more items to be set after this, follow the instructions on the screen and select the...
Page 50
47 Cleaning the lensUse a commercially available blower or lens cleaning paper (for glasses and camera lenses) for cleaning the lens. Do not use any liquid type cleaning agents, as they may wear off the coating film on the surface of the lens. As the surface of the lens can easily get damaged, be sure not to scrape or hit the lens. Cleaning the exhaust and intake ventsUse a vacuum cleaner to clean dust from the exhaust vent and the intake vent. Cleaning the projectorEnsure that you have unplugged the...