Eiki Eip-25 Multimedia Projector Owners Manual

							                        
10  
• Press this button, then press right and left button to execute 
keystone correction. 
• Press 
						

							                        
11
6.Operation guide 
 
6.1 Connecting components 
You can connect the projector to your computer, DVD player or VCR. To connect 
the projector to a DVD player or VCR, go to “Connecting to a DVD player or 
VCR” on page 12. 
 
 
 
 
 
1. VGA In/Out port 
2.  USB In port 
3.  S-Video In port 
4.  Composite Video port 
5.  PC Audio In/Out In port 
6.   DVI-D In port
  
						

							                        
12
6.2 How to connect the projector to your computer 
 
1)  Plug the VGA cable into the VGA port at the left side of projector, then plug 
the other end of VGA cable into the computer. 
 
Note: If you are connecting to a notebook, you may need to make adjustments to 
the notebook’s display settings first. Please refer to the user’s guide that 
came with your notebook.
 
 
2) If you want to use the remote control as a mouse, plug the USB cable into the 
USB port at the left side of projector, and then plug the other end into the 
computer. 
3) If your presentation contains an audio track, plug the PC Audio in/out cable into 
the Audio In port at the left side of projector then plug the other end into the 
computer. 
4) Turn on the projector first, then the computer.   
 
6.3 How to connect the projector to a DVD player or VCR 
 
If you are using composite video cable, please refer to the following 
description to complete the connection action. 
1) Plug the yellow, red, and white composite cable connectors separately into the 
same color port at the left side of projector.   
2) Then plug the yellow, red, and white connectors on the other end into the 
corresponding ports on the back of the DVD player or VCR. 
 
If you are using S-video cable, please refer to the following description to 
complete the connection action. 
1) Plug the S-Video cable connector into the S-Video port at the left side of 
projector, then plugs the other end into the DVD player or VCR. 
2) Plug the red and white connectors from a composite video cable into the 
corresponding ports at the left side of projector, then plug the other end of red 
and white connectors into the corresponding ports on the back of DVD player or 
VCR.
  
 
Note: When you are using the S-Video cable along with the A/V cable, make sure you 
do not plug in the A/V cable’s yellow connector
. 
 
 
  
						

							                        
13
After you have connected all components to the projector, you are 
ready to begin using the projector. 
 
6.4 Turning on the projector: 
1) Remove the lens cap. 
2) Ensure the cable connectors have connected properly. 
3) Plug the power cord, press the main switch on the top of power cord socket of 
the projector, Power LED blinks steadily and slowly. 
4) Press down the “Power” button on the remote control or panel to turn on the 
projector, the Power LED displays steady green. 
5) The projection screen displays “Warming up! Please wait! ”. Please wait for 
30sec; the projector will automatically detect the input source.   
6) If the screen displays “No signal”, ensure the source is turned on and the cables 
are properly connected. 
7) To have the best image performance, press “AUTO/ENTER” each time when 
you turn on the projector.
  
 
Note: After the projector is turned on, it will detect the interior temperature 
automatically. If it is overheated, Lamp LED will blink rapidly and the fan 
will carry out cooling action automatically after rotating 8 sec. At this time, 
“Power” will have no function.
 
 
 
 
 
 
 
6.5 Basic image adjustment 
 
1) Power up your equipment in right order and aim the projector at the screen.   
2) Please rotate the zoom ring to adjust the image size. 
3) Please rotate the focus ring to adjust the image focus. 
4) Please use the tilt foot to adjust the image height. 
5) Please use the panel or remote control to adjust the horizontal and vertical 
position of image or execute keystone correction.   
6) Please use the OSD menu to adjust the brightness, contrast and color of the 
screen.  
 
 
  
						

							                        
14
6.6  Turning off the projector  
1)  Press “Power” button to turn off the projector lamp. 
2)  When you press the “Power ” button, you will see the message stating “Press 
Power again to turn off the lamp!”. At this time, you only have to press 
“Power” button again to turn off the projector. Or else the message will 
disappear automatically after 5 sec. 
3)  After the lamp is turned off, LED indicator will blink rapidly. At this time, 
“Power” will have no function. To restart the projector, please wait 60 sec, 
when LED indicator blinks slowly and steadily, you can restart the projector. 
4)  After turning off the main switch on the top of power cord socket of the 
projector, then disconnect the power cable.   
 
Note: To extend the lamp life-span, please do not unplug the power cord 
immediately after the lamp is turned off. Please allow at least 120 sec for 
the fan to stop, and then you can unplug the power cord.
 
 
 
6.7 Adjusting the projected image height.  
  
To adjust the tilt angle of the projector 
 
To raise the projector 
1.  Press and hold the Adjustor-foot release button. 
2.  Raise the projector to the height you want, then release the button to lock the 
foot into position. 
Adjustor-foot release button
 
Adjustor-foot 
						

							                        
15 To lower the projector
 
1.  Press and hold the Adjustor-foot release button. 
2.  Lower the projector to the height you want, then release the button to lock the 
foot into position. 
 
6.8 Adjusting the image focus and zoom   
 
 
 
 
 
 
You can adjust the zoom ring to magnify or minify the image. Rotate 
counterclockwise to magnify the image. Rotate clockwise to minify the image. To 
adjust the focus, please rotate the focus ring to obtain the best focus. The focus 
distance of this projector is 1.4~12 meter. 
 
 
 
 
 
 
 
Zoom Wheel 
Focus ring 
						

							                        
16
7.OSD Menu 
Press “Menu” button to open the menu. Press up and down button to choose the 
OSD options or press Esc to exit. To enter the submenu, please press “Auto/Enter” 
button or right button. Under the submenu, press “Menu” or the Esc button on the 
remote control to return to Menu main screen or double click to exit the OSD 
menu. 
7.1 Image (Computer mode) 
  
Submenu 
options Description Operation method 
Brightness 
(**) Adjusts the brightness of the 
display image 
 • Press
						

							                        
17
7.2 Image (Video mode) 
 
 
 
Submenu 
options Description Operation method 
Brightness Adjusts the brightness of the 
display image. • Press
						

							                        
18
7.3 Display (Computer mode) 
 
 
 
Submenu options  Description  Operation method 
Frequency Minimizes any vertical bars 
or stripes visible on the 
screen background. • PressÅ Æ button to adjust 
(*). 
 
Phase Removes any horizontal 
distortion and clears or 
sharpens the displayed 
characters. • Press Å Æ button to 
adjust(*).
 
V position Adjusts the display image 
up and down. • PressÅ button to move down 
the display image. 
• PressÆ button to move up the 
display image.(*) 
 
H position Adjusts the display image 
left and right. • PressÅ button to move the 
display image to the left. 
• PressÆ button to move the 
display image to the right.(*) 
 
 
 
  
						

							                        
19
Proportion Switches between a display 
image mode of 4:3 or 16:9. • Press Å Æ button to choose. 
User color Activates individual red, 
green, or blue color 
correction controls. • Choose Yes, and the red gain, 
green gain, green gain option 
emerges. 
• Choose No, and only color 
temperature appears.   
Red Gain Customizes the red color 
levels. • PressÅbutton to reduce the 
red color levels of the image. 
• PressÆbutton to increase the 
red color levels of the 
image.(*) 
Green Gain Customizes the green color 
levels. • PressÅbutton to reduce the 
green color levels of the 
image. 
• PressÆbutton to increase the 
green color levels of the 
image.(*) 
Blue Gain Customizes the blue color 
levels. • PressÅbutton to reduce the 
blue color levels of the image. 
• PressÆbutton to increase the 
blue color levels of the 
image.(*) 
Color temperature Increases the red or blue 
tint of the display image. • PressÅbutton to reduce the 
color temperature, and the 
screen will display the warmer 
feeling.  
• PressÆbutton to increase the 
color temperature, and the 
screen will display the colder 
feeling.(*)  
* Press “Auto” button to return to previous setting.