Eiki Eip-3500 Dlp Projector Owners Manual

EIP-3500
OWNERS MANUAL
EIKI INDUSTRIAL CO., LTD. 

IMPORTANT
For your assistance in reporting the loss or theft of your
Projector, please record the Serial Number located on
the bottom of the projector and retain this information.
Before recycling the packaging, please ensure that you
have checked the contents of the carton thoroughly
against the list of “Supplied accessories” on page 10.
Model No.: EIP-3500
Serial No.: 

SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 10A fuse. Should
the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked 
 or  and of the same rating as
above, which is also indicated on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible...

The supplied CD-ROM contains SETUP GUIDE in English, German, French, Spanish, Italian, Portuguese and
Japanese.
Die mitgelieferte CD-ROM enthält Einrichtungs-Anleitung in Englisch, Deutsch, Französisch, Spanisch, Italienisch,
Portugiesisch und Japanisch.
Le CD-ROM fourni contient le guide d’installation en anglais, allemand, français, espagnol, italien, portugais et
japonais.
Den medföljande CD-ROM-skivan innehåller uppställningsguide på engelska, tyska, franska, spanska,
italienska, portugisiska och...

1
Before using the projector, please read this operation manual carefully.
1. WARRANTY
This is to assure that you immediately receive the full benefit of the parts, service and labor
warranty applicable to your purchase.
2. CONSUMER PRODUCT SAFETY ACT
To ensure that you will promptly receive any safety notification of inspection, modification, or
recall that EIKI may be required to give under the 1972 Consumer Product Safety Act, PLEASE
READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE.
WARNING:High...

2
WARNING:
The cooling fan in this projector continues to run for about 90 seconds after the projector enters the standby mode.
During normal operation, when putting the projector into standby mode always use the POWER button on the
projector or on the remote control. Ensure the cooling fan has stopped before disconnecting the power cord.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER CORD.
FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE.
Caution Concerning...

3
40
The menu can be operated to achieve two functions, adjustments and settings. (For setting
the menu items, see pages 42 and 43. )
Using the Menu Screen
Menu Selections (Adjustments)
Example: Adjusting “Bright”•This operation can also be performed by using the buttons on the projector.
Menu icons
ENTER 
buttonMENU button
UNDO button MOUSE/ 
Adjustment
button ('/"/\/|)
Adjustment 
buttons ('/"/\/|)
MENU buttonENTER button
Example: “Picture” screen menu for
INPUT 1 (RGB) mode1Press .•The...

4
Contents
Preparing
Setting up the Projector .............................. 19
Setting up the Projector ..................................... 19
Projecting a Reversed Image ............................ 20
Connections
Connections ................................................. 21
INPUT/OUTPUT Terminals and Connectable
Main Equipment .......................................... 21
Samples of Cables for Connection ............. 22
Connecting to a Computer .......................... 23
Using the Remote...

5
Reference
Appendix
Maintenance ................................................. 63
Maintenance Indicators ............................... 64
Regarding the Lamp .................................... 66
Lamp ................................................................. 66
Caution Concerning the Lamp .......................... 66
Replacing the Lamp .......................................... 66
Removing and Installing the Lamp Unit ............ 67
Resetting the Lamp Timer...

61. Read Instructions
All the safety and operating instructions should be read before
the product is operated.
2. Retain InstructionsThe safety and operating instructions should be retained for
future reference.
3. Heed WarningsAll warnings on the product and in the operating instructions
should be adhered to.
4. Follow InstructionsAll operating and use instructions should be followed.
5. CleaningUnplug this product from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use...