Home > Eiki > Projector > Eiki Eip-3500 Dlp Projector Owners Manual

Eiki Eip-3500 Dlp Projector Owners Manual

Here you can view all the pages of manual Eiki Eip-3500 Dlp Projector Owners Manual. The Eiki manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 51

47
Signal Type Setting
This function allows you to select the input sig-
nal type RGB or Component for INPUT 1 or IN-
PUT 2.
Menu operation  Page 42
Example: “Picture” screen menu for IN-
PUT 1 (RGB) mode
Description of Signal Type Settings
Description
Input signals are automatically recog-
nized as RGB or Component.
Set when RGB signals are received.
Set when Component signals are
received.
Selectable items
Auto
RGB
Component 

Page 52

48
You can adjust the computer image, match the computer display mode, and confirm the
input signal using the “Fine Sync” menu.
Computer Image Adjustment (“Fine Sync” menu)
Adjusting the Computer
Image
Use the Fine Sync function in case of irregulari-
ties such as vertical stripes or flickering in por-
tions of the screen.
Menu operation  Page 40
Example: “Fine Sync” screen menu for
INPUT 1 (RGB) mode
Description of Adjustment Items
Note
•You can automatically adjust the computer im-
age by setting “Auto...

Page 53

49
Auto Sync Adjustment
Used to automatically adjust a computer image.
Menu operation  Page 42
Example: “Fine Sync” screen menu for
INPUT 1 (RGB) mode
Description of Auto Sync Adjustment
Note
•Auto Sync adjustment is also performed by
pressing 
 on the projector or  on the re-
mote control.
•The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
•When the optimum image cannot be achieved
with Auto Sync adjustment, use manual adjust-...

Page 54

50
You can use the “Options1” menu to enhance the usage for the projector.
Checking the Lamp Life
Status
You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
Menu operation  Page 42
Example: “Options1” screen menu for
INPUT 1 (RGB) mode
Description of Lamp Timer (Life)
Note
•It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
•The table above indicates rough estimates in the
case of using only in each mode shown.
•Remaining lamp life...

Page 55

51
Setting the Video System
The video input system mode is factory preset
to “Auto”; however, a clear picture from the con-
nected audio-visual equipment may not be re-
ceived, depending on the video signal difference.
In that case, switch the video signal.
Menu operation  Page 42
Example: “Options1” screen menu for
INPUT 3 (Video) mode
Description of Video Systems
Note
•The video signal can only be set in INPUT 3 or
INPUT 4 mode.
•When “Video System” is set to “Auto”, you may
not receive a clear picture...

Page 56

52
Eco Mode
Menu operation  Page 42
Example: “Options1” screen menu for
INPUT 1 (RGB) mode
Description of Eco Mode
Note
•When “Eco Mode” is set to “” (Eco mode),
the power consumption will decrease and the
lamp life will extend. (Projection brightness de-
creases 13%.)
Brightness
87%
100%
Selectable items
(Eco mode)
(Standard mode)
Power consumption
(When using AC 100V)
320 W
370 WLamp lifeApprox.
3,000 hours
Approx.
2,000 hours
Selecting a Startup and
Background Image
Menu operation  Page 42
Example:...

Page 57

53
Auto Power Off Function
Menu operation  Page 42
Example: “Options1” screen menu for
INPUT 1 (RGB) mode
Description of Auto Power Off
Note
•When the Auto Power Off function is set to “”
(ON), 5 minutes before the projector enters the
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining minutes.
Description
The projector automatically enters the
standby mode when no input signal is
detected for 15 minutes or longer.
The Auto Power Off function will...

Page 58

54
Note
•If you input a wrong keycode, the cursor returns
to the first point of the “Old Code”.
•The preset keycode is 4 " buttons on the projec-
tor. If this keycode is set, the keycode input screen
does not appear when turning the power on.
3Press the 4 buttons on the remote
control or on the projector to enter
the new keycode in “New Code”.
Note
•You cannot use the following buttons for
keycode:
•POWER button
•L-CLICK/ENTER button
•R-CLICK/UNDO button
•MENU button
•AUTO FOCUS button
•ZOOM-FOCUS...

Page 59

55
Changing the keycode
1Press the buttons on the remote
control or on the projector to enter
the preset keycode in “Old Code”.
2Press the 4 buttons on the remote
control or on the projector to enter
the new keycode in “New Code”.
3Enter the same keycode in “Recon-
firm”.
When System Lock is set
If you have set the system lock, enter the
keycode and follow the procedure below to
release the system lock.
▼Input screen for keycode
Note
•When System Lock is set, the keycode input
screen appears after the...

Page 60

56
Helpful Functions Set during Installation (“Options2” menu)
Setting a Password
• •• •
•There is no factory preset for the password, so
the “Options2” menu is enabled.
• •• •
•If you do not want others to operate the “Op-
tions2” menu, set a password.
Menu operation  Page 42
Example: “Options2” screen menu
1Select “Password” from the “Op-
tions2” menu, and press 
.
•The screen for entering the password is displayed.
2Press 
' '' '
' or 
" "" "
" to set the first...
Start reading Eiki Eip-3500 Dlp Projector Owners Manual

Related Manuals for Eiki Eip-3500 Dlp Projector Owners Manual

All Eiki manuals