Elmo Boxi Mp-350 Quick Start Guide

 
 
 
 
 
 
  
 
 
 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
■ R ead this guide and the separate “IMPORTANT SAFEGUARD” carefully before 
using the  projector.  
■ This guide describes  the basic operation of the p rojector taking for example of the 
connection to a computer.  R efer to the i nstruction manual  of the BOXi  for any other 
operations  and  detailed  information.  
 
 
 
 
 
 
 
©2012 Copyright ELMO Co., Ltd. All rights reserved.  
Any names, company names and product names referred to in this...

 
2 
 
 
TABLE OF CONTENTS                                                 
 
TABLE OF CONTENTS  
  .......................................................................................  2
1 GETTING STARTED 
  ...........................................................................................  3
Checking the package contents  
  ...........................................................................  3
Part names and functions...

 
3 
 
 
1 GETTING STARTED 
 
Checking the package contents                       
 
Projector  AC adapter  Power cord  Remote control  
 
 
  
  
 
    
 
* Battery included  
 
Protective cover  IMPORTANT 
SAFEGUARD  WARRANTY CARD  CD-ROM  
 
 
 
*with  Hook and loop 
fastener  (2pcs)     
 
 
 
 
 
 
 
 
 
* QUICK START 
GUIDE included 
 
 
 
 
 
■ Refer to the  instruction manu al of the BOXi  for  details how to use 
the Protective cover. 
N o t e  

 
4 
 
Part names and functions                             
 
TOP/FRONT                TOP /BACK 
 
 
 
 
 
 
 
          
 
 
 
            
 
 
 
 
 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Control 
panel  
RGB IN  
HDMI USB 
DC IN 12V  
Security slot  
Rear panel 
Power indicator  
Wireless LAN indicator  Warning indicator  
Power button Menu button 
UP button 
LEFT button  RIGHT button  
DOWN button  
Enter button 
 
Rear panel 
Remote sensor 
Focus dial 
Lens 
Intake vents 
Speaker 
Exhaust vent  
Control...

 
5 
 
Remote control 
 
 
 
 
Preparing the remote control                          
 
A battery is pre- installed in the remote control 
at  the  time of shipment (with insulation sheet).  
Remove the insulation sheet before using the   
remote  control for the  first time.  
 
 
 
 
 
LEFT button  RIGHT button  
ENTER button  
 
Blank screen button  Input selection button  
Keystone + button 
Keystone - button  
Vo lum e ＋button  
Vo lum e－button  
MUTE button  
 
UP button  
DOWN button  
Menu button...

 
6 
 
 
2 USING THE PROJECTOR  
Installing the projector                               
 
Decide the position to place the projector.  
The distance between the projector and the screen should be between 48cm (screen 
size: 25 inch) and 133cm (screen size: 68 inch).   
 
 
 
 
 
 
 
 
Screen size Projection distance 
Inch Width  (cm) Height  (cm) L(cm) 
25  53.8  33.7  48 
30  64.6  40.4  58 
35  75.4  48.0  68 
40  86.1  53.8  78 
45  96.9  60.6  88 
50  107.7  67.3  98 
55  118.5  74.0  108 
60  129.2...

 
7 
 
 
Connecting to a  device                               
 
1.  Connect the power supply  (AC adapter and power cord) to the projector.  
2.   Connect the projector to the device such as a computer usi ng RGB  cable.  
 
  BACK 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
When using HDMI, use the HDMI terminal and HDMI cable (sold separately).  
RGB cable 
(Sold separately) 
Device (such as a computer) 
AC adapter 
Power cord 
-Connecting using RGB terminal  

 
8 
 
 
Powering on                                         
 
1. Press   button on the projector or the remote control.  
 
 
 
 
 
 
 
 
 
 
 
 
 
Power indicator 
 turns green. 
(Wireless  LAN indicator   turns on at the same time. ) 
 
The opening screen appears.  
 
 
 
 
■  It will take some time before you can operate the projector after the 
power i s on. 
■  Refer to the  instruction manual  of the BOXi  for  details about the 
wireless LAN indicator and functions of the wireless LAN.  
Remote...

 
9 
 
 
Detect ing the input signal                             
Wait until the projector automatically dete cts the input signal 
AUTO function to automatically detect the input signal is enabled  at the  time of 
shipment . When the device is connected using RGB  terminal or HDMI terminal, 
the input signal is detected automatically.  
 
 
 
 
 
 
Selecting the  input signal from the menu 
1.  Press   button  on the remote control or  button on the control panel.  
「Input  signal selection men u」...

 
10 
 
 
Adjusting the projected image                        
 
Focusing the image  
1. Use the focus dial to focus the image.  
 
 
 
 
 
 
 
Correcting the keystone distortions  
1. Press + or - of    button  on the remote control .  
「Keystone adjustment dialog 」 appears. 
 
 
 
 
 
 
 
 
 
 
2.  Press + or - of    button  on the remote control .  
Remote control   
Press＋button    
 
 
(Press this button when the projection 
angle is increasing.) 
Press
－button  
 
 
(Press this button when the...