Elmo Boxi Mp-350 Quick Start Guide
Have a look at the manual Elmo Boxi Mp-350 Quick Start Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 7 Elmo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
■ R ead this guide and the separate “IMPORTANT SAFEGUARD” carefully before using the projector. ■ This guide describes the basic operation of the p rojector taking for example of the connection to a computer. R efer to the i nstruction manual of the BOXi for any other operations and detailed information. ©2012 Copyright ELMO Co., Ltd. All rights reserved. Any names, company names and product names referred to in this guide are trademarks or registered trademarks of the r espective companies. MP-350 QUICK START GUIDE 《BOXi Instruction manual》 Download the instruction manual from the following BOXi website. BOXi Product Website：http://boxi.elmoglobal.com/ ENGLISH
2 TABLE OF CONTENTS TABLE OF CONTENTS ....................................................................................... 2 1 GETTING STARTED ........................................................................................... 3 Checking the package contents ........................................................................... 3 Part names and functions ..................................................................................... 4 Preparing the remote control ................................................................................ 5 2 USING THE PROJECTOR .................................................................................. 6 Installing the projector .......................................................................................... 6 Connecting to a device ......................................................................................... 7 Powering on ......................................................................................................... 8 Detecting the input signal ..................................................................................... 9 Adjusting the projected image ............................................................................ 10 Powering off ........................................................................................................ 11
3
1 GETTING STARTED
Checking the package contents
Projector AC adapter Power cord Remote control
* Battery included
Protective cover IMPORTANT
SAFEGUARD WARRANTY CARD CD-ROM
*with Hook and loop
fastener (2pcs)
* QUICK START
GUIDE included
■ Refer to the instruction manu al of the BOXi for details how to use
the Protective cover.
N o t e
4
Part names and functions
TOP/FRONT TOP /BACK
Control
panel
RGB IN
HDMI USB
DC IN 12V
Security slot
Rear panel
Power indicator
Wireless LAN indicator Warning indicator
Power button Menu button
UP button
LEFT button RIGHT button
DOWN button
Enter button
Rear panel
Remote sensor
Focus dial
Lens
Intake vents
Speaker
Exhaust vent
Control panel
5 Remote control Preparing the remote control A battery is pre- installed in the remote control at the time of shipment (with insulation sheet). Remove the insulation sheet before using the remote control for the first time. LEFT button RIGHT button ENTER button Blank screen button Input selection button Keystone + button Keystone - button Vo lum e ＋button Vo lum e－button MUTE button UP button DOWN button Menu button Power button Insulation sheet
6 2 USING THE PROJECTOR Installing the projector Decide the position to place the projector. The distance between the projector and the screen should be between 48cm (screen size: 25 inch) and 133cm (screen size: 68 inch). Screen size Projection distance Inch Width (cm) Height (cm) L(cm) 25 53.8 33.7 48 30 64.6 40.4 58 35 75.4 48.0 68 40 86.1 53.8 78 45 96.9 60.6 88 50 107.7 67.3 98 55 118.5 74.0 108 60 129.2 80.8 11 8 65 140.0 87.5 128 68 146.5 91.5 133 → Refer to the i nstruction manual of the BOXi for detailed information. ■ The values in the table are design values and may vary. Use them as an indication only. ■ The aspect ratio of the projected image in full screen is 16:10. When the aspect ratio of the input signal is different from 16:10 (such as 16:9 or 4:3), top and bottom or left and right of the image will not be displayed and the screen size becomes smaller than those specified in the above table. N o t e L Screen size (inch) Width Height
7 Connecting to a device 1. Connect the power supply (AC adapter and power cord) to the projector. 2. Connect the projector to the device such as a computer usi ng RGB cable. BACK When using HDMI, use the HDMI terminal and HDMI cable (sold separately). RGB cable (Sold separately) Device (such as a computer) AC adapter Power cord -Connecting using RGB terminal
8 Powering on 1. Press button on the projector or the remote control. Power indicator turns green. (Wireless LAN indicator turns on at the same time. ) The opening screen appears. ■ It will take some time before you can operate the projector after the power i s on. ■ Refer to the instruction manual of the BOXi for details about the wireless LAN indicator and functions of the wireless LAN. Remote control Control panel N o t e
9 Detect ing the input signal Wait until the projector automatically dete cts the input signal AUTO function to automatically detect the input signal is enabled at the time of shipment . When the device is connected using RGB terminal or HDMI terminal, the input signal is detected automatically. Selecting the input signal from the menu 1. Press button on the remote control or button on the control panel. 「Input signal selection men u」 appears. 2. Select the input s ignal using buttons. 3. Press button to execute. Input signal selection menu HDMI RGB USB WiFi HDMI RGB Remote control Control panel ■ Take the following steps to select the input signal manually. ■ Input signal selection can only be done from the menu when USB or WiFi is selected. ■ Refer to the instruction manual of the BOXi for details about the operation. N o t e N o t e
10 Adjusting the projected image Focusing the image 1. Use the focus dial to focus the image. Correcting the keystone distortions 1. Press + or - of button on the remote control . 「Keystone adjustment dialog 」 appears. 2. Press + or - of button on the remote control . Remote control Press＋button (Press this button when the projection angle is increasing.) Press －button (Press this button when the projection angle is decreasi ng.) Keystone adjustment dialog Remote control