Epson 1761 W Manual

b
Select  Screen  Size,  and  then  press  the  [
] button.
c
Select  the  screen  size  you  want  to  display,  and  then  press  the  [
]
button.
The  projected  images  will  appear  as  shown  below  after  setting  the  screen
size.
Equal Larger Left
Larger Right
a
•You  cannot  enlarge  both  the  left  screen  and  right  screen  images  at
the  same  time.
•When  one  image  is  enlarged,  the  other  image  is  reduced.
•Depending  on  the  video  signals  that  are  input,  the  images  on...

Restriction  relating  to  images
•The  default  values  for  the  Image menu  are  applied  to  the  image  on  the
right  screen.  However,  the  settings  for  the  image  projected  on  the  left
screen  are  applied  to  the  image  on  the  right  screen  for  Color  Mode,
Abs.  Color  Temp., and Color  Adjustment.
•The  setting  value  Off for  Progressive and  Noise  Reduction is  applied
to  the  image  on  the  right  screen.s
 "Signal  Menu"  p.81
•When  there  is  no  image  signal...

Slideshow  examples
Projecting  images  stored  on  USB  storages
 "Projecting  images  or  movies"  p.55
s
 "Projecting  image  files  in  a  folder  in  sequence  (Slideshow)"  p.58
Projecting  PowerPoint  files  converted  in  EasyMP  Slide  Converter
See  the  following  manual  for  more  information  on  converting  PowerPoint
files  to  scenarios  using  EasyMP  Slide  Converter.s
 EasyMP  Slide  Converter  Operation  Guide
Slideshow  operating  methods
Although  the  following...

•The  following  files  are  displayed  as  thumbnails  (file  contents  are
displayed  as  small  images).
- JPEG files
-  FSE  files  (an  image  of  the  first  slide)
- PDF files (an image of the first page of the PDF)
- AVI files (an image 15 seconds from the start of the movie)
•Other  files  or  folders  are  displayed  as  icons  as  shown  in  the
following  table.
Icon File Icon File
FSE  files
*
BMP  files
JPEG  files
*
GIF  files
AVI  (Motion  JPEG)
files
*
PNG  files
PDF  files
*
*When  it...

a
If  not  all  of  the  files  and  folders  are  displayed  on  the  current
screen,  press  the  [
]]  button  on  the  remote  control,  or  position
the  cursor  on  Next  Page at  the  bottom  of  the  screen  and  press
the  [
]  button.
To  return  to  the  previous  screen,  press  the  [[]  button  on  the
remote  control,  or  position  the  cursor  on  Previous  Page at  the
top  of  the  screen  and  press  the  [
]  button.
b
Press  the  [
] button.
The  selected  image  is  displayed.
When...

b
Press  the  [
],  [
],  [
],  or  [
]  button  to  select  the
image  file  you  want  to  project.
c
Press  the  [
] button.
The  image  is  displayed  or  the  movie  is  played  back.
a
Press  the  [
][
]  buttons  to  move  to  the  next  or  previous
image  file.
d
To  finish  projecting,  perform  one  of  the  following  operations.
•Projecting  an  image:  Press  the  [Esc]  button.•Projecting  a  movie:  Press  the  [Esc]  button  to  display  the  message
screen,  select  Exit,  and  then...

c
Press  the  [
] button.
The  first  page  in  the  PDF  file  is  displayed  at  full  screen  size.
You  can  perform  the  following  operations  while  a  PDF  file  is  displayed.
•Page  Up/Down
While  a  page  is  displayed  at  full  screen  size,  press  the  [
] or
[
]  button  to  go  to  the  previous  or  next  page.•Selecting  a  page
Press  the  [Esc]  button  to  display  the  select  page  menu.
Select  the  page  you  want  to  project  using  the  [
] or [
]  button,  and
then  press...

•Rotating  a  page
While  a  page  is  displayed  at  full  screen  size,  press  the  [
] or [
]  button
to  rotate  all  pages  in  the  PDF  by  90  degrees.
Closing  PDF  file  display
a
Press  the  [Esc]  button  while  a  PDF  file  is  being  displayed.
The  select  page  menu  is  displayed.
b
Press  the  [
] or [
] button to select Exit.
c
Press  the  [
] button.
The  PDF  file  being  displayed  closes  and  the  file  select  screen  is
displayed.
a
The  following  operations  cannot  be...

a
If  Screen  Switching  Time on  the  Option screen  is  set  to  No, files do
not  change  automatically  when  you  select  Play  Slideshow.  Press  the
[
]  button,  the  [
]  button,  or  the  []]  button  to  display  the  next
file.
Playing  a  scenario
a
Start  Slideshow.
The  file  list  screen  is  displayed.s
 "Starting  Slideshow"  p.53
b
Press  the  [
],  [
],  [
],  or  [
]  button  to  select  the
scenario  you  want  to  playback.
c
Press  the  [
] button.
Playback  starts....

the  [Esc]  button.  Select  Option from  the  submenu  displayed,  then
press  the  [
] button.
b
When the following Option screen is displayed, set each of the
items.
Select  any  of  the  options  as  necessary  and  press  the  [
]  button  to
enable  settings.
The  following  table  shows  the  details  for  each  item.
Display Order
You can select to display the files in Name Order or
Date Order.
Sort Order
You can select to sort the files In Ascending or In
Descending order.
Continuous Play
You...