Home > Epson > Printer > Epson AcuLaser C2600DTN User Manual

Epson AcuLaser C2600DTN User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Epson AcuLaser C2600DTN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 473
    							Paper Handling51
    3
    3
    3
    3
    3
    3
    3
    3
    3
    3
    3
    3
    3. Load a stack of paper into the paper cassette. Make sure to 
    load it with the printable surface up.
    Note:
    ❏Load paper after aligning the edges of the paper carefully.
    ❏Do not load paper that exceeds the maximum stack height.
    ❏To change the paper size loaded in the paper cassette, see  
    Changing the paper size on page 52 for instructions.
     
    						
    							52Paper Handling 4. Reinsert the paper cassette.
    Note:
    After loading paper, set the LC Size setting to match the loaded 
    paper size on the control panel.
    Changing the paper size
    Follow the steps below to change the paper size loaded in the 
    paper cassette.
    1. Pull out the paper cassette. If paper is loaded in the paper 
    cassette, remove it.
     
    						
    							Paper Handling53
    3
    3
    3
    3
    3
    3
    3
    3
    3
    3
    3
    3
    2. Push the tray in the paper cassette down.
    3. Remove the three screws securing the tray in the paper 
    cassette.
     
    						
    							54Paper Handling 4. Slide the three paper guides to fit the paper size that you want 
    to use.
    5. Secure the three paper guides with the three screws.
     
    						
    							Paper Handling55
    3
    3
    3
    3
    3
    3
    3
    3
    3
    3
    3
    3
    6. Load the paper and reinsert the paper cassette.
    Note:
    After loading paper, set the LC Size setting to match the loaded 
    paper size on the control panel.
    Output tray
    The output tray is located on the top of the printer. Since printouts 
    are output face-down, this tray is also referred to as the face-down 
    tray. This tray can hold up to 250 sheets.
     
    						
    							56Paper Handling If the printouts do not stack well, open the extension on the output 
    tray.
    Printing on Special Media
    You can print on special media which include Epson paper such 
    as the following. 
    Note:
    Since the quality of any particular brand or type of media may be changed 
    by the manufacturer at any time, Epson cannot guarantee the quality of 
    any type of media. Always test samples of media stock before purchasing 
    large quantities or printing large jobs.
    EPSON Color Laser Paper
    When loading EPSON Color Laser Paper, you should make paper 
    settings as shown below:
    ❏Make settings on the Basic Settings in the printer driver.
     
    						
    							Paper Handling57
    3
    3
    3
    3
    3
    3
    3
    3
    3
    3
    3
    3
    ❏You can also make these settings on the Tray Menu in the 
    control panel. See  Tray Menu on page 229.
    EPSON Color Laser Transparencies
    Epson recommends the use of EPSON Color Laser 
    Transparencies.
    Note:
    Duplex printing is not available for transparencies.
    Transparencies can be loaded into the MP tray only. When using 
    transparencies, you should make paper settings as shown below:
    ❏Make settings on the Basic Settings in the printer driver.
    ❏You can also make these settings on the Tray Menu in the 
    control panel. See  Tray Menu on page 229.
    Please note the following when handling this media: Paper Size:A4
    Paper Source:MP Tray (up to 150 sheets or up to 
    16.5 mm thick stack),
    Lower Cassette (up to 500 sheets 
    or up to 55 mm thick stack)
    Paper Type:Plain
    Paper Size:A4 or LT
    Paper Source:MP Tray (up to 60 sheets)
    Paper Type:Transparency
     
    						
    							58Paper Handling ❏Hold each sheet by its edges, as oil from your fingers may 
    transfer to the surface and damage the printable surface of the 
    sheet. The Epson logo appears on the printable side.
    ❏When loading transparencies in the MP tray, insert the short 
    edge first as shown below.
    ❏When using transparencies, load them in the MP tray and set 
    the Paper Type setting to Transparency in the printer driver.
    ❏When the Paper Type setting in the printer driver is set to 
    Transparency, do not load any other type of paper except 
    transparencies.
    ❏When printing transparencies, the printing speed is extremely 
    slow.
    c
    Caution:
    Sheets that have just been printed on may be hot.
    Envelopes
    The print quality of envelopes may be irregular because different 
    parts of an envelope have different thicknesses. Print one or two 
    envelopes to check the print quality.
     
    						
    							Paper Handling59
    3
    3
    3
    3
    3
    3
    3
    3
    3
    3
    3
    3
    c
    Caution:
    Do not use window envelopes. The plastic on most window 
    envelopes will melt when it comes into contact with the fuser.
    Note:
    ❏Depending on the quality of envelopes, the printing environment, 
    or the printing procedure, envelopes might be wrinkled. Make a trial 
    print run before you print on a lot of envelopes.
    ❏Duplex printing is not available for envelopes.
    When loading envelopes, you should make paper settings as 
    shown below:
    ❏Make settings on the Basic Settings in the printer driver.
    ❏You can also make these settings on the Tray Menu in the 
    control panel. See  Tray Menu on page 229.
    Please note the following when handling this media.Paper Size:IB5, C6, MON, C10, DL, or C5
    Paper Source:MP Tray (up to 15 sheets, or a 
    stack up to 16.5 mm thick)
    Paper Type:Normal
     
    						
    							60Paper Handling ❏When printing on envelopes, be sure to set the lever on the 
    fuser unit to the envelope position before loading the 
    envelopes. After printing envelopes, be sure to reset the lever 
    to the original position. Printing on media other than 
    envelopes when the lever is set to the envelope position may 
    cause poor print quality because the printer fails to fix toner 
    to the media. It also may cause paper jam and dirty printouts 
    because of the toner that adheres to the rollers inside the 
    printer. When this happens, reset the lever to the original 
    position and print blank pages until the printouts are clean.
    c
    Caution:
    Be careful not to touch the fuser, which is marked CAUTION 
    HIGH TEMPERATURE, or the surrounding areas. If the 
    printer has been in use, the fuser and the surrounding areas 
    may be very hot. If you must touch one of these areas, open 
    cover A and B, then wait 30 minutes to allow the heat to 
    subside before doing so.
     
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson AcuLaser C2600DTN User Manual