Epson Aculaser CX16 User Manual

Chapter 2
Control Panel and Configuration Menu
About the Control Panel
AcuLaser CX16NF
12 1314 12
3 4 10 15 16 17 1857768 9 11
AcuLaser CX16
57687911
18 17 10 15 16
Control Panel Indicators and Keys
No. Name Function
1
Addressbook key 
(AcuLaser CX16NF only)Displays the information registered in the favorite list, speed dial destinations and
group dial destinations.
For details, refer to the Facsimile User’s Guide.
2
Auto RX indicator 
(AcuLaser CX16NF only)Lights up when the automatic receiving function...

No. Name Function
3
Redial/Pause key 
(AcuLaser CX16NF only)Recalls the last number dialed. Inserts a pause when a number is dialed.
For details, refer to the Facsimile User’s Guide.
4
On hook key 
(AcuLaser CX16NF only)Sends and receives transmissions with the receiver on the hook.
For details, refer to the Facsimile User’s Guide.
5
Message windowDisplays settings, menus, and messages.
6
u/d keysMoves up and down through menus, options, or choices.
7
l/r keysMoves left and right through menus, options,...

Display Indications
Main Screen (Copy Mode)
AcuLaser CX16NF
34
1
2
AcuLaser CX16
34
1
2
No. Indication Description
1 Copy settings Allows the current settings to be checked and the various settings to be changed.
For details, refer to “Main Screen (Copy Mode)” on page 23.
2 Status Depending on the situation, the machine status or an error message may appear.
3 Copy density Indicates the copy density.
AUTO appears when DENSITY is set to AUTO and the TEXT copy mode is selected.
4 Number of copies Indicates...

❏Copy settings
AcuLaser CX16NF
1
2
3
4
5
6
7
8
9
AcuLaser CX16
1
2
3
4
5
6
AcuLaser CX16 Series     Printer / Copier / Scanner User’s Guide
Control Panel and Configuration Menu     24
 

No. Indication Description
1 Media tray / Media size For AcuLaser CX16NF
Indicates the media tray that is selected. For details on selecting the media tray,
refer to “Selecting the Media Tray (AcuLaser CX16NF only)” on page 80.
For AcuLaser CX16
The media size setting can be changed with TRAY1 PAPER SETUP in the UTILITY
menu. For details, refer to “TRAY1 PAPER SETUP Menu” on page 34.
2 Zoom ratio Indicates the zoom ratio that is specified. For details on specifying the zoom ratio,
refer to “Specifying...

No. Indication Description
1 Scan settings Allows the current settings to be checked and the various settings to be changed.
For details, refer to “Main Screen (Scan Mode) (AcuLaser CX16NF only)” on page
25.
2 Status Depending on the situation, the machine status or an error message may appear.
3 Available memory Indicates the percentage of memory available for scanning operations.
❏Scan settings
1
2
3
4
5
6
7
8
9
No. Indication Description
1 Data format Indicates the data format that is selected. For...

No. Indication Description
5 Scan  color Indicates the scan color that is selected. For details on selecting the scan color, refer
to “Setting the Scan Color” on page 115.
6 SUBJECT Select this menu item to specify the subject. For details on specifying the subject,
refer to “Specifying the Subject” on page 116.
Note: 
This menu item does not appear if an FTP address or SMB address was specified as
the destination.
7 CANCEL RESERV. Select this menu item to display the list of jobs queued for transmission...

To cancel printing, press the Stop/Reset key when the print screen appears. Press the Select key to
select YES.
12
No. Indication Description
1 Status Displays messages indicating operations such as printing.
2 Media tray/media size Indicates the media tray and media size that is selected.
Note:
When a print job is received from the printer driver, the paper size specified with the printer driver has
priority if it is different from the paper size specified from the control panel with TRAY1 PAPER SETUP...

TONER REMAINING
A general estimate of the amount of toner remaining in the toner cartridges can be viewed.
Note:
If the Select key is held down for at least 2 seconds while the screen described above is displayed, the
configuration page will be printed.
T/C CHANGE
REPLACE MODE Switches the machine to the REPLACE MODE.
This mode is used when replacing a toner cartridge.
For details on replacing a toner cartridge, refer to “Replacing a Toner
Cartridge” on page 119.
Note: 
To return to normal operation mode...

REPORT/STATUS Menu
To display the REPORT/STATUS screen, select REPORT/STATUS in the main screen, and then press
the Select key. From this menu, the total number of pages printed by this machine can be viewed. In
addition, the reports can be printed. The REPORT/STATUS menu is structured as shown below.
Note:
To return to the previous screen, press the Back key. To display the main screen, press the Stop/Reset
key.
TOTAL PRINT
The total number of pages for each of the following can be checked.
TOTAL PRINT...