Epson M2000 Service Manual

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision BDISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 1122. Disconnect the connector from the Main Board Assy, and release the cable from the Clamp.3. Remove the two screws.
B) Silver / M3x10 / P-Tite: Two pieces
4. Pull out the guide pin of the Paper Eject Unit from the hole.
B
B
Connector
Main Board Assy
Guide Pin
Right Side
Clamp
Paper Eject Unit
5. Remove the two screws.
B)Silver / M3x10 / P-Tite: Two pieces
6. Pull out the guide pin of the Paper Eject Unit from the hole, and remove the Paper Eject 
Unit.
BB
Paper Eject Unit
Guide Pin
Left Side 
						

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision BDISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 1134.3.8  Group 8CONTENT
Parts/Units to be Disassembled
Guide
Control PanelControl Panel BoardTop CoverLeft Cooling Fan Motor
ABCD
Control Panel BoardControl Panel
AB
Top Cover
Left Cooling Fan MotorCD 
						

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision BDISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 114DISASSEMBLY FLOWCHART
B4
C5D6
B1
A1
D1
C1
D2
C2
B2
A2
D3
C3
D4D5C4
B3
A3
Start
Control Panel
(P. 116)
Top Cover(P. 118)
Left Cooling Fan Motor
(P. 118)Left Cover(P. 117)
Control Panel Board
(P. 117)
Controller Cover
(P. 115)Right Cover(P. 115) 
						

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision BDISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 115
Controller Cover
1. Remove the screw.
A) Silver / M3x6 / S-Tite: One piece
2. Remove the Controller Cover in the direction of the arrow.
A1
B1
C1
D1
A
Controller Cover
Right Cover
1. Open the Front Cover.2. Slightly pull out the Paper Cassette.3. Remove the screw.
A) Silver / M3x10 / P-Tite: One piece
4. Disengage the five hooks of the Right Cover in the order from the rearmost hook to the 
frontmost hook, and remove the Right Cover.
A2
B2
C2
D2
Hooks
A 
						

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision BDISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 116
Control Panel
1. Disconnect the connector from the Main Board Assy.
A3
B3
C3
D3
Connector(CN405)
2. Open the Top Cover.3. Remove the two screws.
A) Silver / M3x6 / S-Tite: One pieceB) Silver / M3x10 / P-Tite: One piece
4. Pull out the tab from the guide pin, and remove the Control Panel while pulling out the 
cable.
B
A
Control Panel
Guide Pin 
						

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision BDISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 117
Control Panel Board
1. Remove the two screws, and remove the metal plate.
A) Silver / M3x6 / P-Tite: Two pieces
2. Remove the screw, and remove the Control Panel Board.
A) Silver / M3x6 / P-Tite: One piece
3. Disconnect the connector from the Control Panel Board.
B4
A
A
Step 1
Metal plate
A
Control Panel Board
Step 2,3
Connector
Left Cover
1. Open the Top Cover.2. Slightly pull out the Paper Cassette.3. Remove the three screws.
A) Silver / M3x10 / P-Tite: Three pieces
4. Disengage the six hooks of the Left Cover in the order from the rearmost hook to the 
frontmost one, and remove the Left Cover.
C4
D4
Left Cover
Hooks
AA
A 
						

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision BDISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 118
Top Cover
1. Remove the two screws, and remove the Top Cover.
A) Silver / M3x6 / P-Tite: Two pieces
C5
D5
A
A
Left Cooling Fan Motor
1. Disconnect the connector from the LVPS Unit, and release the cables from the two Clamps.2. Disengage the four hooks and remove the Duct.3. Disengage the grounding spring from the hook, and remove the Left Cooling Fan Motor.
D6
Grounding Spring
Duct
ClampConnector
Hook
Hook 
						

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision BDISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 1194.3.9  Group 9CONTENT
Parts/Units to be Disassembled
Guide
Laser Scanner UnitEraser Lamp
AB
Laser Scanner Unit
Eraser Lamp
A
B 
						

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision BDISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 120DISASSEMBLY FLOWCHART
A6
B7B1
A1
B2
A2
B3
A3
B4
A4
B5B6
A5
Start
Control Panel
(P. 122)Top Cover(P. 123)Left Cover(P. 123)
Controller Cover
(P. 121)Right Cover(P. 121)
Laser Scanner Unit
(P. 124)Eraser Lamp
(P. 125) 
						

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision BDISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 121
Controller Cover
1. Remove the screw.
A) Silver / M3x6 / S-Tite: One piece
2. Remove the Controller Cover in the direction of the arrow.
A1
B1
A
Controller Cover
Right Cover
1. Open the Front Cover.2. Slightly pull out the Paper Cassette.3. Remove the screw.
A) Silver / M3x10 / P-Tite: One piece
4. Disengage the five hooks of the Right Cover in the order from the rearmost hook to the 
frontmost hook, and remove the Right Cover.
A2
B2
Hooks
A