Epson M2000 Service Manual

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision BDISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 132DISASSEMBLY FLOWCHART (CONSUMABLES)
A4B1
A1C1
B2
A2C2
B3
A3C3
C4B4C5
Start
Paper Cassette
(P. 133)
PF Paper Feed Clutch
(P. 135)
PF Paper Conveyance Clutch
(P. 135)
PF Paper Feed Motor
(P. 134)
Paper Feed Unit
(P. 134)Top Cover(P. 133) 
						

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision BDISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 133
Paper Cassette
1. Remove the Paper Cassette.
A1
B1
C1
Paper Cassette
Top Cover
1. Remove the two screws.
A) Silver / M3x6 / S-Tite: Two pieces
2. Disengage the two hooks by inserting a flat-blade screwdriver or similar tool into a gap 
between the Top Cover and the Paper Feed Unit, and remove the Top Cover.
A2
B2
C2
A
A
Hooks
Top Cover 
						

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision BDISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 134
Paper Feed Unit
1. Remove the Paper Feed Unit upward.
A3
B3
C3
Paper Feed Unit
PF Paper Feed Motor
1. Remove the four screws.
A) Silver / M3x6 / S-Tite: Four pieces
2. Disconnect the connector from the PF Paper Feed Motor, and remove the motor.
A4
Connector
AA
AA
PF Paper Feed Motor 
						

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision BDISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 135
PF Paper Feed Clutch
1. Release the cables from the three clamps and disconnect the relay connector.2. Remove the two screws that secure the grounding terminal, and remove the metal plate.
A) Silver / M3x6 / S-Tite: Two pieces
3. Remove the PF Paper Feed Clutch.
†
Connect the connector to the relay connector connected to the white cable.
†
Match the tab of the metal plate with the Rotation Stopper of the Paper Feed Clutch.
†
The grounding terminals should be screwed with the metal plate.
B4
C4
A
A
Clamps
PF Paper Feed Clutch
Tab and Rotation
 Stopper
Relay Connector
PF Paper Conveyance Clutch
1. Release the cables from the clamp and disconnect the relay connector.2. Remove the two screws, and remove the metal plate.
A) Silver / M3x6 / S-Tite: Two pieces
3. Remove the PF Paper Conveyance Clutch.
†
Connect the connector to the relay connector connected to the black cable.
†
Match the tab of the metal plate with the Rotation Stopper of the Paper Conveyance Clutch.
C5
A
A
PF Paper 
Conveyance Clutch
Tab and 
Rotation Stopper
Clamp
Relay Connector 
						

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision BDISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 1364.3.12  Group 12CONTENT
Parts/Units to be Disassembled
Guide
PF Main BoardPF Paper Feed Sensor
AB
PF Main Board
PF Paper Feed Sensor
B
A 
						

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision BDISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 137DISASSEMBLY FLOWCHART (CONSUMABLES)
A2B1
A1
B2
Top Cover(P. 138)
PF Paper Feed Sensor
(P. 139)
PF Main Board
(P. 138)Start 
						

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision BDISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 138
Top Cover
1. Remove the two screws.
A) Silver / M3x6 / S-Tite: Two pieces
2. Disengage the two hooks by inserting a flat-blade screwdriver or similar tool into a gap 
between the Top Cover and the Paper Feed Unit, and remove the Top Cover.
A1
B1
A
A
Hooks
Top Cover
PF Main Board
1. Remove the two screws.
A) Silver / M3x6 / S-Tite: Two pieces
2. Disconnect the five connectors, and remove the PF Main Board.
The grounding terminal should be screwed together with the PF Main Board.A2
A
A
Grounding Terminal
Connector 
						

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN Revision BDISASSEMBLY AND ASSEMBLY      Main Unit Disassembly/Reassembly 139
PF Paper Feed Sensor
1. Remove the actuator.2. Disengage the hook and remove the PF Paper Feed Sensor.3. Disconnect the connector from the PF Paper Feed Sensor.
B2
PF Paper Feed Sensor
Actuator
Connector
Hook 
						

							 
CHAPTER
5
ADJUSTMENT 
						

							EPSON AcuLaser M2000D/M2000DN/M2010D/M2010DN
Revision B
ADJUSTMENT     
Adjustment Item
141
5.1  Adjustment ItemThe table below shows the adjustment item (including life counter clear) required when the specified part/unit is fixed or replaced.
Part/Unit
Timing
Item
Adjustment Procedure
Required Jig & Tool
Reference
Main Board Assy.
After replaced with a new one
Writing of USB-ID
Execute the item using the dedicated program.
EPSON Page Printer Main Board Initialization Tool 
Page 142
As needed
Updating of controller firmware
Execute the item using the dedicated program.
Firmware Update Tool
Page 145
As needed
Updating of engine controller firmware
Execute the item using the dedicated program.
Firmware Update Tool