Epson P4000 Manual

Direct Printing51
6
6
6
6
6
6
6
6
6
6
EnglishChapter 6
Direct Printing
Preparing to Print
You can print an image by connecting P-4000 directly 
to a printer. This section describes how to print the 
images on the P-4000.
Supported printers
P-4000 supports printers that are compatible with USB 
DIRECT-PRINT.
Available types of paper
P-4000 supports the following sizes and types of 
paper.Note:
For details about paper, see your printer’s manuals.
Connecting P-4000 to a printer
The following procedure shows...

52Direct Printing
1. Make sure that P-4000 and the printer are turned 
off. Then remove the USB connector rubber cover.
2. Connect the USB cable to the P-4000.3. Connect the other end of the USB cable to the 
connector on the printer.
Note:
❏See your printer’s manual for the location of the 
cable connector on your printer.
❏Remove the USB cable when you operate P-4000 
if it is not connected to a computer or printer. 

Direct Printing53
6
6
6
6
6
6
6
6
6
6
EnglishPrinting Images
Note:
Use the AC adapter when printing.
1. Select the image to print.
2. Press the Print button.
3. If you want to print only the selected image, select 
Print This Image. If you want to print all the 
images in the folder, select Print All Images. If you 
want to select the images to be printed in the 
folder, select Selected Images to Print. Then 
press the OK button.Note:
When you select Selected Images to Print, the 
following screen...

54Direct Printing
Note:
❏See the following “Printer settings” for details of 
each setting.
❏The settings you made will be cleared when the 
image has finished printing.
❏You cannot print the JPEG file if the vertical or 
the horizontal size of the image exceeds 4600 
pixels.
Printing starts. The LCD turns off during printing 
and turns on again when the printing is finished. 
The LCD also turns on when you press any button 
during printing.Printer settings
* If the image does not have the date...

Direct Printing55
6
6
6
6
6
6
6
6
6
6
English2. Press the Menu button to display the pop up 
menu, and select Print Order by using the Up or 
Down button. 
3. Press the Up or Down button to change the 
quantity of the selected image to print.Note:
If you select the image in full screen, the screen that 
appears on your LCD is different from the above, but 
the instruction is the same.
4. After you set the quantity, select a different image 
by using the Right or Left button.
5. Repeat steps 3 and 4 until...

56Using P-4000 With Other Devices
Chapter 7
Using P-4000 With Other Devices
Using P-4000 With a Computer
Connect P-4000 to a computer to display data on the 
monitor, copy data from the computer to P-4000, or 
from P-4000 to the computer. The computer 
recognizes P-4000 as an external HDD. 
When using P-4000 with your computer, install the 
software from the software CD-ROM. For details, see 
“Installing the Software” on page 63.
Note:
When using P-4000 while it is connected to a computer, use 
the AC...

Using P-4000 With Other Devices57
7
7
7
7
7
7
7
7
7
7
English2. Connect the USB cable to your computer. Then 
remove the USB connector rubber cover and 
connect the other end of the USB cable to P-4000.
The PC peripheral mode icon ( ) is displayed 
for a short time, then the LCD turns off.
Note:
The LCD turns on when any button is pressed.
3. Start EPSON Photo!4, which you have installed 
on your computer from the CD-ROM. You can 
display or copy data with EPSON Photo!4. See the 
online EPSON Photo!4...

58Using P-4000 With Other Devices
Disconnecting P-4000 from a computer
For Windows users
1. Click Unplug or Eject Hardware on the 
computer screen.
Note:
The above message varies depending on your version 
of Windows.
2. Turn off P-4000 and remove the USB cable from 
the computer.
Note:
On Windows 98, when removing the cable from the 
computer after storing data to the computer without 
turning the computer off, the blue screen is displayed. 
To avoid this, turn the computer off before removing 
the...

Using P-4000 With Other Devices59
7
7
7
7
7
7
7
7
7
7
English2. Connect a commercially available AV cable to the 
TV. Then connect the other end of the AV cable to 
P-4000.
3. Set the TV display to video input from P-4000.
Note:
❏You can connect the AV cable to P-4000 even when 
P-4000 is on.
❏The LCD turns off when you connect an AV cable to 
P-4000.
❏Some monitors cannot display full images and the top 
and bottom parts may be missing. 

60Customizing Settings
Chapter 8
Customizing Settings
This section describes how to customize P-4000 
settings. You can customize various settings for 
displaying and copying images, or turn on the sound 
setting to make your P-4000 more fun to use.
Changing the P-4000 Settings
The settings described in the following sections can be 
changed from the Settings menu. To display the 
Settings menu, select Settings in the Home screen and 
press the OK button.The following table shows details of each...