Epson Powerlite Home Cinema 2000 Users Guide

							

7.
Select theWireless LANmenu andpress Enter.
 8.
Select thesettings onthe Wireless LANmenu asnecessary foryour network.
 Note:
Some itemsmaybeunavailable ifQuick orAdvanced connection modeisselected.
 9.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 After
youcomplete thewireless settingsforyour projector, youneed toselect thewireless networkon
 your
computer.
 Wireless
LANMenu Settings
 Parent
topic:Wireless NetworkProjection
 Related
references
 Projector
NetworkSettings-Network Menu
 Wireless
LANMenu Settings
 Setting
 Options
 Description

Wireless
LANPower
 On
 Turns
onwireless LANsupport
 Off

41 
						

							

Setting
 Options
 Description

Connection
Mode
 Quick
 Selects
thetype ofwireless
 connection:

Advanced

Quick
:lets you quickly connect
 to
one computer, smartphone, or
 tablet

Advanced
:lets you connect a
 wireless
networkaccesspoint
 Channel
 1ch
 In
Quick connection mode,
 selects
thefrequency band
 6ch

(channel)
usedbythe wireless
 11ch

LAN

SSID
 Up
to32 alphanumeric
 Sets
theSSID (network name)of
 characters
(nospaces)
 the
wireless LANsystem the
 projector
isconnecting to
 Search
Access Point
 —
 Displays
theaccess pointstatus;
 indicates
currentlyconnected
 access
points; indicates
 access
pointswhere security is
 set

IP
Settings
 DHCP
(On orOff )
 Selects
DHCPifyour network
 assigns
addresses automatically,
 IP
Address
 or
turns offDHCP soyou can
 Subnet
Mask
 enter
thenetworks IPaddress,
 subnet
mask,andgateway
 Gateway
Address
 address
asneeded
 SSID
Display
 On
 Selects
whether todisplay the
 SSID
onthe network standby
 Off

screen

IP
Address Display
 On
 Selects
whether todisplay theIP
 address
onthe network standby
 Off

screen

Parent
topic:Selecting WirelessNetworkSettingsManually
 42   
						

							

Selecting
WirelessNetworkSettingsinWindows
 Before
connecting tothe projector, selectthecorrect wireless networkonyour computer.
 1.
Toaccess yourwireless utilitysoftware, double-click thenetwork icononthe Windows taskbar.
 2.
Doone ofthe following:
 •
Ifyour projector isset uponanexisting network (Advanced mode),selectthenetwork name
 (SSID).

•
Ifyour projector isconfigured forQuick mode, selecttheprojectors SSID.
 3.
Click Connect .
 Parent
topic:Wireless NetworkProjection
 Selecting
WirelessNetworkSettingsinMac OSX
 Before
connecting tothe projector, selectthecorrect wireless networkinMac OSX.
 1.
Click theAirPort icononthe menu baratthe topofthe screen.
 2.
Make sureAirPort isturned on,then doone ofthe following:
 •
Ifyour projector isset uponanexisting network (Advanced mode),selectthenetwork name
 (SSID).

•
Ifyour projector isconfigured forQuick mode, selecttheprojectors SSID.
 Parent
topic:Wireless NetworkProjection
 Setting
UpWireless NetworkSecurity
 You
cansetupsecurity foryour projector touse onthe wireless network. Setupone ofthe following
 security
optionstomatch thesettings usedonyour network:
 •
WPA/WPA2-PSK security(Advanced connection mode)
 •
WPA2-PSK security(Quickconnection mode)
 Note:
Check withyour network administrator forguidance onentering thecorrect information.
 1.
Press theMenu button.
 2.
Select theNetwork menuandpress Enter.
 3.
Select Network Configuration andpress Enter.
 43 
						

							

4.
Select theSecurity menuandpress Enter.
 5.
Select thesecurity settingsasnecessary tomatch yournetwork settings.
 6.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 Wireless
SecurityMenuSettings
 Parent
topic:Wireless NetworkProjection
 Related
references
 Projector
NetworkSettings-Network Menu
 Wireless
SecurityMenuSettings
 Settings
onthe Security menuletyou select thetype ofsecurity andsecurity settingsthatmatch the
 network
youareconnecting theprojector to.
 Setting
 Options
 Description

Security
 WPA2-PSK
andWPA types
 Selects
thetype ofsecurity used
 available
 on
the wireless network
 Passphrase
 Various
keysfrom8to 32
 For
WPA orWPA2-PSK security,
 characters
 selects
thepre-shared keyused
 on
the network
 Parent
topic:Setting UpWireless NetworkSecurity
 44 
						

							

Using
BasicProjector Features
 Follow
theinstructions inthese sections touse your projectors basicfeatures.
 Turning
Onthe Projector
 Turning
Offthe Projector
 Viewing
3DImages
 Selecting
theLanguage forthe Projector Menus
 Adjusting
theImage Height
 Image
Shape
 Resizing
theImage WiththeZoom Ring
 Focusing
theImage UsingtheFocus Ring
 Remote
ControlOperation
 Selecting
anImage Source
 Projection
Modes
 Image
Aspect Ratio
 Color
Mode
 Controlling
theVolume withtheVolume Buttons
 Projecting
aSlide Show
 Turning
Onthe Projector
 Turn
onthe computer orvideo equipment youwant touse before youturn onthe projector soitcan
 display
theimage source.
 45 
						

							

1.
Open theprojectors lenscover.
 2.
Connect thepower cordtothe projectors powerinlet.
 3.
Plug thepower cordintoanelectrical outlet.
 Note:
WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
 The
projectors powerlightturns blue.Thisindicates thattheprojector isreceiving power.
 4.
Press thepower button onthe projector orthe remote controltoturn onthe projector.
 46   
						

							

The
projector beepsandtheStatus lightflashes blueasthe projector warmsup.Once theprojector
 is
warmed up,theStatus lightstops flashing andturns blue.
 Warning:
Neverlookintotheprojector lenswhen thelamp ison. This candamage youreyes andis
 especially
dangerous forchildren.
 If
you donot see aprojected imagerightaway, trythe following:
 •
Verify thelens cover isopen allthe way.
 •
Turn onthe connected computerorvideo device.
 •
Insert aDVD orother video media andpress theplay button, ifnecessary.
 •
Press thebutton forthe video source onthe remote control.
 Parent
topic:UsingBasicProjector Features
 Related
references
 Projector
SetupSettings -Extended Menu
 Turning
Offthe Projector
 Before
turning offthe projector, shutdown anycomputer connected toitso you canseethecomputer
 display
duringshutdown.
 Note:
Turnoffthis product whennotinuse toprolong thelifeofthe projector. Lamplifewill vary
 depending
uponmode selected, environmental conditions,andusage. Brightness decreasesovertime.
 Note:
When usingtheA/V Mute feature, theprojector lampisstill on.Toturn offthe lamp, turnoffthe
 projector.

1.
Press thepower button onthe projector orthe remote control.
 The
projector displaysashutdown confirmation screen.
 47 
						

							

2.
Press thepower button again.(Toleave iton, press anyother button.)
 The
projector beepstwice,thelamp turns off,and theStatus lightturns off.
 Note:
WithEpsons InstantOfftechnology, thereisno cool-down periodsoyou canpack upthe
 projector
fortransport rightaway (ifnecessary).
 Caution:
Donot turn theprojector onimmediately afterturning itoff. Turning theprojector onand off
 frequently
mayshorten thelifeofthe lamp.
 3.
Totransport orstore theprojector, makesuretheStatus lightisoff, then unplug thepower cord.
 Caution:
Toavoid damaging theprojector orlamp, never unplug thepower cordwhen theStatus
 light
ison orflashing.
 4.
Close theprojectors lenscover.
 48   
						

							

Parent
topic:UsingBasicProjector Features
 Viewing
3DImages
 You
canview 3Dimages usingyourprojector. Viewing3Dimages requires a3D-compatible video
 device
andapair ofEpson RF3Dglasses (notincluded withyour projector).
 You
canpurchase EpsonRF3Dglasses fromanEpson authorized reseller.Tofind thenearest reseller,
 call
800-GO-EPSON (800-463-7766).Oryou canpurchase onlineatepsonstore.com (U.S.sales) or
 epson.ca
(Canadian sales).
 1.
Connect a3D-compatible videodevice tothe projector usingacompatible HDMIcable.
 2.
Turn onthe video device, thenturnonthe projector.
 3.
Begin playback fromthevideo device.
 Note:
Makesureyousetthe video device toplay content in3D mode.
 4.
Press the2D/3D buttononthe remote controltoactivate 3Dmode, ifnecessary.
 5.
Slide thepower switch onthe 3Dglasses tothe Onposition.
 49   
						

							

6.
Putonthe 3Dglasses. Ifyou donot see a3D image, pairtheglasses withtheprojector.
 Note:
Ifyou change thevideo source oryou arenotwithin range ofyour projector, theglasses enter
 standby
modeandtheindicator lightflashes green.Slidethepower switch onthe glasses tothe Off
 position
andthen back tothe Onposition toresume 3Dviewing.
 Pairing
the3DGlasses withtheProjector
 Charging
the3DGlasses
 3D
Viewing Range
 Parent
topic:UsingBasicProjector Features
 Related
tasks
 Connecting
toan HDMI Video Source
 Connecting
toaComputer forHDMI Video andAudio
 Pairing
the3DGlasses withtheProjector
 Pair
theglasses withtheprojector toestablish communication betweenthemfor3D viewing.
 1.
Turn onthe projector.
 2.
Settheimage source toHDMI.
 3.
Project a3D image.
 4.
Slide thepower switch onthe 3Dglasses tothe Onposition.
 50