Epson Projector PowerLite 92 User Manual

3.
Insert thebatteries withthe+and –ends facing asshown.
 4.
Close thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Projector Maintenance
 Related
references
 Remote
ControlOperation
 141   

Transporting
theProjector
 The
projector containsprecision parts,someofwhich areglass. Follow theseguidelines totransport or
 ship
theprojector safely:
 •
Close thelens cover toprotect thelens.
 •
Remove anyequipment connectedtothe projector.
 •
Use acarrying casetohand-carry theprojector.
 •
When transporting theprojector along distance oras checked luggage, placeitin acarrying case.
 Then
packthecase inafirm boxwith cushioning arounditand mark thebox Fragile.
 •
When shipping theprojector forrepairs,...

Solving
Problems
 Check
thesolutions inthese sections ifyou have anyproblems usingtheprojector.
 Projection
ProblemTips
 Projector
LightStatus
 Using
theProjector HelpDisplays
 Solving
ImageorSound Problems
 Solving
Projector orRemote ControlOperation Problems
 Solutions
WhenNetwork AlertE-Mails areNot Received
 Where
toGet Help
 Projection
ProblemTips
 If
the projector isnot working properly, tryturning itoff and unplugging it.Then plugitback inand turn it
 on.

If
this does notsolve theproblem,...

1
 Power
light
 2
 Lamp
light
 3
 Temperature
light
 Power
light
 Lamp
light
 Temperature
 Status
andsolution
 light

Green
 Off
 Off
 Normal
operation.
 Flashing
green
 Off
 Off
 Warming
up.Wait foranimage toappear.
 Orange
 Off
 Off
 Standby
orsleep mode.
 Flashing
orange
 Off
 Off
 Preparing
networkmonitoring orshutting down.
 (Wait
forthe light toremain orange before
 unplugging
theprojector.)
 Flashing
red
 Off
 Flashing
orange
 Projector
istoo hot.
 •
Make surethatthevents andairfilter arenot...

Power
light
 Lamp
light
 Temperature
 Status
andsolution
 light

Red
 Off
 Red
 Projector
hasoverheated andturned off.Leave it
 turned
offtocool down forfive minutes.
 •
Make surethatthevents andairfilter arenot
 clogged
withdust orobstructed bynearby
 objects.

•
Clean orreplace theairfilter.
 •
Ifoperating theprojector athigh altitude, turnon
 High
Altitude Mode.
 •
Ifthe problem persists, unplugtheprojector and
 contact
Epsonforhelp.
 Red
 Flashing
red
 Off
 Lamp
hasaproblem.
 •
Check tosee ifthe...

Related
references
 Projector
SetupSettings -Extended Menu
 Where
toGet Help
 Related
tasks
 Cleaning
theAirFilter andVents
 Replacing
theAirFilter
 Replacing
theLamp
 Using
theProjector HelpDisplays
 You
candisplay information tohelp yousolve common problems usingtheprojectors Helpsystem.
 1.
Turn onthe projector.
 2.
Press theHelp button onthe projector orthe remote control.
 You
seetheHelp menu.
 3.
Use theupand down arrow buttons tohighlight theproblem youwant tosolve.
 4.
Press Entertoview...

Solutions
WhentheImage Contains NoiseorStatic
 Solutions
WhentheImage isFuzzy orBlurry
 Solutions
WhentheImage Brightness orColors areIncorrect
 Solutions
toSound Problems
 Solutions
toMicrophone Problems
 Parent
topic:Solving Problems
 Solutions
WhenNoImage Appears
 If
no image appears, trythe following solutions:
 •
Make surethelens cover isopen oroff.
 •
Press theA/V Mute button onthe remote controltosee ifthe image wastemporarily turnedoff.
 •
Make sureallnecessary cablesaresecurely connected...

Related
tasks
 Unlocking
theProjector s Buttons
 Solutions
WhenImage isIncorrect UsingtheUSB Display Function
 If
no image appears orifthe image appears incorrectly usingtheUSB Display function, trythe following
 solutions:

•
Press theUSB button onthe remote control.
 •
Make suretheUSB Display software hasinstalled correctly. Installitmanually ifnecessary.
 •
Make suretheUSB Type Bsetting inthe Extended menuisset toUSB Display ,if available.
 •
With MacOSX,select theUSB Display iconinthe Dock orfrom...

Displaying
FromaPC Laptop
 If
you seetheNo Signal message whenyoudisplay fromaPC laptop, youneed toset upthe laptop to
 display
onanexternal monitor.
 1.
Hold down thelaptops Fnkey and press thekey labelled withamonitor iconorCRT/LCD .(See
 your
laptop manual fordetails.) Waitafew seconds foranimage toappear.
 2.
Todisplay onboth thelaptops monitorandtheprojector, trypressing thesame keysagain.
 3.
Ifthe same image isnot displayed bythe laptop andprojector, checktheWindows Displayutilityto
 make...

Solutions
WhenOnlyaPartial ImageAppears
 If
only apartial computer imageappears, trythe following solutions:
 •
Press theAuto button onthe remote controltooptimize theimage signal.
 •
Try adjusting theimage position usingthePosition menusetting.
 •
Press theAspect buttononthe remote controltoselect adifferent imageaspect ratio.
 •
Ifyou zoomed intoorout ofthe image usingtheE-Zoom buttons,presstheEsc button twicetoreturn
 to
afull display.
 •
Check yourcomputer displaysettings todisable dualdisplay...