Epson Projector Z8150NL User Manual

Functions for Enhancing Projection
41
B
Move the Pointer icon ( ).
q
You can choose from three different kinds of Pointer icon ( ,  , or  ) 
in Settings - Pointer Shape from the configuration menu.
sp.65
Enlarging Part of the Image (E-Zoom)
This is useful when you want to expand images to see them in greater 
detail, such as graphs and tables.Procedure
A
Start E-Zoom.
B
Move the ( ) to the area of the image that you want to 
enlarge.
Remote Control
Remote Control
Remote Control 

Functions for Enhancing Projection
42
C
Enlarge.
Each time the button is pressed, the area is expanded. You can ex-
pand quickly by holding the button down.
You can reduce the enlarged image by pressing the [x] button.
Press the [Esc] button to cancel.
q
•The enlargement ratio appears on the screen. The selected area can be 
enlarged between 1 to 4 times in 25 incremental steps.
•Use the [h] button to scroll through the enlarged image.
•E-Zoom is canceled when performing some functions such as keystone...

Saving a User's Logo
43
Saving a User's Logo
You can save the image that is currently being projected as a User's Logo.
The saved user's logo can be used as the display image when there is no 
video signal input or during starting up.
q
Once a User's Logo has been saved, the logo cannot be returned to the 
factory default.
ProcedureA
Project the image you want to use as the User's Logo, and 
then press the [Menu] button.
B
Select Extended - "User's Logo" from the...

Saving a User's Logo
44
D
Move the box to select the part of the image to use as the 
User's Logo.
q
Your User’s Logo image can have a resolution up to 400^ 300.
E
When "Select this image?" is displayed, select "Yes".
F
Select the zoom factor from the zoom setting screen.
400% is displayed only when using PowerLite Pro 
Z8450WUNL/Z8455WUNL.
G
When the message "Save this image as the User's Logo?" is 
displayed, select "Yes".
The image is saved. After the image...

Security Functions
45
Security Functions
The projector has the following enhanced security functions.
•Password Protect
You can limit who can use the projector.
•Control Panel Lock/Lens Operation Lock/Remote control button lock
You can prevent people changing the settings on the projector without 
permission. sp.47
•Theft-Deterrent Lock
The projector is equipped with various types of theft-deterrent security 
devices. sp.50
Managing Users (Password Protect)
When Password Protect is activated, people who...

Security Functions
46
q
•If Password Protect is already activated, you must enter the password.
If the password is entered correctly, the Password Protect setting menu is 
displayed. s"Entering the Password" p.46
•When the password is set, stick the Password protect sticker in a visible 
position on the projector as a further theft-deterrent.
B
Turn on "Power On Protect".
C
Turn on "User's Logo Protect".
D
Turn on "Network Protect".
E
Set the Password.
Entering the...

Security Functions
47
Caution
•If an incorrect password is entered three times in succession, the message "The 
projector's operation will be locked." is displayed for about five minutes, and then 
the projector switches to standby mode. If this happens, disconnect the power plug 
from the electrical outlet and then reinsert it and turn the projector's power back on. 
The projector displays the Password entry screen again so that you can enter the 
correct password.
•If you have forgotten...

Security Functions
48
B
Select either "Full Lock" or "Partial Lock" according to your 
purpose.
C
Select "Yes" when the confirmation message is displayed.
The control panel buttons are locked according to the setting you 
chose.
q
You can release the control panel lock by one of the following two methods.
•From the remote control, select Off in Settings - Control Panel Lock from 
the configuration menu. sp.65
•Press and hold down the [Enter] button on the control panel for about...

Security Functions
49
B
Select "On".
The buttons related to the lens operation are locked according to 
the setting you chose.
Remote control button lock
This function locks the following buttons on the remote control.Procedure
Each time the [Help] button is pressed for at least 5 seconds, the remote 
control button lock turns on or off.
Remote Control
Remote Control 

Security Functions
50
q
Even if the remote control button lock is on, the following operations are 
possible.
•Resetting the Remote Receiver setting to it’s default
•Entering numbers using the [Num] button and the numeric buttons
Theft-Deterrent Lock
As the projector is often setup on ceiling mounts and left in rooms 
unattended, the projector includes the following security devices to 
prevent someone from taking the projector.
•Security slot
The Security slot is compatible with the Microsaver Security...