Epson WorkForce 610 User Manual

Setting Up Fax Features21
5. Select Create and press OK. You see the list of 
available entries.
Note: 
To edit or delete an entry from an existing list, select 
Edit or Delete instead.
6. Select or type the number of the speed dial entry 
you want to add, then press OK.
7. Use the numeric keypad to enter the phone number (see page 19). Press OK.
8. Use the numeric keypad to enter a name to identify the speed dial entry (see 
page 19), then press OK. You return to the Speed Dial Setup menu.
9. If you...

22Faxing a Document or Photo
8. Pressuord to highlight a speed dial entry, then press r to add it to the group 
dial list.
Note: 
To remove a speed dial entry that you selected, pressuord to highlight the 
entry, then press l.
9. Repeat step 8 to add additional speed dial entries to the group.
10. When you’re finished, press OK.
11. If you want to create another group dial list, repeat steps 5 through 10.
Printing Your Speed Dial or Group Dial List
To print your speed dial or group dial list, follow...

Sending a Fax23
4. Pressuord to select Color or B&W. 
Note: 
If the recipient’s fax machine prints only in black and white, your fax is 
automatically sent in black and white even if you select Color.
5. Press OK, if desired, to see a summary of your fax transmission settings.
6. Press xStart to send your fax. 
To cancel faxing, press yStop/Clear Settings.
If you are scanning with the Automatic Document Feeder, your document is 
automatically scanned and faxed.
If you placed your document on the scanner...

24Faxing a Document or Photo
■To redial the last fax number you used, press Redial/Pause. The last fax 
number is displayed on the screen.
■To specify a different time to send your fax, press Menu, press l or r to select 
Fax Send Settings, press OK, and select Send Fax Later. Then press r and 
select On. (You cannot send or receive any faxes until the delayed fax has been 
sent or cancelled.)
■Press Menu and select Poll to Receive to receive a fax from another fax 
machine to which you have dialed (such...

Printing From a Memory Card25
Printing From a Memory Card
Your product lets you print photos directly from a memory card.
See the online Epson Information Center for instructions on copying memory card 
files between your product and a computer; printing photos by date; printing 
photos from a slideshow; printing photos directly from your camera; and printing 
photos pre-selected in your camera (DPOF™ or Digital Print Order Format).
Inserting the Card
1. Insert the card into the correct slot, as shown....

26Printing From a Memory Card
The image files on your card must meet these requirements:
2. To remove the card, make sure the memory card access light is not flashing, 
then pull the card straight out of its slot.
Caution: 
Do not remove the card or turn off the product while the memory card access light 
is flashing; you may lose data on the card.
Selecting Photos From the Screen
1. Load Epson photo paper. See page 7 for a list.
2. Press the Home button until Print Photos is 
selected, then press OK.
3....

Inserting the Card27
8. When you’re done selecting and cropping photos, 
press OK. You see the Print Preview screen:
9. To change any of the print settings displayed on the 
screen, press Menu, press l or r to select Print 
Settings, press OK, and select your settings. After 
you finish selecting your settings, press OK again.
10. To change any of the photo adjustments displayed on the screen, press Menu, 
l or r to select Photo Adjustments, press OK, and select your settings. After 
you finish selecting...

28Printing From Your Computer
Printing From Your Computer
This section describes the basic steps for printing a photo or document stored on 
your Windows® or Macintosh® computer. For detailed instructions on printing, 
see the online Epson Information Center.
Before you start, make sure you’ve installed your printer software and connected 
the product to your computer as described on the Start Here sheet. 
Tip: 
It’s a good idea to check for updates to your product’s software. See page 44 for...

Printing in Windows29
4. On the Main tab, select the basic print settings. Make sure you choose the 
correct paper Type setting for the paper you are using (see page 34).
Note: 
For quick access to the most common settings, click the Shortcuts tab and select 
one of the presets. You can create your own presets by clicking the Save Settings 
button on the Advanced tab. For details, see your online Epson Information 
Center.
5. To improve the color, contrast, and sharpness of photos, select Fix Photo.
6....

30Printing From Your Computer
10. Click OK or Print to start printing. This window appears and shows the 
progress of your print job.
Printing With a Macintosh
See the section below for your Mac® operating system.
Mac OS  X 10.5
1. Open a photo or document in an application.
2. Open the File menu and select Print.
3. Select your product as the Printer setting.
4. Click d to expand the Print window, if necessary.
Cancel 
printing
Check ink cartridge status
®
Click to expand
Select EPSON WorkForce 610