Home > Forster > Firearms accessories > Forster Bench Rest Die Instructions Manual

Forster Bench Rest Die Instructions Manual

Add to Favourites
    Download as PDF

    View the Forster Bench Rest Die Instructions Manual for free. All the Forster manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 PREPARATION Note: Half-inch yellow square tab is a anti-rust agent--keep with dies. We suggest that you clean the dies’ inside surfaces using a patch saturated with gun-cleaning solvent. This will help to prevent scratching of your dies and cases. Clean and inspect all cases before resizing. Dispose of split or separated cases. Check the case length and trim to length if necessary. Chamfer the sharp corners of trimmed cases with a Forster Deburring Tool. CASERESIZING(SEEFIGUREA) With the shellholder at...
    Page 2 BENCH REST®SIZING DIE Figure C.When the cartridge case has been full length sized, our E-Z OUT Expander Ball is in its elevated position near the neck of the case. When the case is withdrawn from the die, most of the neck is still in the neck-sizing portion of the die. This tends to keep the axis of neck and case in alignment. Furthermore, you will scarcely feel the effort required to draw the expander through the case neck. The neck expanding, in this design, is done at a point where you have the full...
    Start reading Forster Bench Rest Die Instructions Manual

    Related Manuals for Forster Bench Rest Die Instructions Manual

    All Forster manuals