Home > Forster > Firearms accessories > Forster Out Side Neck Turner Accessory Instructions Manual

Forster Out Side Neck Turner Accessory Instructions Manual

Add to Favourites
    Download as PDF

    View the Forster Out Side Neck Turner Accessory Instructions Manual for free. All the Forster manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 When a loaded round no longer has a clearance of .002” to .003” between the neck and the chamber of the gun, it becomes necessary to reduce the thickness of the neck wall to reestablish the original clearance. This can be accomplished with the conventional inside neck reamer, which will establish the required clearance but not necessarily produce neck walls of even thickness. This prompted the development of the Outside Neck Turning accessory, which will produce neck walls of even thickness and desired...
    Page 2 NECKTURNINGINSTRUCTIONS Select the proper collet for the case you will turn. Remove the collet screw from the collet housing. Apply a small amount of grease to the front face, tapered portion and base of the collet. Insert the collet into the collet screw. Replace the collet and the collet screw. With tension on the collet released, insert the base of the case to be trimmed into the collet. Move the pilot about 1/2” into the neck of the case. Hold the case firmly against the shoulder of the collet with...
    Start reading Forster Out Side Neck Turner Accessory Instructions Manual

    Related Manuals for Forster Out Side Neck Turner Accessory Instructions Manual

    All Forster manuals