Fujifilm Camera Finepix Xp200 Owners Manual

11 First  Steps
Inserting the Battery and a Memory Card
    Removing the Battery and Memory Card  Removing the Battery and Memory Card
Before removing the battery or memory card,  turn the camera off and open the 
battery-chamber cover.
To remove the battery, press the battery latch to the side, and 
slide the battery out of the camera as shown.
Battery latch
To remove the memory card, press it in and release it slowly.  
The card can then be removed by hand.  When a memory card 
is removed, the card...

12 First  Steps
Inserting the Battery and a Memory Card
 
■  Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved 
for use in the camera.  A complete list of approved memory cards is available 
at  http://www.fujifilm.com/support/digital_cameras/compatibility/ .  Operation 
is not guaranteed with other cards.  The camera can not be used with  xD-
Picture Cards or MultiMediaCard (MMC) devices.
  QQMemory CardsMemory Cards
•  Do not turn the camera off or remove...

13 First  Steps
Inserting the Battery and a Memory Card
•  The data in internal memory may be erased or corrupted when the camera is repaired.  Please note that the repairer will be able to view pictures in internal memory.
• Formatting a memory card or internal memory in the camera creates a folder in  which pictures are stored.  Do not rename or delete this folder or use a computer or 
other device to edit, delete, or rename image files.  Always use the camera to delete 
pictures from memory cards and...

14 First  Steps
 Charging the Battery Charging the Battery
The battery is not charged at shipment.  Charge the battery before use.  The 
camera charges the battery internally.
   1  Attach the plug adapter to the AC power adapter.Attach the plug adapter as shown, making 
sure that it is fully inserted and clicks into 
place on the AC power adapter terminals.
 
Q The plug adapter is exclusively for use with the 
supplied AC power adapter.  Do not use it with 
other devices.AC power adapter 
Plug adapter...

15 First  Steps
Charging the Battery
    The Self-timer Lamp  The Self-timer Lamp
The self-timer lamp shows battery charge status as follows:
Self-timer lampSelf-timer lampBattery statusBattery statusActionAction
OnOnBattery charging.Battery charging.——
BlinksBlinksBattery fault.Battery fault.See page See page 103..
OffOff
Charging complete.Charging complete.——
 Can not charge. Can not charge. Unplug the AC power adapter from the power outlet 
and reinsert the battery in the correct orientation 
(P...

16 First  Steps
Charging the Battery
  Charging via a computer  Charging via a computer
The battery can be charged by connecting the camera to a computer.
Turn the camera off and connect the supplied 
USB cable as shown, making sure the 
connectors are fully inserted.  Connect the 
camera directly to the computer; do not use a 
USB hub or keyboard.
 
Q If the camera is turned on, charging is not available.
 
Q If the computer goes into sleep mode while charging, charging will stop.  To 
continue...

17 First  Steps
 Turning the Camera on and Off Turning the Camera on and Off
Shooting ModeShooting Mode
Press the ON/OFF button to turn the 
camera on.
Press ON/OFF again to turn the camera 
off.
  RRSwitching to Playback ModeSwitching to Playback Mode
Press the a button to start playback.  
Press the shutter button halfway to return 
to shooting mode.
 
Q You may be prompted to confirm 
that the battery-chamber cover is 
locked, but this does not indicate a 
malfunction.
Playback ModePlayback Mode
To...

18 First  Steps
Turning the Camera on and Off
 
Q Fingerprints and other marks on the protective glass covering the lens can affect 
pictures.  Keep the glass clean.
 
Q The 
ON/OFF button does not completely end the supply of power to the camera.
  RRAuto Power OffAuto Power Off
The camera will turn off automatically if no operations are performed for the length of 
time selected for M  AUTO POWER OFF (P 94).  To turn the camera on, use the  ON/OFF 
button or press the a button for about a second. 

19 First  Steps
 Basic Setup Basic  Setup
A language-selection dialog is displayed the first time the camera is turned 
on.  Set up the camera as described below (you can reset the clock or change 
languages at any time using the F DATE/TIME or L a options in 
the setup menu; for information on displaying the setup menu, see page 89).
 1  Highlight a language and press MENU/OK.
 
R  Press  DISP/BACK to skip the current step.  Any steps you skip 
will be displayed the next time the camera is turned on....

20
 Basic Photography and Playback Basic Photography and Playback
 Taking Pictures in  Taking Pictures in QQ (Scene Recognition) Mode (Scene Recognition) Mode
This section describes how to take pictures in QQ (scene recognitionscene recognition) mode.   
The camera automatically analyzes the composition and adjusts settings 
appropriately.
 1  Turn the camera on. Press the ON/OFF button to turn the camera on.  
Q shooting indicators will be displayed.
  The  The oo Icon Icon
This icon indicates that the...