Fujifilm Camera Fujifilm Camera X E2 Owners Manual

5
Before You Begin
Parts of the Camera
 Camera Displays Camera  Displays
The following types of indicator may be displayed during shooting and playback.  In the description 
that follows, all available indicators are shown for illustrative purposes; the indicators actually displayed 
vary with camera settings.  Note that the LCD monitor and electronic viewfi nder have diff erent aspect 
ratios.
 
■  Shooting:  Viewfi  nder/LCD  Monitor
F100
P2000F5 . 62000.1 0.5 1.0 1.5 2.0 3.0 5.0 10
+1
11
12
2
3 300...

6
Parts of the Camera
 
■  Shooting: LCD Monitor
20001F5.6
000100
P200
F12
210
+13
3
AA Flash mode ..................................................... 30
Flash compensation ........................................ 78
BBMacro (close-up) mode ................................... 32CCMetering ......................................................... 54DDContinuous mode ............................................ 57EESilent mode indicator ...................................... 88FFNumber of available...

7
Before You Begin
Parts of the LensParts of the Lens
AALens hoodBBMounting marksCCFocus ringDDZoom ringEEAperture ringFFO.I.S. switchGGAperture mode switchHH Lens signal contactsIIFront lens capJJRear lens cap
Removing the CapsRemoving the Caps
Remove the caps as shown.
 
Q Lens caps may diff  er from those shown.
Attaching the HoodAttaching the Hood
When attached, lens hoods reduce glare and pro-
tect the front lens element.
LensesLenses
The camera can be used with lenses for the FUJIFILM X-mount. 

8
Lenses
Lenses with Aperture RingsLenses with Aperture Rings
At settings other than A, you 
can adjust aperture by rotating 
the lens aperture ring (expo-
sure modes A and M).
Aperture ring
A161185.642.8
A161185.64
  The Aperture Mode Switch  The Aperture Mode Switch
If the lens has an aperture mode 
switch, aperture can be adjusted 
manually by sliding the switch 
to  Z and rotating the aperture 
ring.Aperture ring
Aperture mode switch
Lenses with No Aperture RingsLenses with No Aperture Rings
The...

9
Before You Begin
Lenses
 Lenses with O.I.S. Switches Lenses with O.I.S. Switches
If the lens supports optical im-
age stabilization (O.I.S.), the im-
age stabilization mode can be 
chosen in the camera menus.  
To activate image stabilization, 
slide the O.I.S. switch to ON.
O.I.S. switch
Manual Focus LensesManual Focus Lenses
Slide the focus ring to the front for 
autofocus.
For manual focus, slide the focus ring 
to the back and rotate it while check-
ing the results in the camera display. 
The focus...

10
First StepsFirst Steps
 Attaching the Strap Attaching the Strap
Attach the strap clips to the camera and then attach the strap.
 1  Open a strap clip.Use the clip attaching tool to open a strap clip, 
making sure that the tool and clip are in the 
orientations shown.
 
Q Keep the tool in a safe place.  You will need it to 
open the strap clips when removing the strap.
 2  Place the strap clip on an eyelet.
Hook the strap eyelet in the clip opening.  Re-
move the tool, using the other hand to keep 
the...

11
First Steps
Attaching the Strap
 5  Insert the strap.Insert the strap through a protective cover 
and strap clip. 6  Fasten the strap.Fasten the strap as shown.  Repeat Steps 5–6 
for the second eyelet.
 
Q To avoid dropping the camera, be sure the strap is 
correctly secured. 

12
 Attaching a Lens Attaching a Lens
Lenses attach as described below.
 
Q Care is required to prevent dust entering the camera while attaching and removing lenses.
 1  Remove the body and rear caps.
Remove the body cap from the camera and 
the rear cap from the lens.
 
Q Do not touch the camera’s internal parts.
 2  Attach the lens.
Place the lens on mount, keeping the marks 
on the lens and camera aligned, and then ro-
tate the lens until it clicks into place.
 
Q Do not press the lens release button...

13
First Steps
 Charging the Battery Charging the Battery
The battery is not charged at shipment.  Before use, charge the battery in the supplied battery charger.
 1  Place the battery in the charger.Place the battery in the supplied battery char-
ger as shown.
Battery charger
Battery
Charge lamp
Arrow
The camera uses an NP-W126 rechargeable bat-
tery.
 
R The supplied AC cord is for use exclusively with 
the supplied battery charger. Do not use the 
supplied charger with other cords or the sup-
plied...

14
 Inserting the Battery and a Memory Card Inserting the Battery and a Memory Card
The camera has no internal memory; instead, pictures are stored on optional SD, SDHC, and SDXC 
memory cards (sold separately).  After charging the battery, insert the battery and memory card as 
described below.
   1  Open the battery-chamber cover.Slide the battery-chamber latch as shown and 
open the battery-chamber cover.
 
Q Do not open the battery-chamber cover when 
the camera is on.  Failure to observe this...