Fujifilm Camera Fujifilm Camera X E2 Owners Manual

15
First Steps
Inserting the Battery and a Memory Card
   3  Insert the memory card.Holding the memory 
card in the orientation 
shown at right, slide 
it in until it clicks into 
place at the back of 
the slot.
Click
 
Q  Be sure card is in the correct orientation; do not 
insert at an angle or use force.
 
Q  SD/SDHC/SDXC  memo-
ry cards can be locked, 
making it impossible to 
format the card or to 
record or delete images.  
Before inserting a memory card, slide the write-
protect switch to the...

16
Inserting the Battery and a Memory Card
    Removing the Battery and Memory Card  Removing the Battery and Memory Card
Before removing the battery or memory card,  turn 
the camera off   and open the battery-chamber cover.
To remove the battery, press 
the battery latch to the side, 
and slide the battery out of 
the camera as shown.
Battery latch
To remove the memory card, 
press it in and release it slowly.  
The card can then be removed 
by hand.  When a memory card 
is removed, the card could be...

17
First Steps
Inserting the Battery and a Memory Card
 
■  Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the cam-
era.  A complete list of approved memory cards is available at  http://www.fujifilm.com/support/digital_
cameras/compatibility/.  Operation is not guaranteed with other cards.  The camera can not be used 
with xD-Picture Cards or MultiMediaCard (MMC) devices.
  QQMemory CardsMemory Cards
•  Do not turn the camera off  or remove the...

18
 Turning the Camera on and Off  Turning the Camera on and Off 
Rotate the ON/OFF switch to  ON to turn the camera on.  Select  OFF to turn 
the camera off  .
 
R Press the a button to start playback.  Press the shutter button halfway to 
return to shooting mode.
 
R The camera will turn off    automatically if no operations are performed for the 
length of time selected for  Z POWER MANAGEMENT > AUTO POWER OFF  (P 91).  To reactivate the camera 
after it has turned off   automatically, press the...

19
First Steps
 Basic Setup Basic  Setup
A language-selection dialog is displayed the fi rst time the camera is turned on.  Set up the camera as 
described below (you can reset the clock or change languages at any time using the F DATE/TIME 
or  Q  a options in the setup menu; for information on displaying the setup menu, see page 88).
 1  Choose a language.
START MENU
NOSETENGLISH
FRANCAIS
DEUTSCH
Highlight a language and press MENU/OK.
 
R Press  DISP/BACK to skip the current step.  Any steps you skip...

20
 Choosing a Display Choosing a Display
The camera is equipped with an electronic viewfi nder (EVF) and an LCD monitor (LCD).  Follow the 
steps below to choose a display.
 1  Display the setup menu.1.1 Press  MENU/OK to display the 
menu for the current mode.
1.2  Press the selector left to highlight  the tab for the current menu.
1.3 Press the selector down to high-light the setup menu tab con-
taining u  EVF/LCD SETTING.
1.4 Press the selector right to place 
the cursor in the setup menu.
 2 Select...

21
First Steps
Choosing a Display
 Focusing the Viewfi  nder Focusing the Viewfi  nder
The camera is equipped with diopter adjustment 
in the range –4 to +2 m
–1 to accommodate indi-
vidual diff  erences in vision.  Rotate the diopter 
adjustment control until the viewfi nder display is 
in sharp focus.
Diopter adjustment control
Adjusting Display BrightnessAdjusting Display Brightness
The brightness of the viewfi  nder and LCD monitor 
can be adjusted using the A  SCREEN SET-UP > 
EVF/LCD BRIGHTNESS...

22
 The  The DISP/BACKDISP/BACK Button Button
The DISP/BACK button controls the display of indicators in the viewfi nder and LCD monitor. 
■ Viewfi nder: Shooting
Standard display Information off 
P2002000
F5.60.1 0.5 1.0 1.5 2.0 3.0 5.0 10
11
12
2
3 300
P2002000
F5.6
F
0.1 0.5 1.0 1.5 2.0 3.0 5.0 10
100
11
12
2
3 300
Custom display
 
■ LCD Monitor: Shooting
Detailed display Standard display
20001F5.6
000 100
P200
F12
2103
3
P2002000
F5.60.1 0.5 1.0 1.5 2.0 3.0 5.0 10
11
12
2
3 300
P2002000
F5.6
F
0.1...

23
First Steps
The DISP/BACK Button
 
■ Viewfi  nder/LCD Monitor: Playback
Indicators displayed Indicators hidden FavoritesPhoto information
1 / 1000 F4 . 5-12/320012 / 31 / 2050 10 : 00  AM
3:2 F
100-0001100-0001
3
12 / 31 / 205012 / 31 / 205010 : 00  AM10 : 00  AM
3:2 FISO 200
1/1000
12 / 31 / 2050
OFF:
: :
F4.5
10:00
  AM
100-0001
-12/3:
    Histograms Histograms
Histograms show the distribution of tones in the im-
age.    Brightness is shown by the horizontal axis, the 
number of pixels by the...

24
Basic Photography and PlaybackBasic Photography and Playback
Taking PhotographsTaking Photographs
This section describes how to take pictures using program AE (mode P).  For information on S, A, and 
M modes, see page 37.
 1  Select program AE. Set shutter speed and aperture to A.  P will ap-
pear in the display.
 
R Image stabilization (P 9) is recommended.
Aperture mode switch
P2002000
F5.6
11
12
2
3 300
    The Q Button  The Q Button
The  Q button can be used to view and adjust 
camera settings (P...