Fujifilm Camera X T1 Owners Manual
Have a look at the manual Fujifilm Camera X T1 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 17 Fujifilm manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
95 Menus Factory DefaultsFactory Defaults The factory default settings for the options in the shooting and setup menus are listed below. These settings can be restored using the R RESET option in the setup menu (P 89). ■ Shooting Menu MenuMenuDefaultDefault kk BKT/Adv. SETTING BKT SELECT O AE BKT Adv. FILTER SELECT G TOY CAMERA G AUTOFOCUS SETTING MACRO OFF RELEASE/FOCUS PRIORITYRELEASE/FOCUS PRIORITY• AF-S PRIORITY SELECTION : RELEASE • AF-C PRIORITY SELECTION: RELEASE INSTANT AF SETTINGINSTANT AF SETTING AF-SAF MODEAF MODEt AREAFACE DETECTIONFACE DETECTION OFFPRE-AFPRE-AFOFFAF ILLUMINATORAF ILLUMINATORON N ISO AUTO SETTING DEFAULT SENSITIVITY 200 MAX. SENSITIVITY 800 MIN. SHUTTER SPEED 1/60 O IMAGE SIZE O 3 : 2 T IMAGE QUALITY FINE U DYNAMIC RANGE V 100% P FILM SIMULATION c PROVIA/STANDARD B SELF-TIMER OFF D D WHITE BALANCE AUTOS f COLOR (0) MID q SHARPNESS (0) STANDARD r HIGHLIGHT TONE (0) STANDARD MenuMenuDefaultDefault s SHADOW TONE (0) STANDARD h NOISE REDUCTION (0) STANDARD K LONG EXPOSURE NR ON j LENS MODULATION OPTIMIZERON l MOUNT ADAPTOR SETTING LENS 5 (50mm) m SHOOT WITHOUT LENS OFF c MF ASSIST STANDARD v AE/AF-LOCK MODE AE&AF ON WHEN PRESSING d AF-LOCK MODE AF LOCK ONLY p FLASH MODE AUTO I FLASH COMPENSATION ±0 B RED EYE REMOVAL OFF W MOVIE SET-UP MOVIE MODE i 1920 × 1080 60 fps MIC LEVEL ADJUSTMENT 3 MIC/REMOTE RELEASE m MIC L IS MODE l CONTINUOUS e APERTURE SETTING AUTO + o MANUAL
96 Factory Defaults ■ Setup Menu MenuMenuDefaultDefault o SILENT MODE OFF b SOUND SET-UP OPERATION VOL. c PLAYBACK VOLUME 7 A SCREEN SET-UP IMAGE DISP. OFF EVF AUTOROTATE DISPLAYSEVF AUTOROTATE DISPLAYSON PREVIEW EXP. IN MANUAL MODE ON EVF/LCD BRIGHTNESS 0 FRAMING GUIDELINE F GRID 9 AUTOROTATE PB ON FOCUS CHECKFOCUS CHECKOFFFOCUS SCALE UNITSFOCUS SCALE UNITSMETERSDISP. CUSTOM SETTINGDISP. CUSTOM SETTINGAll options selected F FUNCTION (Fn) SETTING Fn1 k BKT/Adv. SETTING Fn2 r WIRELESS COMMUNICATION Fn3 p MACRO Fn4 P FILM SIMULATION Fn5 D WHITE BALANCE Fn6 i FOCUS AREA e COMMAND DIAL SETTING Y S.S. X F N ISO DIAL SETTING • H1: 12800 • H2: 25600 I FOCUS RING X CW Z POWER MANAGEMENT AUTO POWER OFF 2 MIN HIGH PERFORMANCE OFF MenuMenuDefaultDefault V SENSOR CLEANING WHEN SWITCHED ON OFF WHEN SWITCHED OFF ON t SAVE DATA SET-UP FRAME NO. CONTINUOUS SAVE ORG IMAGE OFF J COLOR SPACE sRGB r WIRELESS SETTINGS RESIZE IMAGE FOR SMARTPHONE HH ON U GEOTAGGING SET-UP GEOTAGGING ON LOCATION INFO ON
97 Connections ConnectionsConnections Wireless Transfer Wireless Transfer Access wireless networks and connect to computers, smartphones, or tablets. For downloads and other information, visit http://fujifilm-dsc.com/wifi/. Wireless Connections: Smartphones Wireless Connections: Smartphones Install the “FUJIFILM Camera Remote” app on your smartphone to browse the images on the cam- era, download selected images, control the cam- era remotely, or copy location data to the camera. To connect to the smartphone, press the camera Wi-Fi button in playback mode. R You can also connect using the r WIRELESS COMMUNICATION options in the camera shooting and playback menu. To connect in shooting mode, assign WIRELESS COMMUNICATION to a function button (P 39). Wireless Connections: ComputersWireless Connections: Computers Once you have installed the “FUJIFILM PC AutoSave” application and confi gured your computer as a destination for the images copied from the cam- era, you can upload pictures from the camera us- ing the s PC AUTO SAVE option in the camera playback menu or by pressing and holding the Wi-Fi button in playback mode.
98 Viewing Pictures on a Computer Viewing Pictures on a Computer The supplied software can be used to copy pictures to a computer, where they can be stored, viewed, organized, and printed. Before proceeding, install the software as described below. Do NOT connect the camera to the computer until installation is complete. Windows: Installing MyFinePix Studio Windows: Installing MyFinePix Studio 1 Confi rm that the computer meets the following system requirements: Windows 8/Windows 7 (Service Pack 1) /Windows 8/Windows 7 (Service Pack 1) / Windows Vista (Service Pack 2) Windows Vista (Service Pack 2) 1 1Windows XP (Service Pack 3)Windows XP (Service Pack 3) 1 1 CPUCPU3 GHz Pentium 4 or better 3 GHz Pentium 4 or better (2.4(2.4 GHz Core 2 Duo or better GHz Core 2 Duo or better 22))2 GHz Pentium 4 or better 2 GHz Pentium 4 or better (2.4(2.4 GHz Core 2 Duo or better GHz Core 2 Duo or better 22)) RAMRAM1 GB or more1 GB or more512 MB or more (1512 MB or more (1 GB or more GB or more 22)) Free disk spaceFree disk space2 GB or more2 GB or more GPUGPUSupports DirectX 9 or later (recommended)Supports DirectX 9 or later (recommended)Supports DirectX 7 or later (required; performance Supports DirectX 7 or later (required; performance not guaranteed with other GPUs)not guaranteed with other GPUs) VideoVideo 1024 × 768 pixels or more with 24-bit color or better OtherOther • Built-in USB port recommended. Operation is not guaranteed with other USB ports. • .NET Framework 3.5 Service Pack 1 required when uploading images or using Map Viewer. • Internet connection (broadband recommended) required to install .NET Framework (if necessary), to use auto update feature, and when performing such tasks as sharing pictures on-line or via e-mail. 1 Other versions of Windows are not supported. Only pre-installed operating systems are supported; operation is not guar- anteed on home-built computers or computers that have been upgraded from earlier versions of Windows. 2 Recommended when displaying HD movies. 2 Start the computer. Log in to an account with administrator privileges before proceeding.
99 Connections Viewing Pictures on a Computer 3 Exit any applications that may be running and insert the installer CD in a CD-ROM drive. Windows 8/Windows 7/Windows Vista Windows 8/Windows 7/Windows Vista If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control” dialog will then be displayed; click Ye s ( Windows 8/Windows 7) or Allow ( Windows Vista). The installer will start automatically; click Install MyFinePix Studio and follow the on-screen in- structions to install MyFinePix Studio and RAW FILE CONVERTER. If the Installer Does Not Start Automatically If the Installer Does Not Start Automatically If the installer does not start automatically, follow the steps below. • Windows 8: Select Desktop from the Start screen, then select File Explorer on the desktop taskbar and choose Computer in the navigation panel. Double-click the drive containing the installer CD and follow the on-screen instructions. • Other versions of Windows : Select Computer or My Computer from the Start menu, then double-click the FINEPIX CD icon to open the FINEPIX CD window and double-click setup or SETUP.EXE. 4 If prompted to install Windows Media Player or DirectX, follow the on-screen instructions to com- plete installation. 5 Remove the installer CD from the CD-ROM drive when installation is complete. Store the installer CD in a dry location out of direct sunlight in case you need to re-install the software. Installation is now complete. Proceed to “Connecting the Camera” ( P 101).
100 Viewing Pictures on a Computer Macintosh: Installing RAW FILE CONVERTER Macintosh: Installing RAW FILE CONVERTER RAW FILE CONVERTER is used to view RAW images on your computer. 1 Confi rm that the computer meets the following system requirements: CPUCPUIntel (Core 2 Duo or better) OSOSPre-installed copies of Mac OS X version 10.6–10.9 (visit http://www.fujifilm.com/support/digital_cameras/ compatibility/ for more information). RAMRAM 1 GB or more Free disk spaceFree disk space A minimum of 200 MB required for installation with 400 MB available when RAW FILE CONVERTER is running VideoVideo1,024 × 768 pixels or more with 24-bit color or better 2 After starting the computer and quitting any applications that may be running, insert the installer CD in a CD-ROM drive and double-click SILKYRFCEXInstaller. 3 Enter an administrator name and password when prompted and click OK, then follow the on- screen instructions to install. Click Exit to quit the installer when installation is complete. 4 Remove the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry location out of direct sunlight in case you need to re-install the software. Installation is now complete. Proceed to “Connecting the Camera” ( P 101).
101 Connections Viewing Pictures on a Computer Connecting the Camera Connecting the Camera 1 Find a memory card containing pictures you want to copy to the computer and insert the card into the camera (P 14). R Windows users may require the Windows CD when starting the software for the fi rst time. Q Loss of power during transfer could result in loss of data or damage to the memory card. Insert a fresh or fully-charged battery before connecting the camera. 2 Turn the camera off and connect a USB cable (available sepa- rately from third-party suppliers) as shown, making sure the connectors are fully inserted. Connect the camera directly to the computer; do not use a USB hub or keyboard. Q The USB cable must be no more than 1.5 m (4.9 ft.) long and be suitable for data transfer. 3 Turn the camera on. 4 Upload pictures in MyFinePix Studio and follow the on-screen instructions to copy pictures to the computer. To exit without copying pictures, click Cancel. Copying Pictures to Macintosh Computers (Mac OS) Copying Pictures to Macintosh Computers (Mac OS) Use a standard Mac OS application such as Image Capture to copy pictures or movies to a Mac. For more information on using the supplied software, start the application and select the appropriate option from the Help menu.
102 Viewing Pictures on a Computer Q If a memory card containing a large number of images is inserted, there may be a delay before the software starts and you may be unable to import or save images. Use a memory card reader to transfer pictures. Q Make sure that the computer does not display a message stating that copying is in progress and that the indi- cator lamp is out before turning the camera off or disconnecting the USB cable (if the number of images cop- ied is very large, the indicator lamp may remain lit after the message has cleared from the computer display). Failure to observe this precaution could result in loss of data or damage to the memory card. Q Disconnect the camera before inserting or removing memory cards. Q In some cases, it may not be possible to access pictures saved to a network server using the supplied software in the same way as on a standalone computer. Q The user bears all applicable fees charged by the phone company or Internet service provider when using services that require an Internet connection. Disconnecting the Camera Disconnecting the Camera After confi rming that the indicator lamp is out, turn the camera off and disconnect the USB cable. Uninstalling the Supplied Software Uninstalling the Supplied Software Only uninstall the supplied software when it is no longer required or before beginning reinstallation. After quitting the software and disconnecting the camera, drag “RAW FILE CONVERTER EX powered by SILKYPIX” from “Applications” into the Trash and select Empty Trash in the Finder menu (Macintosh), or open the control panel and use “Programs and Features” ( Windows 8/Windows 7/Windows Vista) or “Add or Remove Programs” ( Win- dows XP) to uninstall MyFinePix Studio. Under Windows, one or more confi rmation dialogs may be displayed; read the contents carefully before clicking OK.
103 Connections Printing Pictures via USBPrinting Pictures via USB If the printer supports PictBridge, the camera can be connected directly to the printer and pictures can be printed without fi rst being copied to a computer. Note that depending on the printer, not all the functions described below may be supported. Connecting the Camera Connecting the Camera 1 Connect a USB cable (available separately from third-party suppliers) as shown and turn the printer on. Q The USB cable must be no more than 1.5 m (4.9 ft.) long and be suitable for data transfer. 2 Turn the camera on. t USB will be displayed in the monitor, followed by the PictBridge dis- play shown below at right. USB 00 PICTBRIDGE TOTAL: 00000 SHEETS SETOK FRAME R Pictures can be printed from memory cards that has been formatted in the camera. R Page size, print quality, and border selections are made using the printer. Printing Selected PicturesPrinting Selected Pictures 1 Press the selector left or right to dis- play a picture you wish to print. R To print one copy of the current picture, pro- ceed directly to Step 3. 2 Press the selector up or down to choose the number of copies (up to 99). Repeat steps 1–2 to select ad- ditional pictures. 3 Press MENU/OK to display a confi rma- tion dialog. PRINT THESE FRAMES TOTAL: 9 SHEETS CANCELYES 4 Press MENU/OK to start printing.
104 Printing Pictures via USB Printing the Date of Recording Printing the Date of Recording To print the date of recording on pictures, press DISP/BACK in the PictBridge display and select PRINT WITH DATE s (to print pictures without the date of recording, select PRINT WITHOUT DATE). To ensure that the date is correct, set the camera clock before taking pictures. Some printers do not support date printing. See the printer manual for details. Printing the DPOF Print Order Printing the DPOF Print Order To print the print order created with K PRINT ORDER (DPOF) in the playback menu (P 86): 1 In the PictBridge display, press DISP/ BACK to open the PictBridge menu. 2 Press the selector up or down to highlight u PRINT DPOF. PICTBRIDGE PRINT WITH DATE sPRINT WITHOUT DATE PRINT DPOF 3 Press MENU/OK to display a confi rma- tion dialog. CANCELYES PRINT DPOF OK? TOTAL: 9 SHEETS 4 Press MENU/OK to start printing.