Fujifilm Camera X100t Owners Manual

Take the first shot.3. 
Press [MENU/OK] . The first shot will be shown supe rimposed on the view through the
lens as a guide to taking the second shot.
To return to Step 3 and retake the first  shot, press the selector left. To save the
first shot and exit without creating a multiple exposure, press  [DISP/BACK].
4. 
Take the second shot.5. 
Press [MENU/OK]  to create the multiple  exposure, or press the sele ctor left to return to
Step 5 and retake the second shot.6. 
Multiple Exposures
002D0020...

Follow an on-screen guide to take photos that will automatically be joined to form a panorama.
Press the  [DRIVE] button to display drive options.
1. 
Highlight  [MOTION PANORAMA] and press  [MENU/OK] to select the highlighted
option and return to shooting mode.2. 
To select the angle through  which you will pan the camera while shooting, press the
selector left. Press the selector up or  down to highlight an angle and press  [MENU/OK].3. 
Panoramas
002D0020 0031003000320020 002D  

Press the selector right to view a choice of pan directions. Press the selector up or down
to highlight a pan direction and press [MENU/OK].4. 
Press the shutter button all the way down to star t recording. There is no need to keep the
shutter button presse d during recording.5. 
Pan the camera in the direction shown by th e arrow. Shooting ends automatically when
the progress bar is full and the panorama is complete.
Shooting ends if the shutter button is  pressed all the way down during shooting.
No...

When a panorama is displayed in full-frame playback, you can press the selector down to
automatically pan from left to right or (if the panorama is in “tall” orientation) bottom to top.
Panoramas
002D0020 0031003000340020 002D  

OFF
 MACRO
To focus at close distances, press the select or up to choose a macro mode from the options
listed below.
At default settings, macro mode selection is  assigned to the up button on the selector
(function button 2). For information on ch oosing the roles assigned to the function
buttons, see “The Function Buttons”.
Macro mode can also be selected using the  [AUTOFOCUS SETTING] option in the
shooting menu.
Macro mode off
Macro mode
Macro Mode (Close-ups)
002D0020 0031003000350020 002D  

Macro mode is available only with the electronic viewfinder and LCD monitor. If the
optical viewfinder or dual optical viewfinder/electronic range finder is on when macro
mode is selected, the camera will automatically switch to the electronic viewfinder.
The LCD monitor and electronic viewfinder can be used at short ranges without first
enabling macro mode, but the camera may take longer to focus.
The shadow cast by the lens may appear in photographs taken with the flash at very
short ranges. Zoom out...

OFF
The [SELF-TIMER]  option in the shooting menu offers a choice of a ten-second timer for
self-portraits and a two-second timer to  prevent blur caused by camera shake.
Press the selector up or down to highlight the desired option and press  [MENU/OK] to select.
The shutter is released two seconds afte r the shutter button is pressed. Use to
reduce blur caused by the camera moving  when the shutter button is pressed. The
self-timer lamp will blink as the timer counts down.
The shutter is released ten...

Adjust settings for interval timer photography.Select  [INTERVAL TIMER SHOOTING]  in the shooting menu to display interval timer
shooting options.
1. 
Use the selector to choose the inte rval and number of shots. Press [MENU/OK] to
proceed.2. 
Use the selector to choose the starting time and then press  [MENU/OK]. Shooting will
start automatically.3. 
Interval timer photography can not be used  during panorama or multiple exposure
photography. In burst mode, only one pict ure will be taken each time the...

Use of a tripod is recommended.
Check the battery level before starting.
The display turns off between shots and lights a few seconds before the next shot is
taken. The display can be activated at any time by pressing the shutter button all the
way down.
Interval Timer Photography
002D0020 0031003000390020 002D  

[AUTO]
 [FORCED FLASH]
 [SLOW SYNCHRO]  [COMMANDER]
[EXTERNAL FLASH]
 [SUPPRESSED FLASH]
Use the flash for additional lighting when shooting at night or indoors under low light. The flash
mode can be selected using the  [FLASH MODE] option in the shooting menu.
Press the selector up or down to highlight the desired flash mode and press  [MENU/OK] to
select.
The flash fires when required. Recommended in most
situations.
The flash fires whenever a picture is taken. Use for backlit
subjects or for natural...