Fujifilm Camera X100t Owners Manual

In this mode, the camera sets exposure automatically. If desired, you can choose different
combinations of shutter speed and aperture that will produce the same exposure (program
shift).
To select program AE, set shutter speed and aperture to  [A].
Aperture: [A]
Shutter speed: [A]
If the subject is outside the metering range of the camera, the shutter speed and
aperture displays will show “– –  –”.
Program AE
002D0020 003800310020 002D  

Program Shift
If desired, you can rotate the command dial to select other combinations of shutter speed
and aperture without altering exposure (program shift).
Shutter speed
Aperture
The new values for shutter speed and aperture are shown in yellow.
To cancel program shift, turn the camera off.
Program shift will also be cancelled if a  flash mode other than off is selected.
Program shift is not available when a flash mode other than off is selected or
[AUTO] is selected for  [DYNAMIC RANGE] .
Program...

In shutter-priority AE (mode S), you select the shutter speed and let the camera choose the
aperture. Set aperture to  [A] and rotate the shutter speed dial to the desired setting.
Aperture: [A]
Shutter speed: 1/1000 s
Shutter speed
Shutter-Priority AE
002D0020 003800330020 002D  

Shutter speed can also be adjusted in increments of 1/3 EV by rotating the command
dial.
If the correct exposure can not be achieved  at the selected shutter speed, aperture will
be displayed in red when the shutter button is pressed halfway.
If the subject is outside the metering range of the camera, the aperture display will
show “– –  –”.
Shutter-Priority AE
002D0020 003800340020 002D  

In aperture-priority AE (mode A), you select the aperture and let the camera choose the shutter
speed. Rotate the shutter speed dial to  [A] and select the desired aperture.
Aperture: f/5.6
Shutter speed: [A]
Aperture
Aperture-Priority AE
002D0020 003800350020 002D  

If the correct exposure can not be achieved at the selected aperture, the shutter speed
will be displayed in red when the shutter button is pressed halfway. Adjust aperture
until the correct exposure is achieved.
If the subject is outside the metering range of the camera, the shutter speed display will
show “– –  –”.
The slowest shutter speed available when  [ON] is selected for  [POWER
MANAGEMENT]  > [OVF POWER SAVE MODE]  in the setup menu is 1/4 s.
Previewing Depth of Field
When [PREVIEW DEPTH OF...

In this mode, you choose both shutter speed and aperture. The  resulting exposure is shown by
an indicator in the display; if desired, exposure  can be altered from the value suggested by the
camera.
Aperture: f/5.6
Shutter speed: 1/1000 s
Shutter speed
Aperture
Exposure indicator
Manual Exposure
002D0020 003800370020 002D  

Shutter speed can also be adjusted in increments of 1/3 EV by rotating the command
dial.
Exposure Preview
To preview exposure in the LCD monitor, select  [ON] for [SCREEN SET-UP]  >
[PREVIEW EXP. IN MANUAL MODE] .
Select [OFF] when using the flash or on other occasions on which exposure may
change when the picture is taken.
Manual Exposure
002D0020 003800380020 002D  

Using the [Q] Button
[Q] (Quick Menu) Button
002D0020 003800390020 002D  

Use the [Q] button to view and adjust camera settings.
Press  [Q] to display the quick menu during shooting.
The options displayed in the quick menu can be selected using the  [EDIT/SAVE
QUICK MENU]  option in the setup menu. Quick menu edit options can also be
displayed by pressing and holding the  [Q] button.
1. 
Using the [Q] Button
002D0020 003900300020 002D