Fujitsu Fuji Xt10 Instruction Manual

							125
Connections
Printing Pictures via USB
To modify the DPOF print order, select K PRINT 
ORDER (DPOF) in the playback menu and press 
the selector up or down to highlight WITH 
DATE  s or WITHOUT DATE.
SLIDE SHOW PLAYBACK MENU
PHOTOBOOK ASSIST
MARK FOR UPLOAD TO
IMAGE SEARCH
PRINT ORDER  (
DPOF )
PC AUTO SAVERED EYE REMOVALY
WITH DATE sWITHOUT DATE
RESET ALL
WITH DATE s: Print date of recording 
on pictures.
WITHOUT DATE: Print pictures without 
date.
Press MENU/OK and follow the steps below.
 1  Press the selector left or right to dis-
play a picture you wish to include in 
or remove from the print order.
 2 Press the selector up or down to choose the number of copies (up 
to 99).  To remove a picture from the 
order, press the selector down until 
the number of copies is 0.
01
PRINT ORDER  (
DPOF )
SHEETS SET
FRAMEDPOF: 00001Total number of prints
Number of copies
 Creating a DPOF Print Order Creating a DPOF Print Order
The  K PRINT ORDER (DPOF) option in the playback menu can be used to create a digital “print order” 
for PictBridge-compatible printers or devices that support DPOF.
  DPOF DPOF
DPOF (Digital  Print Order  Format) is standard that allows pictures to be printed from “print orders” 
stored on the memory card.  The information in the order includes the pictures to be printed and the 
number of copies of each picture.
 
■ WITH DATE s/ WITHOUT  DATE 
						

							126
Printing Pictures via USB
 3 Repeat steps 1–2 to complete the print order.  Press MENU/OK to save 
the print order when settings are 
complete, or DISP/BACK to exit with-
out changing the print order.
 4 The total number of prints is dis- played in the monitor.  Press MENU/OK 
to exit.
The pictures in the current 
print order are indicated by a 
u icon during playback.
 
■ RESET ALL
To cancel the current print 
order, select RESET ALL for 
K  PRINT ORDER (DPOF) .  The 
confi rmation shown at right 
will be displayed; press  MENU/OK 
to remove all pictures from the 
order.
 
R Print orders can contain a maximum of 999 pictures.
 
R If a memory card is inserted 
containing a print order cre-
ated by another camera, the 
message shown at right will 
be displayed.  Pressing MENU/OK 
cancels the print order; a new 
print order must be created as 
described above.
CANCELYES
RESET DPOF OK?
NOYES
RESET DPOF OK? 
						

							127
Connections
 instax SHARE Printers instax SHARE Printers
Print pictures from your digital camera to instax SHARE printers.
 Establishing a Connection Establishing a Connection
Select r CONNECTION SETTING > instax PRINTER CONNECTION SETTING in the camera setup 
menu and enter the instax SHARE printer name (SSID) and password.
  The Printer Name (SSID) and Password  The Printer Name (SSID) and Password
The printer name (SSID) can be found on the bottom of the printer; the default 
password is “1111”.  If you have already chosen a diff erent password to print 
from a smartphone, enter that password instead.
SSID:instax-12345678XxxxxXxxx XX:000000000XxxxxXxxx XX:000000000XxxxxXxxx XX:000 
						

							128
instax SHARE Printers
 Printing Pictures Printing  Pictures
 1  Turn the printer on.
 2 Select V instax PRINTER PRINT  in the cam-
era playback menu.  The camera will connect 
to the printer.
FUJIFILM-CAMERA-1234 CONNECTING TO PRINTER
CANCEL PRINTER PRINT
instax-12345678
 
R To print a frame from a burst sequence, display 
the frame before selecting V  instax PRINTER 
PRINT.
 3 Use the selector to display the picture you  want to print, then press MENU/OK.
100-0020100-0020
instax-12345678 PRINTER PRINTTRANSMIT CANCEL
 
R Pictures taken with other cameras can not be 
printed.
 
R The area printed is smaller than the area visible 
in the LCD monitor.
 4 The picture will be sent to the printer and 
printing will start.
FUJIFILM-CAMERA-1234
CANCELSENDING
PRINTER PRINT
instax-12345678 
						

							129
Connections
 Viewing Pictures on TV Viewing Pictures on TV
To show pictures to a group, connect the camera to a TV using an HDMI cable (available separately 
from third-party suppliers; note that the TV can only be used for playback, not shooting).
 1  Turn the camera off .
 2  Connect the cable as shown below.
Insert into 
Micro HDMI connector
Insert into 
HDMI connector
 
Q Use an HDMI cable no more than 1.5 m (4.9 ft.) long.
 
R Be sure the connectors are fully inserted.
 3 Tune the television to the HDMI input channel.  See the documentation supplied with the televi-
sion for details.
 4 Turn the camera on and press a button.  The camera monitor turns off   and pictures and movies 
are played back on the TV.  Note that the camera volume controls have no eff  ect on sounds played 
on the TV; use the television volume controls to adjust the volume.
 
R The USB cable can not be used while an HDMI cable is connected.
 
R Some televisions may briefl y display a black screen when movie playback begins. 
						

							130
Technical NotesTechnical Notes
 Optional Accessories Optional  Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
 Accessories from FUJIFILM Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM.  For the latest information on the accesso-
ries available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm.com/
products/digital_cameras/index.html.
Rechargeable Li-ion batteriesRechargeable Li-ion batteries
NP-W126 : Additional large-capacity NP-W126 rechargeable batteries can be purchased as required.
Battery chargersBattery chargers
BC-W126 : Replacement battery chargers can be purchased as required.  At +20 °C/+68 °F, the BC-W126 
charges an NP-W126 in about 150 minutes.
AC power adaptersAC power adapters
AC-9V (requires CP-W126 DC coupler): Use for extended shooting and playback or when copying pictures to a computer.
 DC couplers DC  couplersCP-W126 : Connect the AC-9V to the camera.
Remote releasesRemote releases
RR-90: Use to reduce camera shake or keep the shutter open during a time exposure. 
						

							131
Technical Notes
Optional Accessories
Stereo microphonesStereo microphonesMIC-ST1: An external microphone for movie recording.
 FUJINON lenses FUJINON  lensesXF-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
XC-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
 Shoe-mounted fl  ash units Shoe-mounted fl  ash unitsEF-20: This clip-on fl  ash unit (powered by two AA batteries) has a Guide Number of 20/65 (ISO 100, m/ft.) and 
supports TTL fl ash control.  The fl ash head can be rotated upwards 90° for bounce lighting.
EF-42: This clip-on fl ash unit (powered by four AA batteries) has a Guide Number of 42/137 (ISO 100, m/ft.) 
and supports TTL fl ash control and auto power zoom in the range 24–105 mm (35 mm format equivalent).  
The fl ash head can be rotated 90° up, 180° left, or 120° right for bounce lighting.
EF-X20: This clip-on fl ash unit has a Guide Number of 20/65 (ISO 100, m/ft.).
instax SHARE printersinstax SHARE printersSP-1: Connect via wireless LAN to print pictures on instax fi lm.
Mount adaptersMount adaptersFUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a wide selection of M-mount lenses. 
						

							132
Optional Accessories
Macro extension tubesMacro extension tubesMCEX-11/16: Attach between the camera and the lens to shoot at high reproduction ratios.
Protective fi  ltersProtective fi  ltersPRF-39/PRF-49S/PRF-52/PRF-58/PRF-62/PRF-67/PRF-72/PRF-77 : Use to protect the lens.
GripsGrips
MHG-XT10: Features an improved grip.  Batteries and memory cards can be removed with the grip in place, and the grip is equipped with a rail for quick-shoe camera mounts.  The tripod mount can be aligned with the lens optical axis.
Grip beltGrip belt
GB-001: GB-001 enhances the camera’s hold, allowing users to carry the camera fi rmly with just one hand.
Leather casesLeather casesBLC-XT10 : This case combines practicality with the luxury of leather and comes with a shoulder strap made of the same material, 
as well as a cloth that can be used to wrap the camera before putting it in the case and on other occasions.  Pictures can be 
taken and batteries inserted or removed with the camera still in its case.
Front lens capsFront lens caps
FLCP-39/FLCP-52/FLCP-58/FLCP-62/FLCP-72/FLCP-72 II/FLCP-77: Protect the front lens element when the lens is not in use.
Rear lens capsRear lens capsRLCP-001: Protect the rear lens element when the lens is not attached to the camera.
Body capsBody capsBCP-001: Cover the camera lens mount when no lens is attached. 
						

							133
Technical Notes
Optional Accessories
 Connecting the Camera to Other Devices Connecting the Camera to Other Devices
X-T10
  ■■Macro Extension TubeMacro Extension Tube
MCEX-11/16 *
  ■■Computer RelatedComputer Related
Computer †
  ■■PrintingPrinting
Printer †PictBridge-
compatible printer †
* Available separately from FUJIFILM.
† Available separately from third-party suppliers.  USB cables  must be no more than 60 cm (1.9 ft.) long, HDMI cables no 
more than 1.5 m (4.9 ft.) long.
USB cable †
USB cable †
SD/SDHC/SDXC memory card †
  ■■LensLens
XF-series lenses *XC-series lenses *
  ■■Flash PhotographyFlash Photography
EF-20 shoe mount  fl ash *EF-42 shoe mount fl ash *EF-X20 shoe 
mount fl ash *
  ■■Remote Shutter Remote Shutter 
ReleaseRelease
  ■■External External 
MicrophonesMicrophones
MIC-ST1 stereo 
microphone *RR-90 remote release *
  ■■M Mount AdapterM Mount Adapter
FUJIFILM M MOUNT ADAPTER *
HDTV †
  ■■Audio/VisualAudio/Visual
HDMI cable †
SP-1 instax  SHARE 
printer 
*Wireless LAN 
						

							134
Caring for the CameraCaring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
Use and Storage PrecautionsUse and Storage Precautions
If the camera will not be used for an extended pe-
riod, remove the battery and memory card.  Do 
not store or use the camera in locations that are:
•  exposed to rain, steam, or smoke
•  very humid or extremely dusty
• exposed to direct sunlight or very high tem-peratures, such as in a closed vehicle on a very 
hot day
• extremely cold
•  subject to strong vibration
•  exposed to strong magnetic fi elds, such as near  a broadcasting antenna, power line, radar emit-
ter, motor, transformer, or magnet
• in contact with volatile chemicals such as pes- ticides
•  in contact with rubber or vinyl products 
■ Water and Sand
Exposure to water and sand can also damage the 
camera and its internal circuitry and mechanisms.  
When using the camera at the beach or seaside, 
avoid exposing the camera to water or sand.  Do 
not place the camera on a wet surface.
 
■ Condensation
Sudden increases in temperature, such as occur 
when entering a heated building on a cold day, 
can cause condensation inside the camera.  If this 
occurs, turn the camera off  and wait an hour be-
fore turning it on again.  If condensation forms on 
the memory card, remove the card and wait for 
the condensation to dissipate.
TravelingTraveling
Keep the camera in your carry-on baggage.  
Checked baggage may suff er violent shocks that 
could damage the camera.