Fujitsu Fuji Xt10 Instruction Manual
Have a look at the manual Fujitsu Fuji Xt10 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 86 Fujitsu manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
15 First Steps Attaching the Strap 5 Insert the strap.Insert the strap through a protective cover and strap clip. 6 Fasten the strap.Fasten the strap as shown. Repeat Steps 5–6 for the second eyelet. Q To avoid dropping the camera, be sure the strap is correctly secured.
16 Attaching a Lens Attaching a Lens Lenses attach as described below. Q Care is required to prevent dust or other particles from entering the camera while attaching and removing lenses. 1 Remove the body and rear caps. Remove the body cap from the camera and the rear cap from the lens. Q Do not touch the camera’s internal parts. 2 Attach the lens. Place the lens on mount, keeping the marks on the lens and camera aligned, and then ro- tate the lens until it clicks into place. Q Do not press the lens release button while at- taching the lens. Removing Lenses Removing Lenses To remove the lens, turn the camera off , then press the lens release button and rotate the lens as shown. Lens release button Q To prevent dust accumulating on the lens or inside the camera, replace the lens caps and camera body cap when the lens is not attached. Lenses and Other Optional Accessories Lenses and Other Optional Accessories The camera can be used with lenses for the FUJIFILM X-mount and the other accessories listed from page 130.
17 First Steps Charging the Battery Charging the Battery The battery is not charged at shipment. Before use, charge the battery in the supplied battery charger. 1 Place the battery in the charger.Place the battery in the supplied battery char- ger as shown. Battery charger Battery Charge lamp Arrow The camera uses an NP-W126 rechargeable bat- tery. R The supplied AC cord is for use exclusively with the supplied battery charger. Do not use the supplied charger with other cords or the sup- plied cord with other devices. 2 Plug the charger in. Plug the charger into an indoor power outlet. The charging indicator will light. The Charging Indicator The Charging Indicator The charging indicator shows battery charge sta- tus as follows: Charging Charging indicatorindicatorBattery statusBattery statusActionAction Off Off Battery not Battery not inserted.inserted.Insert the battery.Insert the battery. Battery fully Battery fully charged.charged.Remove the battery.Remove the battery. OnOnBattery charging.Battery charging.—— BlinksBlinksBattery fault.Battery fault.Unplug the charger Unplug the charger and remove the and remove the battery.battery. 3 Charge the battery. Remove the battery when charging is com- plete. See the specifi cations (P 150) for charg- ing times (note that charging times increase at low temperatures). Q Unplug the charger when it is not in use.
18 Inserting the Battery and a Memory Card Inserting the Battery and a Memory Card The camera has no internal memory; instead, pictures are stored on optional SD, SDHC, and SDXC memory cards (sold separately). After charging the battery, insert the battery and memory card as described below. 1 Open the battery-chamber cover.Slide the battery-chamber latch as shown and open the battery-chamber cover. Q Do not open the battery-chamber cover when the camera is on. Failure to observe this precau- tion could damage image fi les or memory cards. Q Do not use excessive force when handling the battery-chamber cover. 2 Insert the battery. Using the battery to keep the battery latch pressed to one side, insert the battery con- tacts fi rst in the direction shown by the arrow. Confi rm that the battery is securely latched. Battery latch Arrow Q Insert the battery in the orientation shown. Do not use force or attempt to insert the battery up- side down or backwards. The battery will slide in easily in the correct orientation.
19 First Steps Inserting the Battery and a Memory Card 3 Insert the memory card.Holding the memory card in the orientation shown, slide it in until it clicks into place at the back of the slot. Click! Q Be sure card is in the correct orientation; do not insert at an angle or use force. Q SD/SDHC/SDXC memo- ry cards can be locked, making it impossible to format the card or to record or delete images. Before inserting a memory card, slide the write- protect switch to the unlocked position. 4 Close the battery-chamber cover. Write-protect switch
20 Inserting the Battery and a Memory Card Removing the Battery and Memory Card Removing the Battery and Memory Card Before removing the battery or memory card, turn the camera off and open the battery-chamber cover. To remove the battery, press the battery latch to the side, and slide the battery out of the cam- era as shown. Battery latch To remove the memory card, press it in and release it slowly. The card can then be removed by hand. When a memory card is removed, the card could be ejected too quickly. Use your fi nger to hold it and gently re- lease the card. QQBatteriesBatteries • Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this precaution could prevent the battery from charging. • Do not affi x stickers or other objects to the battery. Failure to observe this precaution could make it im- possible to remove the battery from the camera. • Do not short the battery terminals. The battery could overheat. • Read the cautions in “ The Battery and Power Supply” (P iv). • Use only battery chargers designated for use with the battery. Failure to observe this precaution could re- sult in product malfunction. • Do not remove the labels from the battery or attempt to split or peel the outer casing. • The battery gradually loses its charge when not in use. Charge the battery one or two days before use.
21 First Steps Inserting the Battery and a Memory Card ■ Compatible Memory Cards FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the cam- era. A complete list of approved memory cards is available at http://www.fujifilm.com/support/digital_ cameras/compatibility/. Operation is not guaranteed with other cards. The camera can not be used with xD-Picture Cards or MultiMediaCard (MMC) devices. QQMemory CardsMemory Cards • Do not turn the camera off or remove the memory card while the memory card is being formatted or data are being recorded to or deleted from the card. Failure to observe this precaution could damage the card. • Format memory cards before fi rst use, and be sure to reformat all memory cards after using them in a computer or other device. For more information on formatting memory cards, see page 114. • Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card, seek medical assistance immediately. • miniSD or microSD adapters that are larger or smaller than the standard dimensions of an SD/SDHC/SDXC card may not eject normally; if the card does not eject, take the camera to an authorized service representative. Do not forcibly remove the card. • Do not affi x labels to memory cards. Peeling labels can cause camera malfunction. • Movie recording may be interrupted with some types of SD/SDHC/SDXC memory card. Use a H card or better for movies and burst photography. • Formatting a memory card in the camera creates a folder in which pictures are stored. Do not rename or delete this folder or use a computer or other device to edit, delete, or rename image fi les. Always use the camera to delete pictures; before editing or renaming fi les, copy them to a computer and edit or rename the copies, not the originals. Renaming the fi les on the camera can cause problems during playback.
22 Turning the Camera on and Off Turning the Camera on and Off Rotate the ON/OFF switch to ON to turn the camera on. Select OFF to turn the camera off . R Press the a button to start playback. Press the shutter button halfway to return to shooting mode. R The camera will turn off automatically if no operations are performed for the length of time selected for Z POWER MANAGEMENT > AUTO POWER OFF (P 111). To reactivate the camera after it has turned off automatically, press the shutter button halfway or turn the ON/OFF switch to OFF and then back to ON. R For information on startup options, see page 111. Q Fingerprints and other marks on the lens or viewfi nder can aff ect pictures or the view through the viewfi nder. Keep the lens and viewfi nder clean. Battery Level Battery Level After turning the camera on, check the battery level in the display. IndicatorIndicatorDescriptionDescription D (white) Battery partially discharged. C (white) Battery more than half discharged. B (red) Low battery. Charge as soon as possible. A (blinks red) Battery exhausted. Turn camera off and recharge battery. P
23 First Steps Basic Setup Basic Setup A language-selection dialog is displayed the fi rst time the camera is turned on. 1 Choose a language. START MENU NOSETENGLISH FRANCAIS DEUTSCH Highlight a language and press MENU/OK. R Press DISP/BACK to skip the current step. Any steps you skip will be dis- played the next time the camera is turned on. 2 Set the date and time. NOSET YY. MM. DD DATE / TIME NOT SET 1. 1201512 : 00AM2014 2013 2017 2016 Press the selector left or right to highlight the year, month, day, hour, or minute and press up or down to change. To change the order in which the year, month, and day are displayed, highlight the date for- mat and press the selector up or down. Press MENU/OK to exit to shoot- ing mode when settings are complete. R If the battery is removed for an extended period, the camera clock will be reset and the language-selection dialog will be displayed when the camera is turned on.
24 Basic Setup Changing Basic Settings Changing Basic Settings To change the language or reset the clock: 1 Display the desired option.Display the setup menu and select Q a to change the language or F DATE/TIME to reset the clock (P 105). 2 Adjust settings. To choose a language, highlight the desired option and press MENU/OK. To set the clock, press the selector left or right to highlight the year, month, day, hour, or minute and press up or down to change, then press MENU/OK once the clock has been set to your satisfaction.