Fujitsu Myrica SE32 User Manual

							  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 9 
 SCART 1  Connection for AV, RGB and audio input signals 
e.g. for satellite receiver, DVD player, video recorder, 
camcorder, decoders or a gaming console 
Out (TV-signal): 
e.g. video recorder, dvd recorder 
 SCART 2  Connection for AV, RGB and audio input signals 
e.g. for satellite receiver, DVD player, video recorder, or a 
gaming console 
Out (picture signal) 
 AV: 
AUDIO 
red (right) 
white (left) 
 VIDEO 
yellow 
Connections for video and audio input signals 
e.g. for DVD player, video recorder, film camera with video 
port or gaming console 
 S-VIDEO IN: 
AUDIO 
red (right) 
white (left) 
 S-VIDEO  
Connections for S-video and audio input signals 
e.g. for DVD player, video recorder, a film camera with S-
Video connection or a PC 
 
TV-ANT. antenna port 
 AC INPUT  Connector for the power cable  
 
						

							LCD TV MYRICA SE 32 
10 - English A26361-K1085-Z120-1-M119, edition 1 
Connecting LCD TV 
 Connecting antenna 
►
  Connect an antenna cable to the device and the 
TV antenna socket.  
 Connecting the power supply 
►
  Plug the power cable supplied into the power 
connector of the LCD TV. 
You will find the power connector on the underside of 
the LCD TV. 
►   Connect the connector of the power cable 
supplied into a properly earthed mains outlet and 
ensure a secure connection. 
Switching LCD TV on/off  
 
 ►  Press the On/Off switch at the lower left on the 
front of the LCD TV. 
 From the indicator at the lower right on the front  of the LCD TV you can recognise whether the 
device is in operation, in the standby mode or switched off. 
Green 
Red 
Dim  = 
= 
= The device is switched on. 
The device is in standby mode. 
The device is switched off. 
 
 
						

							  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 11 
Setting language of the OSD menu 
After switching on the device, set the language of the OSD (On Screen Display) menu according to 
your needs. 
►   Switch the LCD TV on with the ON/OFF switch. 
►   Press the POWER button. 
►   Press the MENU button to open the OSD menu. 
►  Choose the  SYSTEM menu item using the 
 button. 
►  Press the 
 button to activate the menu item. 
The menu item  LANGUAGE is preset. 
►  Press the 
 button to activate the menu item. 
►   Select the language to be shown in the OSD menu with the 
 button. 
►   Press the Menu button. The OSD menu will be changed over to the selected language. 
Carrying out programme search  
A programme search must be carried out to put the  LCD TV into operation. Use the supplied remote 
control. 
►   Switch the LCD TV on with the ON/OFF switch. 
►   Press the POWER button. 
►   Press the MENU button to open the OSD menu. 
►  Choose the  TV SETUP menu item using the 
 button. 
►  Press the 
 button to activate the menu item. 
The menu item  CH-SCAN is preset. 
►  Press the 
 button to activate the menu item. 
►   Select your country with the 
 button. 
►  Press the 
 button to start the programme search.  
Wait until the programme search is completed.  Then the device shows the first programme found. 
 
i Different programmes are available on some channel
s at different times. As a result, it is 
possible that, depending on the time of a progr amme search, different programmes will be 
found. 
 
 
						

							LCD TV MYRICA SE 32 
12 - English A26361-K1085-Z120-1-M119, edition 1 
 
  
i The programmes will be entered in the programme 
list in the order in which they are found. 
However, you can change the order of the programmes later (see Arranging 
programmes). 
Adjusting programme settings 
After the programme search, you can change various pr ogramme settings later, e.g. the order of the 
programmes in the programme list, the progra mme names or the frequency of a channel. The 
following sections contain a descrip tion of how to change the settings. 
In the following sections Arranging programme s, Changing programme properties and Setting 
the channel a description of how to set the programmes is provided. 
Arranging programmes  
With the OSD menu you can rearrange the order of  the programmes according to your personal 
preferences. To rearrange the order of the programme s, first mark the respective program you want 
to move, and then mark the programme with whic h it is to exchange its position in each case. 
►   Press the MENU button to open the OSD menu. 
►  Choose the  TV SETUP menu item using the 
 button. 
►  Press the 
 button to activate the menu item. 
►  Choose the  PROGRAM menu item using the 
 button. 
►  Press the 
 button to activate the menu item. 
 
 
						

							  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 13 
 The programme list will be displayed with the first 9 
programmes found. If a programme name was detected 
during the programme search, it will be displayed. 
►
  Select the programme you want to move with the 
buttons 
 /  and mark it by pressing the  button. 
The marked programme is displayed in green. 
  ►
  Select the position at which you want to insert the 
programme with the buttons 
 / . Press the 
 button  
The selected programmes swap their positions. 
Changing programme properties  
You can change the following properties of a programme: 
●  You can change the frequency of a programme. 
●   You can change the programme name displayed in the programme list (maximum of 5 
characters). 
●   You can Hide a programme  in the programme list (SKIP). 
●   You can select a different TV standard. 
 ►   Press the MENU button to open the OSD menu. 
►  Choose the  TV SETUP menu item using the 
 button. 
►  Press the 
 button to activate the menu item. 
►  Choose the  PROGRAM menu item using the 
 button. 
►  Press the 
 button to activate the menu item. 
The programme list will be displayed with the first 9 programmes found. 
►  Press the 
 button to change to the menu for setting the programme properties. 
Setting frequency 
►   Mark the property  CH with the buttons 
 / . 
►   Set the frequency as required with the 
 /  buttons.  
 
						

							LCD TV MYRICA SE 32 
14 - English A26361-K1085-Z120-1-M119, edition 1 
Changing programme name 
Five characters are available for the programme name. 
►   Mark the position for the character you want to change under  ID with the buttons 
 / . 
►   Select the desired character at  this position with the buttons 
 / . 
►   Repeat this procedure until you have entered the desired programme name. 
Hiding programme in programme list 
If you want to hide a programme in the programme list ( SKIP=switched on), the programme is 
skipped when you change the programmes with the buttons 
 / . 
►   Mark the property  SKIP with the buttons 
 / . 
►  Switch the  SKIP property on or off with the buttons 
 / . 
Selecting a different TV standard 
►   Mark the property  TV SYS with the buttons 
 / . 
►   Select the desired TV standard with the 
 /  buttons. 
Setting the channel  
You can manually set the frequency and the TV standard for each channel. 
►  Press the MENU button to open the OSD menu. 
►  Choose the  TV SETUP menu item using the 
 button. 
►  Press the 
 button to activate the menu item. 
►  Choose the  MANUAL SCAN menu item using the 
 button. 
►  Press the 
 button to activate the menu item. 
Setting frequency 
►   Mark the property  MHz with the buttons 
 / . 
►   Set the frequency as required with the 
 /  buttons. 
Selecting a different TV standard 
►   Mark the property  TV SYS with the buttons 
 / . 
►   Select the desired TV standard with the 
 /  buttons. 
 
						

							  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 15 
Add Programs 
i Different programmes are available on some channel
s at different times. As a result, it is 
possible that, depending on the time of a progr amme search, different programmes will be 
found. 
 With this function you search  for additional programmes when a programme search has already 
been carried out. The sorting of the programme list is retained and new programmes found are 
added at the end of the programme list. 
►   Press the MENU button to open the OSD menu. 
►  Choose the  TV SETUP menu item using the 
 button. 
►  Press the 
 button to activate the menu item. 
►  Choose the  UPDATE SCAN menu item using the 
 button. 
►  Press the 
 button to activate the menu item. 
►   Select your country with the 
 button. 
►  Press the 
 button to start the programme search.  
Wait until the programme search is completed.  Then the device shows the first programme found. 
 
						

							LCD TV MYRICA SE 32 
16 - English A26361-K1085-Z120-1-M119, edition 1 
Operation 
Controls are provided on the device and the  remote control for operating the LCD TV. 
Operating elements on the device 
The operating controls of the LCD TV are located  in the underside of the device. With these buttons 
you can operate the basic functions  of the LCD TV and the OSD menu. 
13245  1 =   STANDBY button 
for changing over from the Normal mode to 
the Standby mode and vice versa 
2 =   SOURCE button  for selecting the video input source  3 =   Programme selection button (CHANNEL) 
or button for selecting a function 
4 =   Volume button (VOLUME)  or button for setting values 
5 =   MENU button  for opening or exiting the OSD menu 
 
 
						

							  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 17 
Changing the device settings with the buttons of the control 
panel 
Use the buttons of the control panel to make the following device settings directly while the OSD 
menu is switched off. 
Selecting picture signal source 
►   Press the SOURCE button. The current signal input is displayed. 
►   Press the SOURCE button repeatedly  until the desired signal input appears. 
Selecting TV programme 
►  Press the  ST buttons to change over to the next or previous programme. 
Adjusting the volume 
►  Press the  W / X  buttons to adjust the volume. 
Opening and operating OSD menu 
►   Press the MENU button to open the OSD menu. 
►   Mark the desired menu item with the  S/T  buttons. 
►  Press the  X button to open a submenu and activate a menu item. 
►   Set the values as required with the  W / X  buttons. 
►   Press the MENU button to return from a submenu to the main menu. 
All changes are stored automatically. 
 
 
						

							LCD TV MYRICA SE 32 
18 - English A26361-K1085-Z120-1-M119, edition 1 
Remote control 
 1  = POWER - switches the device on or into 
the standby mode. 
 2  = MUTE - switches the sound on and off. 
 3  = FREEZE - freezes the video picture. 
If you press the button again, the picture 
returns to the normal mode. 
 4  = SLEEP - Sleep timer 
By pressing several times you can set the 
Sleep timer to 0, 30, 60, 90 or 120 minutes. 
PIP (Picture in Picture)  
 5 = PIPSOURCE - Activates the PIP mode 
Press this button once more to select the 
signal source for the PIP mode. 
 6  = SWAP - swaps the display of the main 
and the PIP window in the  PIP mode 
 7  = POSITION - changes the position of the 
PIP window in the PIP mode  
 8  = SIZE - changes the size of the PIP 
window (3 different sizes) 
 9  = MAIN - activates the audio output of the 
main display in the PIP mode 
10  = PIP - activates the audio output of the 
PIP display in the PIP mode 
1 2
3 4
5
6 7
8
9
12
13
14 11 10
15
 
 11  = Volume -/+ 
12  = changing programs 
13  = 0 - 9 
With this button you select the programme 
directly. 
14  = R - Return 
With this button you change back to the 
programme previously set. 
15  = i - Informations 
With this button you display the signal status 
(input source, channel; audio mode).