Fujitsu Myrica SE32 User Manual

							  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 19 
 
Teletext 
16 = TELETEXT - activates the Teletext 
function 
If you press the button again, Teletext with the 
TV function is activated. 
When you press the button a third time, the 
Teletext function is switched off.  
17  = UPDATE 
Press the UPDATE button to switch to TV 
mode while waiting for the text page. 
Press the UPDATE button again to revert to 
Teletext mode.  
18  = INDEX - opens the Index page 
With the number buttons (0 to 9) you can 
number the Teletext page and add it to the 
selected page or the second element.  
19  = SUB - opens the sub-page (if available) 
20  = PAGE UP/DOWN - scrolls in Teletext 
21  = SHOW - shows hidden information, e.g. 
the answer to a riddle 
22  = SIZE - changes the font size 
FULL (entire screen) default full-screen 
Teletext 
TOP (upper half) - the content of the upper 
half of the page is shown on the entire screen 
BOTTOM (lower half) - the content of the 
lower half of the page is shown on the entire 
screen  
23  = STOP - stops the automatic scrolling of a 
Teletext page 
24  = R / G / Y / B - opens special pages 
Each channel offers its own functions.  
18 16
17
22
23
24 21 19
26
27 25 20
29
28
  25
 = ASPECT - changes the page aspect of 
the display (4 level) 
26  = PICTURE 
With this button you select the picture mode. 
Possible values:  MOVIE, SPORT , GAME , 
VIVID , USER  
27  = MENU - Opens the OSD menu 
28  = AUDIO 
With this button you select an audio setting. (4 
options) 
29  = SOURCE 
With this button you select the signal source. 
 
						

							LCD TV MYRICA SE 32 
20 - English A26361-K1085-Z120-1-M119, edition 1 
Changing device settings with remote control 
You can open and operate the integrated OSD (On Screen Display) menu with the buttons of the 
control panel on the LCD TV or the remote control. 
The VOLUME- control button is equivalent to the 
 button on the remote control. 
The VOLUME + control button is equivalent to the 
 button on the remote control. 
The CHANNEL S control button is equivalent to the 
 button on the remote control. 
The CHANNEL T control button is equivalent to the 
 button on the remote control. 
To set the OSD menu, perform the following steps: 
►   Press the MENU button to open the OSD menu. 
►   Mark the desired menu item with the 
 /  buttons. 
►  Press the 
 button to open a submenu and activate a menu item. 
In the individual menus, the buttons ava ilable to you in each case are shown. 
►   Mark the option you want to change. 
►   Set the desired value or activate the desired function. 
►   Press the MENU button to return to the main menu from a submenu or to ex\
it the OSD menu. 
All changes are stored automatically. 
 
						

							  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 21 
Description of menus 
i The OSD menu is available in different 
languages. The English menu names are used in 
the following description (default setting). 
Different menus and different options are  available to you depending on the set signal 
source. The currently available menus and opti ons are shown brightly highlighted in each 
case in the OSD menu. 
 The following main menus are available to you in the OSD menu: 
  DISPLAY 
Here you set the default picture se
ttings (colours, contrast etc.). 
 ADVANCED 
Here you set the picture mode and the advanced picture settings. 
 GEOMETRY 
Here you set the position and sharpness of the picture. 
  TV SETUP 
Here you set the programmes of your LCD TV. 
 
AUDIO 
Here you set the sound of your LCD TV. 
 
SYSTEM 
Here you set the language and the transparency of the OSD menu. 
 
						

							LCD TV MYRICA SE 32 
22 - English A26361-K1085-Z120-1-M119, edition 1 
DISPLAY menu - default picture settings 
CONTRAST (contrast) 
This function increases or  decreases the contrast. 
Possible values:  0 -100 
BRIGHTNESS  (brightness) 
With this function you set the picture brighter or darker. 
Possible values:  0 -100 
COLOUR TEMP  (colour temperature) 
With this button you set the colour temperature. 
Possible values:  COOL, NORMAL , WARM , USER  
RED  
GREEN  
BLUE 
With this function you increase  or decrease the intensity of 
the marked colour. 
Possible values:  0 -100 
WHITE BALANCE 
With this function you set the white balance.  
BACK LIGHT 
With this function you set the intensity of the background 
lighting. 
Possible values: HIGH, NORMAL , LOW  
SATURATION 
With this function you set the colour saturation. 
Possible values:  0 -100 
HUE 
With this function you set the hue redder or greener. 
Possible values:  -25 - 25 
SHARPNESS 
With this function you set the sharpness of the picture. 
Possible values:  0 -100 
For TV/S-VIDEO/SCART/YPbPr: 
 
For VGA:  
 
For DVI: 
 
 
RECALL 
With this function you reset all parameters of this menu to 
the factory settings. 
 
						

							  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 23 
ADVANCED menu - advanced picture settings 
PICTURE MODE 
With this function you set the picture mode. 
Possible values: MOVIE, SPORT , GAME , VIVID , USER  
 
The following options are only available if you have selected 
the USER  setting under  PICTURE MODE .
 
NOISE REDUCTION 
With this function you set the strength of the noise 
reduction. 
Possible values:  HIGH, NORMAL , LOW  
FILM MODE 
With this function the received video signals are output in 
an aspect ratio of 3:2. 
Possible values:  ON / OFF  
DLC  (Dynamic Lumar Correction) 
With this function you acti vate/deactivate the Lumar 
correction. 
Possible values:  ON / OFF  
SKIN TONE 
With this function you activa te/deactivate the skin-colour 
correction (yellow and red hues). 
Possible values:  ON / OFF  
NATURE COLOR 
With this function you activate /deactivate the natural colour 
correction (blue and green hues). 
Possible values:  ON / OFF  
 
RECALL 
With this function you reset all parameters of this menu to 
the factory settings.
 
 
 
						

							LCD TV MYRICA SE 32 
24 - English A26361-K1085-Z120-1-M119, edition 1 
GEOMETRY menu - picture position and sharpness 
These settings are only available when you use the LCD TV as a monitor for your PC 
(SOURCE=PC). 
 AUTO  (automatic setting) 
With this function you set the picture settings automatically.
 
CLOCK  
With this function you set the fine tuning of the VGA 
alignment for a stable VGA display. 
Possible values:  0 -100 
PHASE  
With this function you set the focus and the sharpness of 
the VGA display. 
Possible values:  0 -100 
H-POSITION  (horizontal position) 
With this function you move the picture to the left or to the 
right. 
Possible values:  0 -100 
V-POSITION (vertical position) 
With this function you move the picture up or down. 
Possible values:  0 -100 
 
RECALL 
With this function you reset all parameters of this menu to 
the factory settings. 
 
 
						

							  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 25 
TV SETUP menu - setting channels 
CH SCAN (automatic programme search) 
With the 
 button you start the automatic programme 
search. 
The automatic programme search must be carried out when 
you want to use your LCD TV for the first time following 
installation. 
A detailed description is provided under Carrying out 
programme search. 
The programmes will be entered in the programme list in 
the order in which they are found. However, you can 
change the order of the programmes later.  
A detailed description is provided under Carrying out 
programme search and Arranging programmes. 
PROGRAM 
With this function you change the order of the programmes 
in the programme list or the properties of the individual 
programme (e.g. porgramme name). 
A detailed description is provided under Arranging 
programmes and Changing programme properties. 
MANUAL SCAN  (manual programme setting) 
With this function you manually set the frequency and TV 
standard of an individual channel. 
The set values remain unchanged until an update is carried 
out. 
A detailed description is provided under Setting the 
channel. 
 
UPDATE SCAN  (update programme list) 
With this function you sear ch for additional programmes 
when a programme search has already been carried out. 
The sorting of the programme list is retained and new 
programmes found are added at the end of the programme 
list. 
 
i  Different programmes are available on some channel
s at different times. As a result, it is 
possible that, depending on the time of a progr amme search, different programmes will be 
found. 
 
 
						

							LCD TV MYRICA SE 32 
26 - English A26361-K1085-Z120-1-M119, edition 1 
AUDIO menu - sound settings 
BALANCE 
With this function you set the balance between the left and 
the right loudspeaker. 
BASS 
This button increases or decreases the bass level. 
Possible values: 0 -100 
TREBLE 
This button increases or decreases the treble level. 
Possible values:  0 -100 
SURROUND 
With this function you acti vate/deactivate the surround-
sound function of your LCD TV. 
Possible values:  ON / OFF  
 
RECALL With this function you reset all parameters of this menu to 
the factory settings. 
SYSTEM menu - system settings 
LANGUAGE 
With this function you set the language of the OSD menu. 
OSD BACKGROUND 
With this function you set the transparency of the OSD 
menu 
Possible values:  OPAQUE, TRANSLUCENT  
 RECALL 
With this function you reset all parameters of this menu to 
the factory settings. 
 
 
						

							  LCD TV MYRICA SE 32 
A26361-K1085-Z120-1-M119, edition 1  English - 27 
Display modes 
Main display mode 
►  Press the SOURCE button on the remote control or on the underside of the\
 LCD TV to select 
the source from which the signal for the main display is to come. 
For the main display you can select one of the following signal sources: 
●  TV 
●  CVBS(AV) 
●  S-VIDEO  
●  SCART1 
●  SCART2 
●  YPbPr 
●  VGA (PC) 
●  DVI 
By pressing the   i button  (15) you display the designation of the currently selected signal sources 
in the upper rihgt corner of the screen (see illustration). 
1 2
4 3
5
7 6
9 8
 
1 =   Displayed  main signal  Signal source Main:
2 =   Main signal 
3 =   Programme 
4 =   Audio mode  Signal source PIP: 
5 =   Sub-signal 
6 =   Programme 
number 
7 =   Audio mode  8 =   Shows the sound source  
(Main or Sub-signal) 
9 =   Displayed Sub-signal 
 
 
						

							LCD TV MYRICA SE 32 
28 - English A26361-K1085-Z120-1-M119, edition 1 
PIP mode (Picture in Picture) 
The LCD TV can also display a sub-video signal in addition to the main video signal. 
The sub-video signal is shown as a PIP display in a window on the main display. 
►  Press the PIPSOURCE (5) button on the remote control to activate the PIP mode. 
►   Press the PIPSOURCE button again to select the source from which the signal for the PIP 
display is to come. 
Depending on which source the signal for the main display comes from, you can use certain sources 
for the signal of the PIP display. 
The following combination options are available to you: 
 Signal 
source
s  Main display 
  TV  AV  SV  SCART 1 SCART 2 VGA  DVI  YPbPr 
TV - - -  -  -    
AV - - -  -  -    
SV - - -  -  -    
SCART 1  -  -  -  -  -    
SCART 2  -  -  -  -  -    
VGA      
- - - 
DVI      - - - 
PIP display 
YPbPr      - - -