Fujitsu P55xts51 Users Manual
Here you can view all the pages of manual Fujitsu P55xts51 Users Manual. The Fujitsu manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 1
English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 Before Use • INFORMATION ............................................................ E-2 • INSTALLATION ........................................................... E-4 Usage • PART NAMES AND FUNCTIONS ............................... E-5 • USING THE REMOTE CONTROL ............................ E-12 • CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT.............................................................. E-14 • BASIC...
Page 2
E-2 INFORMATION • Receptacle Make sure that the power cord’s grounding wire is grounded. The plasma display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced. Contact your dealer for more information. • Have the plasma display inspected and cleaned by your dealer at regular intervals. • Pictures may become “burn-in” into the screen phosphors if the screen left on with same picture or pattern for extended...
Page 3
E-3 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 Display Section AV Selector Section ACCESSORIES One power cable One System cable (picture)One System cable (audio) Two small ferrite cores One big ferrite core No.:SFT-72SN Mfr.:TKK No.:ZCAT1518-0730 Mfr.:TDK Two AA batteries One remote control One power cable Two users manuals ManualManual One big ferrite core No.:SFT-72SN Mfr.:TKK MHD01862_E.book 3 ページ ２００５年１１月２５日 金曜日 午後８時５４分
Page 4
E-4 INSTALLATION To prevent the plasma display’s internal components from overheating, make sure that the plasma display is installed in a well-ventilated location. Be sure to use the optional stand, wall-mounting unit or the other mounting unit when installing the plasma display. Also, be sure that your dealer performs the installation. See the appropriate instruction manual for additional information on the mounting hardware you select. To prevent an accident and ensure safety in the event of an...
Page 5
E-5 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 PART NAMES AND FUNCTIONS DISPLAY SECTION – FRONT Power indicator lamp This lamp shows the state of the power supply. Lit (red): Stand-by state Lit (green): Power ON state Flashing (red or green): Malfunction (Flashes differently depending on the type of malfunction.) Remote control signal receiver Receives signals from the remote control. Input mode selector button Input mode selector button Switches the input modes...
Page 6
E-6 PART NAMES AND FUNCTIONS (Continued) /l power switch If this button is pressed when the power indicator lamp is off, the indicator lamp will light. The power can be turned on and the standby mode selected by using the remote control or the control panel of the display. If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out. *Power is still supplied to parts of the display even if the indicator lamp is off. Display input (picture) terminal Connect this...
Page 7
E-7 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 Power indicator lamp This lamp shows the state of the power supply. Lit (red): Stand-by Lit (green): Power ON Flashing (red or green): Malfunction (Flashes differently depending on the type of malfunction.) Remote control signal receiver Receives signals from the remote control. /l power switch If this button is pressed when the power indicator lamp is off, the indicator lamp will light. The power can be turned on...
Page 8
E-8 PART NAMES AND FUNCTIONS (Continued) Audio input terminals Input audio through the terminals corresponding to the used video input terminals. * The digital input terminals can be matched as desired with the remote control. (See P. E-29.) Audio output terminals For use when the audio from an audio system (amplifier) is used. Video1 input terminal Video2 input terminal Video4 input terminal Connect this terminal to the SCART terminal of your VCR or DVD, etc. * See “SETTING THE INPUT...
Page 9
E-9 English Deutsch Espa ñol Fran çais Italiano Portugu ês 日 本 語 Póññêèé 中文 DESCRIPTION OF INPUT TERMINALS mD-sub input terminal (RGB1, 2 INPUT/mD-sub)Pin No. Input signal Pin No. Input signal 1Red 9— 2 Green 10 Ground 3Blue 11— 4— 12— 5 Ground 13 Horizontal synchronization 6 Ground 14 Vertical synchronization 7 Ground 15 — 8 Ground Frame Ground 2 6 10 14 18 3 7 11 15 194 8 12 16 20 1 5 9 13 17 21 SCART terminal (Video1, 2, 4) Pin No. Input Signal Pin No. Input Signal Pin No. Input Signal 1— 8— 15...
Page 10
E-10 PART NAMES AND FUNCTIONS (Continued) For details, see page Î. REMOTE CONTROL (POWER button) Î E-24 Switches between Power On and Standby. , (STILL button) Î E-29 Displays the screen being watched as the still picture. To return to normal, press this button once again. (WIDE button) Î E-30 Switches the screen size. (TV input mode selector button) Î E-26 Press this button to watch terrestrial broadcastings. (Video input mode selector button) Î E-28 Press this button to switch through...