Funai LT8 M40BB User Manual

12EN
OPERATIONS
Watching a TV Programme
To select a channel
Press [PROG.K / L] (control panel) or [/] 
(remote control) repeatedly to select your desired channel.
or
Press [the Number buttons] to enter a channel number then 
[OK] for quicker access.
 If you want to select the channel 24 without pressing [OK], 
press [2] first, then press [4] within 3 seconds.
To adjust the volume
Press [VOL.X / Y] (control panel) or [+/–] (remote 
control) to adjust the audio volume.
 You can see the volume bar while...

13EN
Sound Select
1)Press [SOUND] to display the currently selected audio 
language and the number of available languages.
2)Press [SOUND] repeatedly to cycle through the available 
audio languages.
1)Press [SOUND] to display the currently selected audio mode.
2)Press [SOUND] repeatedly to cycle through the available 
audio mode.
TV Screen Information
You can see the broadcasting information.
1)Press [I(information)].
 Fewer information menu will appear.
2)Press [I(information)] again to display more...

14EN
EPG (Electronic Programme Guide)
You can easily find a channel or see the detailed channel 
information. EPG gives you scheduled information of the TV 
programmes.
1)Press [GUIDE].
 EPG will appear.
2)Press [K / L] to select a channel, then press [1].
 Press [RED] or [GREEN] to move the channel list to the 
previous or next page.
 Press [OK] to watch the selected channel.
3)Press [K / L] to select a programme.
 Press [RED] or [GREEN] to move the programme list to the 
previous or next day.
...

15EN
Changing the TV Screen Display Mode
You can select your favourite TV screen size.
Press [ASPECT] repeatedly to switch the TV screen display 
mode.
For SD (Standard Definition) video signal
“Auto”
Selects the TV screen display mode automatically.
This is the default.
“Sidebar”
Displays a 4:3 picture at its original size. Sidebars appear on both 
edge of the TV screen.
“Full”
Displays a 4:3 picture at a 16:9 size; the picture is stretched 
horizontally to fill the TV screen.
“Cinema”
Displays a 4:3...

16EN
OTHER SETTINGS
Picture Adjustment
You can adjust the picture settings according to your personal 
preference. These settings are automatically stored after exiting the 
picture menu.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “Picture”, then press [OK].
“Picture Mode”
3)Press [K / L] to select “Picture Mode”.
4)Press [0 / 1] to select the setting (“Standard, Dynamic, 
Movie, News, Personal”) you want.
“Brightness, Contrast, Colour, Hue, Sharpness”
3)Press [K / L] to select the...

17EN
Advanced Picture Adjustment
You can adjust the detailed picture settings according to your 
personal preference.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “Picture”, then press [OK].
3)Press [K / L] to select “Features”, then press [OK].
 “Features” menu will appear.
“DNR (Digital Noise Reduction)”
You can adjust to reduce the appearance of digitizing error caused 
by the compression.
4)Press [K / L] to select “DNR”.
5)Press [0 / 1] to select the setting (“Low, Mid, High”) you...

18EN
PC Settings
You can adjust the PC screen position, clock and phase. Make sure 
your PC is connected.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “Picture”, then press [OK].
3)Press [K / L] to select “PC Settings”, then press [OK].
“Auto Adjustment”
4)Press [K / L] to select “Auto Adjustment”, then press [OK].
 Each setting will be adjusted automatically.
“H.Position, V.Position, Phase, Clock”
4)Press [K / L] to select the item you want, then press [OK].
5)Press [0 / 1] to adjust,...

19EN
“Auto Volume Control”
You can set to keep a constant loudness differential between the 
TV commercials and the programs.
3)Press [K / L] to select “Auto Volume Control”.
4)Press [0 / 1] to select the setting (“On, Off ”) you want.
“Assistive Services”
You can adjust the audio type.
3)Press [K / L] to select “Assistive Services”.
4)Press [0 / 1] to select the setting (“-, Hearing Impaired, 
Visually Impaired”) you want.
5)Press [MENU] to exit.
“Visually Impaired”
Make sure “Visually Impaired” is...

20EN
Audio Language Selection
You can select the main language.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “TV”, then press [OK].
“Audio Language”
3)Press [K / L] to select “Audio Language”.
4)Press [0 / 1] to select the language you want.
“Audio Language 2nd”
3)Press [K / L] to select “Audio Language 2nd”.
4)Press [0 / 1] to select the language you want.
5)Press [MENU] to exit.
“Audio Channel”
3)Press [K / L] to select “Audio Channel”.
4)Press [0 / 1] to select the setting (“Dual1,...

21EN
Analogue Manual Scan
You can adjust an analogue channel individually.
1)Press [MENU] to display the menu.
2)Press [K / L] to select “TV”, then press [OK].
3)Press [K / L] to select “Channel”, then press [OK].
4)Press [K / L] to select “Manual Scan (Analogue)”, then press 
[OK].
5)Press [the Number buttons] to enter the frequency.
 To select 24, enter [0] first, then press [2] and [4].
6)Press [K / L] to select “Scan Up” or “Scan Down”, then press 
[OK].
 Scanning will start automatically.
 When...