GE F650 Manual
Here you can view all the pages of manual GE F650 Manual. The GE manuals for Controller are available online for free. You can easily download all the documents as PDF.
Page 31
GEK-113000-AFF650 DIGITAL BAY CONTROLLER 2-1 F650 Digital Bay Controller Chapter 2: Product Description GE Grid Solutions PRODUCT DESCRIPTION 2.1 F650 Overview F650 is a protection, control, monitoring, metering and registering unit, suitable for many different applications, such as main protection for distribution feeders and transmission lines, as well as backup protection for transformers, busbars, capacitor banks, etc. Overvoltage and undervoltage protection, overfrequency an d underfrequency...
Page 32
2-2F650 DIGITAL BAY CONTROLLER GEK-113000-AF 2.1 F650 OVERVIEW CHAPTER 2: PRODUCT DESCRIPTION Another option provides two 100BaseFX fiber optic ports for redundancy. The Ethernet port supports IEC 61850, Modbus®/ TCP, DNP 3.0 and TFTP protocols, and allows access to the relay via any standard web browser. The IEC 60870-5-104 protocol is supported on the Ethernet port. The Ethernet port also supports the Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) of IEC 62439-3...
Page 33
CHAPTER 2: PRODUCT DESCRIPTION2.2 ANSI DEVICE NUMBERS AND FUNCTIONS GEK-113000-AFF650 DIGITAL BAY CONTROLLER 2-3 2.2 ANSI device numbers and functions Main features available in the relay are gathered in tables below ** These functions are available for firmware version 7.50 or above DEVICE NUMBERPROTECTION & CONTROL FUNCTIONS 25 Synchronism Check 27/27X Bus/Line Undervoltage 32 Sensitive Directional Power 32FP Forward Power 32N Wattmetric Zero-Sequence Directional 46 Negative Sequence T ime...
Page 34
2-4F650 DIGITAL BAY CONTROLLER GEK-113000-AF 2.3 OTHER DEVICE FUNCTIONS CHAPTER 2: PRODUCT DESCRIPTION 2.3 Other device functions *This functionality is availabl e from firmware version 7.00 ** Maximum number of events can vary depend on fi rmware version. See details in section 2.5.3.3 INPUTS/OUTPUTSMETERINGCOMMUNICATIONS 9 Analog Inputs: 5 current inputs (3 for phases, 1 for ground, 1 for sensitiv e ground), 4 voltage inputs (3 for phases, 1 for busbar or auxil iary voltage) Metering Current for...
Page 35
CHAPTER 2: PRODUCT DESCRIPTION2.4 ORDER CODES GEK-113000-AFF650 DIGITAL BAY CONTROLLER 2-5 2.4 Order codes F650 units are supplied as ½ 19” rack, 6 units high, containing the following modules: power supply, CPU, I/O modules, communication modules. The required information to completely define an F650 model is shown on Table 2–1: Table 2-1: Order codes F650---F-G-----DESCRIPTION B Basic Display (See Note 2) M Graphic Display with Standard Symbols (See Note 2) N Graphic Display with IEC symbols...
Page 36
2-6F650 DIGITAL BAY CONTROLLER GEK-113000-AF
2.4 ORDER CODES CHAPTER 2: PRODUCT DESCRIPTION
SPECIAL MODELS MOD001 (Abbreviation +M1): have 6A output contacts instead of 16A.
Notes:
(*) For firmware version 7.00 or above, Port
E is intended for maintenance purposes.
(1) The digit selected for option G must be equal or higher than the d
igit selected for option F for models including boards 4 and 5
only.
F1G5 is a valid selection and F5G1 is an invalid selection.
(2) Display options...
Page 37
CHAPTER 2: PRODUCT DESCRIPTION2.4 ORDER CODES GEK-113000-AFF650 DIGITAL BAY CONTROLLER 2-7 2.4.1 CIO Modules For applications requiring a high number of inputs and outputs, F650 units can be connected to a CIO module (Remote CAN bus I/O module) for using up to 2 additional boards. F650 units allow monitoring and configuring these I/O boards as if they were internal boards, located on slots F and G. In this case, slots are labeled as H and J. The required information to completely define a CIO Module...
Page 38
2-8F650 DIGITAL BAY CONTROLLER GEK-113000-AF 2.5 TECHNICAL SPECIFICATIONS CHAPTER 2: PRODUCT DESCRIPTION 2.5 Technical specif ications TECHNICAL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2.5.1 Protection Phase and Ground protection functions use currents measured through CT inputs for performing internal calculations, while the Neutral protection functions use the current calculated from three phase currents. The sensitive ground protection functions are usually used for applications...
Page 39
CHAPTER 2: PRODUCT DESCRIPTION2.5 TECHNICAL SPECIFICATIONS GEK-113000-AFF650 DIGITAL BAY CONTROLLER 2-9 GROUND TIME OVERCURRENT (51G) Current Input:.............................................................................phasor (without harmonics) or RMS Rated Current: ........................................................................... for connection to 1 or 5 A CTs Pickup Level:............................................................................... 0.05 to 160.00 A in steps of 0.01...
Page 40
2-10F650 DIGITAL BAY CONTROLLER GEK-113000-AF 2.5 TECHNICAL SPECIFICATIONS CHAPTER 2: PRODUCT DESCRIPTION SENSITIVE GROUND TIME OVERCURRENT (51SG) Current Input: ............................................................................. phasor (without harmonics) or RMS Rated Current:............................................................................ for connection to 1 or 5 A CTs Pickup Level: ............................................................................... 0.005 to 16.000 A...
All GE manuals