GE Vivid E9 User Manual

 GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 24 
Raw Compression Enables compression of raw data images upon 
storage and export.  
Max Frame Rate Select 25, 30 or Full (original acquisition) from the 
pop-up menu. 
Compression Select compression type or no compression. 
Quality Set picture quality from 1 to 100%. A low picture quality level 
allows high data compression, while a high picture quality restrains 
the compression. 
Allow Multiframe : Allow cineloop storage. 
Connection...

 GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 25 
Additional Outputs 
Use Additional outputs to configuration of the P1, P2 and Record 
buttons on the Control panel. Several outputs such as Video Print, 
Laser print, DICOM storage...etc. can be associated to these buttons 
(i.e. pressing P1 can result in printing to a printer and storage to a 
DICOM media). 
 
P1 / P2 / Record button configuration 
In Button field select P1, P2 or Record. 
Select an output device in the Available output...

 GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 26 
 DICOM 
Image compression Select compression mode from the pop-up menu. 
Quality When JPEG compression is selected, adjust the picture quality 
between 1 and 100%. A low picture quality level allows high data 
compression, while a high picture quality restrains the compression. 
Image frames Select between: 
 Single: stores single frame only 
 Multiple: stores cineloop 
 Secondary Capture: screen shot 
Capture Area Select between: 
...

 GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 27 
Dataflow: allows you to adjust the settings of the selected dataflow 
and associated services. Selecting a dataflow customizes the 
ultrasound system to work according to the services associated with 
the selected dataflow. 
Button: allows you to assign a pre-configured output service (or set of 
output services) to the Print keys on the control panel. 
Removable Media: enables formatting (DICOM, database, or blank 
formatting) and DICOM...

 GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 28 
Device 
To add a new device: Press Add and type the device name in the 
Name field. Type the device’s =P address in the IP Address field. 
  
Preset Parameter Descriptions 
Add - add a device. Remove - delete a device. 
Ping: Use Ping to confirm that the device is connected. 
Properties: Name Type the name of the device. 
Properties: IP Address Type the device’s =P address. 
Properties: AE Title AE Title of the LOGIQ E9. NOTE: Only...

 GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 29 
Connectivity Services Preset Menu, New Device 
 
The Services screen has the following sections of information: 
Destination Device - lists information about destination devices. You 
can select from a list of currently existing devices. 
Service Type to Add - lists information about services for the 
destination device. You can add services, select from a list of currently 
existing services, and remove services. 
Service Properties -...

 GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 30 
  
 
DICOM Image Storage Preset Parameter Descriptions: 
Allow Multiframe Select to allow cine loop storage. 
Allow raw data Select to save data in both TruAccess (raw data) and 
DICOM format. Clear to save in DICOM format only. 
Compression Select the compression type: None, Rle, Jpeg, or 
Jpeg2000. 
Max Framerate Select the maximum frame rate: Full, 25, or 30. 
Color Support Select: Mixed, Gray or Color 
Reopen per image When selected,...

 GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 31 
DICOM Print Preset Parameter Descriptions: 
Vendor Specify PACS Vendor. This enables annotation on patient 
information since by definition patient information is missing on the 
title bar. 
Format Indicates how many prints to print per page, for example, 1,1, 
1,2, 1,3, up to 7,5. Partial prints are displayed as one print job. 
Priority Specify the print job priority: High, Medium, or Low. 
Medium Select the print medium: Clear Film,...

 GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 32 
DICOM Query/Retrieve 
DICOM Query/Retrieve provides a list of patients sorted by 
query parameters. 
 
 
 
If you have problems with slow responses from DICOM servers, you 
can try increasing the time-out in the DICOM server properties dialog: 
Utility -> Connectivity -> Service -> Properties-> Maximum Retries 
and Timeout 
 Slow response time may result in images being re-sent automatically 
and low transfer rates. The retry settings can...

 GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 33 
allowed: Patient Name, Patient ID, Modality, Scheduled Procedure 
Start Date, Start Time, and End Time. 
Tags (at least one) The name of a tag selected to use for search 
criteria. 
Properties: Value Type the value of the Selected Tag item. For 
example, if you select Referring Physician’s Name in the Select Tag 
field, youcan enter the name of the physician in the Value field. 
Properties: Don’t Use Select to turn off the selected search...