GoPro Hero3 White User Manual

6061
To Secure Camera in Housing:
1.  Open housing and drop camera into position.
2.  Make sure the seal around the backdoor is free of debris.
3.  Close the housing backdoor and squeeze it closed to ensure a 
good seal.
4.  Pivot the hinged arm backwards and hook the lip of the latch into 
the grooved top of the housing backdoor.
5.  Push the latch down to snap it into place.
Slim housing surfboard mount installation
Slim housing remove camera
Slim housing insert camera
Slim housing closed Swapping...

6263
/ Camera Housing
SWAPPING BACKDOORS 
You can switch the backdoor of your HERO3 White camera to suit your 
activity and shooting conditions.
To Change the Backdoor: 1.  Open the backdoor of the housing so that it is hanging downwards.
2.  Pull downwards on the backdoor until it snaps free from the hinge.
3.  Line up replacement backdoor into the hinge opening.
4.  Push upwards on the backdoor until it clicks into place.
Slim housing surfboard mount installation
Slim housing remove camera
Slim housing...

6465
/ Using the Mounts
ATTACHING YOUR CAMERA TO MOUNTS 
To attach your HERO3 White camera to a mount, you need a Quick 
Release Buckle, thumb screw or hardware depending on the mount you   
are using. For more information on mounts, visit gopro.com/support .
Quick Release  Buckle Thumb Screw
HousingComplete Unit
USING CURVED + FLAT ADHESIVE MOUNTS  
The Cur ved + Flat Adhesive Mounts make it easy to attach the camera 
to cur ved and flat sur faces of helmets, vehicles and gear. Using the 
Quick Release...

6667
/ Using the Mounts/ Frequently Asked Questions
MY GOPRO WON’T POWER ON 
Make sure your GoPro is charged. To charge your camera, use the 
included USB cable and a computer. You can also use the GoPro Wall 
or Auto Charger.
MY GOPRO WON’T RESPOND WHEN I PRESS A BUTTON  
Press and hold the 
Power/Mode  button [
  ] for 8 seconds to reset 
your camera. This reset saves all of your content and settings, and 
powers off your camera.
MY PLAYBACK IS CHOPPY  
Choppy playback is typically not a problem with...

68
/ Customer Support
/ Regulatory Information
/ Trademarks
GoPro, HERO, the GoPro logo, the GoPro Be a Hero logo, BacPac, 
Protune, SuperView, and Wear It. Mount It. Love It. are trademarks or 
registered trademarks of GoPro, Inc. in the US and internationally. 
Other names and marks are the proper ty of their respective owners.
GoPro is dedicated to providing the best possible 
service. To reach GoPro Customer Support, visit 
 
gopro.com/support.
To see the complete list of countr y cer tifications,...