GTE Omni Scbs Installation And Maintenance Manual

Review Exercise (1.1) - Installation 
INSTRUCTIONS: 
THE FOLLOWING EXERCISE CONSISTS OF MULTIPLE CHOICE, FILL IN THE BLANK OR MATCHING 
TYPE QUESTIONS. ALL AVAILABLE RESOURCES (I.E. STUDENT WORKBOOK, NOTES, AND GTEP 
MANUAL) MAY BE USED AS REFERENCES. SUBMIT EXERCISE TO INSTRUCTOR FOR GRADING 
WHEN LAST QUESTION HAS BEEN COMPLETED. 
1. 
2. 
3. 
4. 
5. 
6. (TRUE OR FALSE) 
THE OMNI SBCS SYSTEM REQUIRES ADDITIONAL COOLING. 
(TRUE OR FALSE) 
THE OMNI SBCS POWER SUPPLY WILL ACCEPT EITHER 110 VAC, 220 VAC, OR...

7. (TRUE OR FALSE) GTE’ OMNL’SBGS CARD SLOTS 06 THROUGH 18 CAN CONTAIN LINE OR TRUNK CARDS. 
8. (TRUE OR FALSE) 
CARD SLOTS 19,20, AND 21 ARE RESERVED FOR COMMON CONTROL CARDS. 
9. THE TWO RS-232-C PORTS AVAILABLE ON THE SYSTEM CABINET FOR THE PORTABLE MAINTENANCE PANEL OR THE 
SMDR PRINTER ARE 
OR 
MATCH THE FOLLOWING CARDS WITH THE CORRECT DESCRIPTION: 
10. 
11. 
12. 
13. 
14. 
15. 
16. 
17. 
18. 
19. 
20. 
21. CPM CARD 
MEM CARD 
SWC CARD 
RGEN CARD 
8EKC CARD 
8SLC CARD 
4BWC CARD 
2TTE CARD 
2TTL...

MATCH THE FOLLOWING COMPONENTS WITH THE CORRECT DESCRIPTION: 
22. cs-10 
23. cs-20 
24. CSD 
25. BLF/DSS A. 
B. 
C. 
D. 
26. PMP 
E. 
27. SMDR 
28. MUSIC-ON-HOLD 
29. SLT 
30. FLOPPY DISKETTE 
DRIVE F. 
G. 
H. 
I. DTMF OR DIAL PULSE (ROTARY) TELEPHONE INSTRUMENT 
ELECTRONIC KEY TELEPHONE WITH 10 PROGRAMMABLE BUTTONS AND 
MONITOR CAPABILITIES 
MICROCOMPUTER USED FOR SYSTEM DATA BASE ADMINISTRATION AND 
MAINTENANCE 
OPTIONAL UNIT USED TO DECREASE TIME ASSOCIATED WITH SAVING OR 
LOADING THE CUSTOMIZED DATA...

1.37  

TEM INSTAL ATION 
Cabinet Installation 
1.38  

1.2 Enabling Objective/ 
binet Inst 
GIVEN: 0 
GTE OlVlNl SBCS WITH MOUNTING BRACKET, CABINET, AND POWER SUPPLY 
0 
GTE OMNI SBCS PCB CARDS 
0 
#6 AWG CABLE, POWER SUPPLY CABLE, AND HARDWARE 
0 
GTE OMNI SBCS COURSE AND SITE DOCUMENTATION PACKAGE 
0 
STANDARD INSTALLATION TOOLS 
0 
REVIEW EXERCISE 
ACTION: 0 
0 
0 
0 
0 
CRITERIA: 0 
0 MOUNT AND INSTALL SYSTEM CABINET AND POWER SUPPLY. 
CONNECT POWER SUPPLY CABLE. 
GROUND WIRE TERMINALS TO COLD WATER GROUND AND CONNECT SIGNAL 
WIRE GROUND. 
INSERT AND...

ask Installation Se 
(1) 
(2) 
(3) 
(4) 
(5) 
(6) 
(7) 
(8) 
(9) 
(10) 
(11) 
(12) INSTALL MOUNTING BRACKET. 
MOUNT AND INSTALL CABINET AND POWER SUPPLY. (NOTE: DO NOT POWER 
ON SYSTEM UNTIL CARDS AND PERIPHERALS HAVE BEEN INSTALLED). 
GROUND POWER SUPPLY AND CABINET. 
INSTALL COMMON CONTROL CARDS, LINE CARDS, AND TRUNK CARDS. 
INSTALL CABLES FROM CABINET AND RECEPTACLES TO CDF CROSS 
CONNECTION BLOCKS. 
WIRE ALL STATION AND TRUNK CROSS CONNECTIONS. 
INSTALL PERIPHERAL INSTRUMENTS (E.G., STATION...

(1) 
(2) 
(3) 
 lh MOUNTING 
““7\‘1 MOUNTING 
EQu’PMENTeE “I& 
CABINET 
MOUNT EQUIPMENT CA5lNET TO THE MOUNTING BRACKET BY 
LOWERING THE CABINET ONTO THE BRACKETS. 
AFTER CABINET IS SECURELY MOUNTED, THEN INSTALL THE 
POWER SUPPLY. 
SECURE BOTH CABINET AND POWER SUPPLY WITH THE SCREWS 
PROVIDED. 
1.42  

Cabinet - Power Supply Cable 
TO POWER 
SUPPLY 
UNIT TO 
EQUIPMENT 
CABINET 
SAFETY 
KEY 
SAFETY 
KEY 
BOWER 
SUPPLV 
RECEPTACLE 
FRONT VIEW OF CONNECTORS 
LOCATION OF RECEPTACLES 
CABLE FOR 
CABINET-POWER SUPPLY CONNECTION 
NOTE: CONNECT POWER SUPPLY CABLE TO EQUIPIVIEMT CABINET 
ONLY WHEN SY IMSTALLATBO PROCEDURE HAS BEEN 
COMPLETED. 
1.43