Haier Afd634cx Instructions For Use

							Preparation prior to use
Remove all package parts
Please also remove the foam base and the adhesive tape fixing accessories.
Check accompanying accessories and documents
Check the items inside the package box against the
Packing List. Please inquire with the purchase shop if
there is any discrepancy.
Install the handles
(
) Take out the two handles from the
accessory box and insert them in the handle seats
respectively as shown in the figure. Secure the
handles on the doors with the supplied (4) screws
from bottom to upper direction.AFT63
0IX/ AFT630IBAFL631CB/AFL631CS/AFD631CX/AFD631CB/A
FD631CS/AFD630IX/AFD630IB/AFD630IS/
Move the refrigerator into a proper location
(See section “Placing environment”)
It is advisable to clean the cabinet before use
Please clean the inside and outside of the refrigerator with
water before putting into any food in it.
Idle standing
After the appliance has been leveled and cleaned, let it
remain idle for at least 6 hours before switching it on so as to
ensure its normal running.
8
 
						

							Preparation prior to use
Connection to power supplyWhen the refrigerator is connected to power supply, the fridge temperature and freezer
temperature are automatically set to 5 and -18 respectively.
Operation modes of the refrigeratorManual adjustment mode: can set temperature by pressing the temperature setup key
(see “Function description” hereafter).
Loading the refrigerator with foodLoad the refrigerator with food after it has been operates for
a period and the inside is cool enough.
Some time will be required for the refrigerator to reach the set temperature when
the setting is changed. The length of this period depends on the difference between
the existing and set temperatures, ambient temperature, door opening frequency
and the amount of food in storage. Note
9
 
						

							Function introduction
1 Models: CFE533CW/CFE533AW/CFE633CW
Control panel
Super cooling buttonFridge storage
temperature
setup knobPower
IndicatorFreezer storage
temperature
setup knobSuper freezing
button
Initial powering on
Upon initial powering on, the power indicator will illuminate. There will be alarm due to high
temperature in the freezer storage compartment. You can cancel the alarm by pressing any key.
The temperature in the fridge storage compartment can be set by turning the fridge storage
temperature setup knob. There are three temperature positions for refrigerating: Holiday, Moderate
and Super Cool.
The temperature in the freezer storage compartment can be set by turning the freezer storage
temperature setup knob. There are three temperature positions for freezing: Weak, Moderate and
Super Freeze.
Select this function after you have put fresh food in the fridger storage compartment. Press the super
cooling button, the refrigerator activates this function and corresponding indicator illuminates. This
function will automatically deactivate when the temperature decreases to the required level. You can
also deactivate it by pressing the super cooling button again.
When the temperature in the refrigerator storage compartment is too low, the super-cooling function
may not work. That is, when you press the “super-Cooling” button once, the buzzer will beep once
and the indicator will not blink, meaning the temperature in the refrigerator storage compartment is too
low and the super-cooling function doesn't need to be activated.
Select this function after you have put large amount of food in the freezer storage compartment. Press
the super freezing button, the refrigerator activates this function and corresponding indicator
illuminates. This function will become automatically deactivate after 24 hours. You can also deactivate
it by pressing the super freezing button again.
Turning the fridge storage temperature setup knob to “Holiday” will activate the holiday function of the
fridge storage compartment. It will operate at a relatively high temperature. (Please remove any fresh
food from the fridge storage compartment and close the door before activating this function)
The display screen will turn off automatically 1 minute after an operation is finished. It will be lit up by
opening the door or pressing any key. (Alarm does not light up the display screen)
When the refrigerator door is open for more than 3 minutes, the super cooling indicator will flash and
the buzzer will sound 3 beeps every 30 seconds. The buzzer can be silenced by closing the door or
pressing any key.Fridge storage temperature setup
Freezer storage temperature setup
Super cooling
Super freezing
Holiday function
Display control
Door open alarming
10
 
						

							Function introduction
Freezing storage temperature setup
Super cooling
Super freezing
Holiday function
Display control
Door open alarming
Over temperature alarm
Turning off the fridge storage compartment
Turning off the refrigerator
Press key A6 or A7 to set the freezer storage temperature. The freezer storage temperature cycles
from -16 to -24 . It will be confirmed automatically 5 seconds after the operation is finished or by
pressing any other key.
Select this function after you have put fresh food in the fridge storage compartment. Press key A3,
and this function is activated and the corresponding indicator illuminates. This function will
automatically deactivate when the temperature decreases to the required level. You can also
deactivate it by pressing key A3 again.
Select this function after you have put large amount of food in the freezer storage compartment.
Press key A8, this function is activated and the corresponding indicator illuminates. This function will
become inactive automatically after 24 hours. You can also deactivate it by pressing key A8 again.
Press key A2, corresponding indicator illuminates and the holiday function of the fridge storage
compartment is activated. It will operate at a relatively high temperature in Holiday mode. The fridge
storage temperature will be indicated as “-” (Please take out the fresh food in the refrigerator and
close the door before activating this function). Press key A2 again, and the corresponding indicator
goes off and the refrigerator comes into normal control.
The display screen will turn off automatically 1 minute after an operation is finished. It can be lit up by
opening the door or pressing any key. (Alarm does not light up the display screen)
When the refrigerator door is open for more than 3 minutes, the alarm indicator will flash and the
buzzer will sound 3 beeps every 30 seconds. The buzzer can be silenced by closing the door or
pressing key A9.
When the temperature in the freezer storage compartment rises to a certain value, the alarm indicator
will illuminate solid and the buzzer will sound 1 beep every second. The buzzer can be silenced when
the temperature in the freezer storage compartment drops to a specified level or key A9 is pressed.
Press and hold key A1 for 3 seconds, and the corresponding indicator will turn off and the fridge
storage compartment will be turned off while the freezer storage compartment operates normally. The
fridge storage temperature indication icon will also go off. Press and hold key A1 for 3 seconds again,
the corresponding indicator will illuminate, the fridge storage compartment will be turned on, and the
fridge storage temperature indication icon will recover.
When the temperature in the refrigerator storage compartment is too low, the super-cooling function
may not work. That is, when you press the “super-Cooling” button once, the buzzer will beep once
and the indicator will not blink, meaning the temperature in the refrigerator storage compartment is
too low and the super-cooling function doesn't need to be activated.
12
 
						

							Function introduction
14
Fridge storage temperature setup
Press key A2 until icon D flashes. Then, press key A3 or A4 to set the temperature. The refrigerating
storage temperature cycles from 2 to 8. After you have set it to the desired value, press key A5 to
confirm.
Note: Flashing of icon D is accompanied by flashing of icon E
Press key A2 until icon H flashes. Then, press key A3 or A4 to set the temperature. The freezing
storage temperature cycles from -16 to -24. After you've set it to the desired value, press key A5 to
confirm.
Note: Flashing of icon H is accompanied by flashing of icon F
Freezer storage temperature setup
Super cooling
Holiday function
Super freezing
Ice making function (only on models with an icemaker)
Icemaker's water injection time adjustment (only on models with an icemaker)
Display control
Door open alarming
Press key A2 until icon B flashes. Then, press key A5 to confirm the super cooling function. Icon B
will illuminate solid. You can deactivate the super cooling function with the same operation.
Press key A2 until icon C flashes. Then, press key A5 to confirm the holiday function. Icon C will
illuminate solid. You can deactivate the holiday function with the same operation.
Press key A2 until icon I flashes. Then, press key A5 to confirm the super freezing function. Icon I will
illuminate solid. You can deactivate the super freezing function with the same operation.
Press key A2 until icon J flashes. Then, press key A5 to confirm the ice making function. Icon J will
illuminate solid. You can deactivate the ice making function with the same operation.
Press key A2 until icon K flashes. Then, press key A5 to confirm the icemaker's water injection time
adjustment. Icon K will illuminate solid. The water injection time will be indicated with icon H and icon
D. For example, if the time is 4.0s, icon H will be 4 and D will be 0. Press key A3 or A4 to set the time
in an increment of 0.5s. It cycles from 2s to 7s. After you have set it to the desired value, press key
A5 to confirm. Icon K will go off. You can exit the icemaker's water injection time adjustment with the
same operation.
Note: this operation can be performed only when the ice making function is selected.
The display screen will dim 1 minute after an operation is finished. It will recover to normal
brightness when you open the door or press any key. (Alarm does not light up the display screen)
When the fridge storage compartment door is open for more than 3 minutes, icon G will flash and the
buzzer will give out 3 beeps every 30 seconds. If you close the door, the alarm will be silenced and
icon G will go off. You can also silence the buzzer by pressing key A5. When the temperature in the refrigerator storage compartment is too low, the super-cooling function
may not work. That is, when you press the “super-Cooling” button once, the buzzer will beep once
and the indicator will not blink, meaning the temperature in the refrigerator storage compartment is
too low and the super-cooling function doesn't need to be activated.
Note: If the ice machine is not installed, the H icon on the display panel will be displayed as “Er”.
 
						

							Function introduction
15 Over temperature alarming
Switching off the fridge storage compartment
Switching off the refrigerator
Error indication
When the temperature in the freezer storage compartment rises to a certain value, icon G will
illuminate solid and the buzzer will sound 1 beep every second. When the temperature in the freezer
storage compartment drops to a specified level, the alarm will silence and icon G will go off. You can
also silence the buzzer by pressing key A5.
Press and hold key A1 for 3 seconds, the fridge storage compartment will be turned off while the
freezer storage compartment is operating normally. At this time, icon D will go off and icon E will
become dim.
Press and hold key A1 for 3 seconds again, the fridge storage compartment will be turned on, icon D
will recover, and icon E will recover its normal brightness.
Note: if super cooling or holiday function is selected previously, the function will be deactivated and
corresponding icon will turn off when the fridge storage compartment is turned off
Press and hold key A6 for 3 seconds, the display panel will go off and the refrigerator will stop
operating. Press and hold key A6 for 3 seconds again, the display panel will light up and the
refrigerator will start operating normally. This function is not equivalent to turning off the power.
When E or F is displayed due to fault, the refrigerator can still refrigerate. Please contact professional
after sales service personnel as soon as possible.
4 Models: AFT630IX/ AFT630IB Appendix
 
						

							About the fridge storage compartment
Please put the food to be stored for short period or for daily
consumption in the fridge storage compartment:
Although the average temperature in most areas in the fridge storage
compartment can be regulated between 0 and 10 , extended
period of food storage is not recommended. The fridge storage
compartment should only be used for short-term storage.
Adjusting shelf height
The shelf can be relocated to accommodate food size or height. To
adjust the height of a shelf, remove it first in this way: uplift its front
edge and then pull it out.
To install the shelf, put the dogs on both sides of the shelf on the
supporting ribs and push it to the most inward end.
Fruit & Vegetable box
Fresh control box
Disassemble of Clean the bottle
The refrigerator has a crisper. You can adjust the humidity inside it
according to the properties of the foods.
Turning the humidity control button rightward enables the
crisper to keep in a higher humidity suitable for cucumbers, grapes,
Chinese gooseberries, persimmons, etc.
Turning the humidity control button leftward enables the crisper
to keep in a lower humidity suitable for strawberries, oranges, beans,
garlic, watermelon, plums, tomatoes, etc.
The temperature in this box is kept at approx 0 , it may be slightly
changed due to the different ambient temperature or refrigerator
working style. It is suitable to store fresh fish, meat and cooked food
in 1~2 days.
To take out a bottle guard, uplift the bottle guards in direction and
grip both sides and pull it out in direction . After cleaning, install it
with the operation in the reversed direction.
16
 
						

							About the fridge storage compartment
Use of the foldaway shelfFig. shows the extended state of the foldaway shelf in which
you can put lower food containers.
Fig. shows the folded state of the foldaway shelf in which
you can put higher food containers.
To fold the shelf from state to state , simply push structure
A upwards, and push structure B inward in the direction of the
arrow shown in the figure.
To extend the shelf from state to state , push structure A
upwards, and pull structure B in the direction of the arrow
shown in the figure.
Use of the wire wine holderFig. shows the folded state of the wire wine holder. In this
state large space can be spared.
Fig. shows the extended state of the wire wine holder. In
this state it can hold various wines.
To extend it from state to state , simply pull the wire
down.The maximum load of the bottle holder is 10 kg.
To fold it from state to state , simply push the wire up.
Notemake sure to keep the two ends of a shelf on the same level.
Otherwise it may fall or the food on it may dump.
Recommended storage areas for various foods
As cold air circulates inside the refrigerator, there is
temperature difference inside the fridge storage
compartment. Different foods should be placed in
different areas according to their properties.
Eggs, butter, cheese and etc.
Drinks, canned food and etc.
Seasonings and pickled food
Beverages, canned food, cake, etc.
Wine, champagne, etc.
Milk, cheese, etc
Cooked meat, fresh fish and meat, etc.
Fruit, vegetables, salad, etc.
Lamp in the fridge storage compartment and its replacement
Parameters of the lamp: 12V, max 5W(the power depends on the model). The lamp
adopts LED as its light source, featuring low energy consumption and long service life. If
there is any abnormality, please contact the after-sales service personnel.
17