Haier Hl32r-b Manual

VIDEO S-VIDEO Y
Y
Pb
Pb
Pr
PrL-AUDIO R
L-AUDIO- RL-AUDIO- RL-AUDIO- R
L-AUDIO- RVIDEO2
11
COMPONENT INOPTICAL
OUTAV OUTVIDEO INANT IN
VIDEO S-VIDEO 
L-AUDIO-R
L-AUDIO- RL-AUDIO- R
VIDEO
1
AV OUTVIDEO INANT INHow to connect
1. Connect the DVD video outputs (COMPONENT) to 
the Y Pb Pr jacks on the TV and connect the DVD audio 
outputs to the YPbPr Audio IN  jacks on the TV, as 
shown in the figure.
2. If your DVD only has an S-VIDEO output jack, 
connect  this to  the S-VIDEO input on the TV.  as shown 
in...

L-                  - RVGAVGA AUDIO YYPbPbPrPrL-AUDIO- RL-AUDIO- R2211HDMI INVGA INCOMPONENT INOPTICAL
OUTDVI
AUDIO
Digital Set-top BoxThis TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive 
Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).How to connect
Use the...

L-                  - RVGAVGA AUDIO YYPbPbPrPrL-AUDIO- RL-AUDIO- R2211HDMIINVGA INCOMPONENT INDVI
AUDIOHow to connect
1. To get the best picture quality, adjust the VGA graphics card  to 1024x768 .
2. Use the TV`s VGA or DVI (Digital Visual Interface)Audio IN port for audio connections, depending on your  computer  
connector.
  If the graphic card on the computer does not output analog and digital RGB simultaneously, connect only one of  
either VGA IN or  HDMI IN to display the VGA on the TV.
  If the...

VIDEO S-VIDEO 
L-AUDIO-R
L-AUDIO- RL-AUDIO- R
VIDEO
1
AV OUTVIDEO INANT INWhen the source device(DVD player or Set Top Box) supports HDMI
How To Connect
1. Connect the source device to HDMI port of this TV with an HDMI cable(not supplied with this product).
2. No separated audio connection is necessary.
How To Use
If the source device supports Auto HDMI function, the output resolution of the source device will be automatically 
set to 1280x720p.
If the source device does not support Auto HDMI, you need...

HDMI Cable
(not supplied with the product)
HDMI to DVI Cable
(not supplied with the product)
 Analog Audio Cable
(Stereo to RCA type)
(not supplied with the product)InstallationCable sampleOwner s Manual   15 

ANT INTO USE AC POWER SOURCEUse the AC polarized line cord provided for 
operation on AC. Insert the AC cord plug into 
a standard polarized AC outlet.Note
 Never connect the AC line cord plug to other 
than the specified voltage. Use the 
attached power cord only.
 If the polarized AC cord does not fit into a non-
polarized AC outlet, do not attempt to file or cut 
the blade. It is the user`s responsibility to have 
an electrician replace the obsolete outlet.
 If you cause a static discharge when...

InstallationOwner s Manual  17Removing the table stand and installing a
wall mount bracketRemove 6X M4 screws securing the
stand to the TV, then remove the stand.Use 4X M6 screws to secure the wall
bracket (not supplied) to the back of your TV.HL26R,HL32R,HL40R,HL42R 

Choose the Menu LanguageWhen you start using your set for the first time, you must 
select the language which will be used for displaying menus 
and indications.In the manual, the OSD   (on screen display) may be 
different from your TV`s,  because it is just an example to 
help you with the TV operation.
There are several options you might need to set up in order 
for your TV to work properly.  Read the instructions that 
follow.Initial Setup: Set according to the screen display.Note
If the TV in power...

This TV set has two methods to set channels, which are 
respectively Channel Scan,  Channel Skip.
 In this section, how to use the remote control  to set 
channel is explained. You can also use buttons on the TV  to 
set channel.Note
The Channel menu will be only operated  in normal TV mode. Channel menuOperationOwner s Manual  191  Press MENU button and then use   /   button to select
    Channel menu.
2  Press   or OK button and then use   /   button to 
    select Tuner.
3  Press   button  Select...

Operation20   TV LCD-TFT1 
 Also can enter channel number directly,eg:2-0.
   Using CH+/- buttons.
  Press CH+ button to select a channel number in 
     number increasing direction.
  Press CH- button to select a channel number in 
      number decreasing direction.
NoteIf skip is ON on one channel, press CH+/- button, the 
channel will not appear.
2Select the desired soundPress VOL-/+  buttons on the remote or the front of the 
TV set to adjust the volume level. The range is 0~100. 
When the volume...