Hitachi 42pd6000ta Users Manual

ENGLISH 
 
 31
 
  OPERATING INSTRUCTIONS (continued) 
 
  System Menu 
 
TV/Video Mode 
 
 
 
Selected characters  W  X Setup hint  
Signal Format  (off the function)  -  Press the ENTER button  to show the information of the current input signal. 
Advanced  Press ENTER button to select the following functions 
3D Comb  On         Off 
  Use only for the NTSC system. Impr
ove the quality as good as Super-video 
input. (Available for TV/Component signals.) 
Gamma        2.2            2.6           2.8...

 
 
32 
 
  OPERATING INSTRUCTIONS (continued) 
 
   System Menu (continued) 
 
TV/Video Mode  
Selected characters  W  X Setup hint  
Channel 
Number Decrease channel 
number  Increase channel 
number  This is used to input the channel number for the channel you would like to 
insert in the sort list after you found the channel form “Channel Frequency”
function. 
System          NTSC       PAL B/G    
 
     SECAM DK         PAL I 
 
     SECAM BG       PAL D/K  Select the system through the 6...

ENGLISH 
 
 33
 
  OPERATING INSTRUCTIONS (continued) 
 
  System Menu (continued) 
 
PC Mode  
Selected characters  W  X Setup hint  
Signal Format  (off the function)  -  Press the ENTER button  to show the information of the current input signal. 
Advanced  Press ENTER button to select the following functions 
Gamma        2.2            2.6           2.8   
  Adjust to preference. 
Panel Lock On         Off 
  This is for locking out the control panel function.   
Adjust to prevent children from...

 
 
34 
 
  OTHER FUNCTIONS 
 
   Audio Switching 
 
A2 / NICAM / Sound Multiplex (TV mode) 
• The I/II button in remote control is us eful for NICAM and sound multiplex signals. 
Otherwise pressing this button will have no effect. 
 
BILINGUAL / DUAL sound broadcast 
When bilingual program is received, sound mode display appears as shown on right. 
Press the I/II button to select  the sound to be heard. 
Each time the button is pressed,  5¾I5¿ Language A,  5¾II5¿ Language B,  5¾I/II 5¿Language A/B or...

ENGLISH 
 
 35
 
  OTHER FUNCTIONS (continued) 
 
  Signal Check (Analog RGB mode) 
 
Changes in the signal status are displayed on the screen as they arise. 
Status   Display  Action 
When Mode Display is set to 
ON, the input signal is 
switched or when the 
RECALL button is pressed.  A guide is displayed for the 
input terminal and the 
horizontal and vertical sync 
frequency.   
When the sync signal is no 
longer detected. 
• A guide displays No Input   
  Signal, and Power Save   
  (for approx. 5...

 
 
36 
 
  OTHER FUNCTIONS (continued) 
 
   Power Save Mode 
 
When the Analog RGB input is selected 
• When this unit is connected to a VESA DPMS  computer, the Power Save (Off) mode can be set to be activated automatically when the  
  computer is not being used to reduce power consumption by this unit. 
 
Horizontal  Yes  No Yes No RGB sync  signal  Vertical Yes  Yes No No 
PC signal  Active (normal display) Blank (no display) 
Operation mode  On  Off 
Indicating lamp  Lights green  Lights orange...

ENGLISH 
 
 37
 
  TROUBLESHOOTING 
 
  Symptoms That Seemingly Appear to be Failures 
 
Make the checks suggested below depending on the symptoms  observed. If the symptoms remain uncorrected, contact 
your dealer. 
 
 
 
Symptom   Point to check  See page
• No picture with the power-indicating   
 lamp off. 
 • Check the way the power cord is connected. 
• Press the power switch. 
     23 
     24 
• The message “No Input Signal. Going to 
  suspend” or “Power Save” is displayed.
• No picture with the...

 
 
38 
 
  TROUBLESHOOTING (continued) 
 
   Symptoms That Seemingly Appear to be Failures (continued) 
 
Symptom   Point to check  See page
• There are locations on the scr een that are different from the 
 periphery (*). 
*Points that do not light, points  with brightness different from 
  that of the periphery, points wi th color different from that of 
  the periphery, etc.  • High-precision technology is used to manufacture the   
  plasma display panel, However in some cases, there are 
  minor...

ENGLISH 
 
 39
 
  TROUBLESHOOTING (continued) 
 
  Actions to Correct Abnormal Displays 
 
Depending on the kind of system equipment used, images  may not be displayed normally. In this case, make the 
adjustments suggested below. (only for PC RGB) 
Symptom 1  Text displayed across the screen appears vertically st
reaked, with some characters blurred (Figure 1). 
(PC RGB input). 
Example  Figure 1 
    
 
1) Press the MENU button. The Main Menu will be displayed. 
2) Press the 
▼ button and select...

 
 
40 
 
  PRODUCT SPECIFICATIONS 
 
 
Display dimensions  Approx. 42 inches (926 (H) x 525 (V) mm, diagonal 1064mm) Panel 
Resolution  1024(H) x 1024 (V) pixels 
Net dimensions  1036 (W) x 713 (H) x 93 (D) mm 
Net weight 35 kg 
Temperature  Operating : 5°C to 35°C, Storage : 0°C to 40°C Ambient 
conditions 
Relative humidity  Operating : 20% to 80%, Storage : 20% to 90% (non-condensing) 
Power supply  AC100 - 240V, 50/60Hz 
Power consumption/at standby   350W /